Forum Discussion

JasonRkr's avatar
JasonRkr
Level 4
10 months ago

Identify Disk Manufacturer on the 5230 Expansion Shelf

Good morning, all.  Short of pulling the drive and looking, is there a way to get the disk manufacturer info from a 5230 appliance?  I'm able to see limited info in the appliance WebUI and through th...
  • quebek's avatar
    quebek
    10 months ago

    Hello

    how about this outcome?

    you have to be in manage/software to run firmware status - also what release you are on?

    NBUAPPNAMEs.Software> Firmware Status
    +-------+----------------+---------+--------------+------------------------+-----------------------------------------------+------------------------------------------------+----------------------+
    | Index | Component Type | Vendor | Model | Location | Current Firmware Version | Recommended Firmware Version | Firmware Status |
    +-------+----------------+---------+--------------+------------------------+-----------------------------------------------+------------------------------------------------+----------------------+
    | | | | | | | | |
    | 1 | BIOS | Intel | S2600WTT | | SE5C610.86B.01.01.0015.012820160943-1.41.9579 | SE5C610.86B.01.01.1029.090220201031-1.61.12401 | upgrade required |
    | | | | | | | | |
    | 2 | HDD | Seagate | ST1000NM0023 | ctlr:0 encl:252 slot:0 | 0006 | E007 | upgrade required |
    | | | | | | | | |
    | 3 | HDD | Seagate | ST1000NM0023 | ctlr:0 encl:252 slot:1 | 0006 | E007 | upgrade required |
    | | | | | | | | |
    | 4 | HDD | Seagate | ST1000NM0023 | ctlr:0 encl:252 slot:2 | 0006 | E007 | upgrade required |
    | | | | | | | | |
    | 5 | HDD | Seagate | ST1000NM0023 | ctlr:0 encl:252 slot:3 | 0006 | E007 | upgrade required |
    | | | | | | | | |
quebek's avatar
quebek
Moderator

Hello

how about this outcome?

you have to be in manage/software to run firmware status - also what release you are on?

NBUAPPNAMEs.Software> Firmware Status
+-------+----------------+---------+--------------+------------------------+-----------------------------------------------+------------------------------------------------+----------------------+
| Index | Component Type | Vendor | Model | Location | Current Firmware Version | Recommended Firmware Version | Firmware Status |
+-------+----------------+---------+--------------+------------------------+-----------------------------------------------+------------------------------------------------+----------------------+
| | | | | | | | |
| 1 | BIOS | Intel | S2600WTT | | SE5C610.86B.01.01.0015.012820160943-1.41.9579 | SE5C610.86B.01.01.1029.090220201031-1.61.12401 | upgrade required |
| | | | | | | | |
| 2 | HDD | Seagate | ST1000NM0023 | ctlr:0 encl:252 slot:0 | 0006 | E007 | upgrade required |
| | | | | | | | |
| 3 | HDD | Seagate | ST1000NM0023 | ctlr:0 encl:252 slot:1 | 0006 | E007 | upgrade required |
| | | | | | | | |
| 4 | HDD | Seagate | ST1000NM0023 | ctlr:0 encl:252 slot:2 | 0006 | E007 | upgrade required |
| | | | | | | | |
| 5 | HDD | Seagate | ST1000NM0023 | ctlr:0 encl:252 slot:3 | 0006 | E007 | upgrade required |
| | | | | | | | |
JasonRkr's avatar
JasonRkr
Level 4
10 months ago

quebek,

Thank you for sharing that.  I'm running v3.2 and while the Vendor field is missing it does at least provide a "FW Component" column that contains the disk model.  Like the snip you provided, I have disk model ST1000NM0023 in the primary appliance and then disk model ST3000NM0023 in the expansion shelf.

Regards,

Jason