Hi,
i asked the administration team of clients that :
we need to run this commads and tasks on All the following Servers:
LS0-EN 10.200.200.11
LS1-EN 10.200.200.12
LS2-EN 10.200.200.13
LS3-EN 10.200.200.14
LS4-EN 10.200.200.15
LS-NF 10.200.200.18
voyence1 10.200.200.100
1-Create /usr/openv/netbackup/logs/bpcd folder on All the clients , after that send me the log of " bpcd.txt "
2- Does the clients vi /usr/openv/netbackup/bp.conf have a SERVER = media server name If not, then add it.
SERVER = media server name
3- Adding /etc/hosts entry on All the clients
4- Check ports 1556, 13720, 13782 ,13724 are opened on firewall
5-Verify firewall is disabled on All the clients
but they need a document that confirm to disable firwall as it was a security issue is there is a document for this specific point ???
------------------
After that i run the command :
/usr/openv/netbackup/bin/admincmd/./bptestbpcd -client <client_name> -verbose -debug
the result is only client "voyence1" can see the log and it is as follow:
10:22:14.976 [27610] <2> bpcd main: offset to GRMT -7200
10:22:14.976 [27610] <2> logconnections: BPCD ACCEPT FROM 10.1.129.90.56328 TO 10.200.200.100.13724
10:22:14.976 [27610] <2> bpcd main: setup_sockopts complete
10:22:14.983 [27610] <2> bpcd peer_hostname: Connection from host m4 (10.1.129.90) port 56328
10:22:14.983 [27610] <2> bpcd valid_server: comparing m4 and m4
10:22:14.983 [27610] <4> bpcd valid_server: hostname comparison succeeded
10:22:14.984 [27610] <2> bpcd main: output socket port number = 1
10:22:25.029 [27610] <2> bpcd main: Duplicated vnetd socket on stderr
10:22:25.029 [27610] <2> bpcd main: <---- NetBackup 6.5 0 ------------initiated
10:22:25.029 [27610] <2> bpcd main: VERBOSE = 0
10:22:25.029 [27610] <2> bpcd main: Not using VxSS authentication with m4
10:22:25.098 [27610] <2> bpcd main: BPCD_PEERNAME_RQST
10:22:25.098 [27610] <2> bpcd peer_hostname: Connection from host m4 (10.1.129.90) port 56328
10:22:25.167 [27610] <2> bpcd main: BPCD_HOSTNAME_RQST
10:22:25.237 [27610] <2> bpcd main: BPCD_CLIENTNAME_RQST
10:22:25.307 [27610] <2> bpcd main: BPCD_GET_VERSION_RQST
10:22:25.377 [27610] <2> bpcd main: BPCD_GET_PLATFORM_RQST
10:22:25.470 [27610] <2> bpcd main: BPCD_GET_VERSION_RQST
10:22:25.532 [27610] <2> bpcd main: BPCD_GET_VERSION_RQST
10:22:25.587 [27610] <2> bpcd main: BPCD_GET_VERSION_RQST
10:22:25.657 [27610] <2> bpcd main: BPCD_READ_HOST_CONFIG_RQST
10:22:25.727 [27610] <2> bpcd main: BPCD_GET_STDOUT_SOCKET_RQST
10:22:25.727 [27610] <2> bpcd main: socket port number = 1
10:22:35.857 [27610] <2> bpcd main: Connected on output socket
10:22:35.857 [27610] <2> bpcd main: Skipping shutdown of send side of stdout.
10:22:35.857 [27610] <2> bpcd main: Duplicated socket on stdout
10:22:35.859 [27610] <2> bpcd main: BPCD_DISCONNECT_RQST
10:22:35.859 [27610] <2> bpcd exit_bpcd: exit status 0 ----------->exiting
10:25:32.154 [30561] <2> bpcd main: offset to GMT -7200
10:25:32.154 [30561] <2> logconnections: BPCD ACCEPT FROM 10.1.129.90.56402 TO 10.200.200.100.13724
10:25:32.154 [30561] <2> bpcd main: setup_sockopts complete
10:25:32.154 [30561] <2> bpcd peer_hostname: Connection from host m4 (10.1.129.90) port 56402
10:25:32.155 [30561] <2> bpcd valid_server: comparing m4 and m4
10:25:32.155 [30561] <4> bpcd valid_server: hostname comparison succeeded
10:25:32.155 [30561] <2> bpcd main: output socket port number = 1
10:25:42.281 [30561] <2> bpcd main: Duplicated vnetd socket on stderr
10:25:42.281 [30561] <2> bpcd main: <---- NetBackup 6.5 0 ------------initiated
10:25:42.281 [30561] <2> bpcd main: VERBOSE = 0
10:25:42.281 [30561] <2> bpcd main: Not using VxSS authentication with m4
10:25:42.349 [30561] <2> bpcd main: BPCD_PEERNAME_RQST
10:25:42.349 [30561] <2> bpcd peer_hostname: Connection from host m4 (10.1.129.90) port 56402
10:25:42.418 [30561] <2> bpcd main: BPCD_HOSTNAME_RQST
10:25:42.488 [30561] <2> bpcd main: BPCD_CLIENTNAME_RQST
10:25:42.558 [30561] <2> bpcd main: BPCD_GET_VERSION_RQST
10:25:42.628 [30561] <2> bpcd main: BPCD_GET_PLATFORM_RQST
10:25:42.699 [30561] <2> bpcd main: BPCD_GET_VERSION_RQST
10:25:42.769 [30561] <2> bpcd main: BPCD_GET_VERSION_RQST
10:25:42.839 [30561] <2> bpcd main: BPCD_GET_VERSION_RQST
10:25:42.908 [30561] <2> bpcd main: BPCD_READ_HOST_CONFIG_RQST
10:25:42.979 [30561] <2> bpcd main: BPCD_GET_STDOUT_SOCKET_RQST
10:25:42.979 [30561] <2> bpcd main: socket port number = 1
10:25:53.108 [30561] <2> bpcd main: Connected on output socket
10:25:53.108 [30561] <2> bpcd main: Skipping shutdown of send side of stdout.
10:25:53.108 [30561] <2> bpcd main: Duplicated socket on stdout
10:25:53.110 [30561] <2> bpcd main: BPCD_DISCONNECT_RQST
10:25:53.110 [30561] <2> bpcd exit_bpcd: exit status 0 ----------->exiting
10:26:42.364 [31867] <2> bpcd main: offset to GMT -7200
10:26:42.364 [31867] <2> logconnections: BPCD ACCEPT FROM 10.1.129.90.56419 TO 10.200.200.100.13724
10:26:42.364 [31867] <2> bpcd main: setup_sockopts complete
10:26:42.364 [31867] <2> bpcd peer_hostname: Connection from host m4 (10.1.129.90) port 56419
10:26:42.364 [31867] <2> bpcd valid_server: comparing m4 and m4
10:26:42.364 [31867] <4> bpcd valid_server: hostname comparison succeeded
10:26:42.365 [31867] <2> bpcd main: output socket port number = 1
10:26:52.479 [31867] <2> bpcd main: Duplicated vnetd socket on stderr
10:26:52.479 [31867] <2> bpcd main: <---- NetBackup 6.5 0 ------------initiated
10:26:52.479 [31867] <2> bpcd main: VERBOSE = 0
10:26:52.479 [31867] <2> bpcd main: Not using VxSS authentication with m4
10:26:52.548 [31867] <2> bpcd main: BPCD_PEERNAME_RQST
10:26:52.548 [31867] <2> bpcd peer_hostname: Connection from host m4 (10.1.129.90) port 56419
10:26:52.618 [31867] <2> bpcd main: BPCD_HOSTNAME_RQST
10:26:52.688 [31867] <2> bpcd main: BPCD_CLIENTNAME_RQST
10:26:52.758 [31867] <2> bpcd main: BPCD_GET_VERSION_RQST
10:26:52.828 [31867] <2> bpcd main: BPCD_GET_PLATFORM_RQST
10:26:52.898 [31867] <2> bpcd main: BPCD_GET_VERSION_RQST
10:26:52.968 [31867] <2> bpcd main: BPCD_GET_VERSION_RQST
10:26:53.038 [31867] <2> bpcd main: BPCD_GET_VERSION_RQST
10:26:53.108 [31867] <2> bpcd main: BPCD_READ_HOST_CONFIG_RQST
10:26:53.178 [31867] <2> bpcd main: BPCD_GET_STDOUT_SOCKET_RQST
10:26:53.178 [31867] <2> bpcd main: socket port number = 1
10:27:03.297 [31867] <2> bpcd main: Connected on output socket
10:27:03.297 [31867] <2> bpcd main: Skipping shutdown of send side of stdout.
10:27:03.297 [31867] <2> bpcd main: Duplicated socket on stdout
10:27:03.299 [31867] <2> bpcd main: BPCD_DISCONNECT_RQST
10:27:03.299 [31867] <2> bpcd exit_bpcd: exit status 0 ----------->exiting
11:33:38.545 [24154] <2> bpcd main: offset to GMT -7200
11:33:38.546 [24154] <2> logconnections: BPCD ACCEPT FROM 10.1.129.90.58759 TO 10.200.200.100.13724
11:33:38.546 [24154] <2> bpcd main: setup_sockopts complete
11:33:38.546 [24154] <2> bpcd peer_hostname: Connection from host m4 (10.1.129.90) port 58759
11:33:38.546 [24154] <2> bpcd valid_server: comparing m4 and m4
11:33:38.546 [24154] <4> bpcd valid_server: hostname comparison succeeded
11:33:38.546 [24154] <2> bpcd main: output socket port number = 1
11:33:48.678 [24154] <2> bpcd main: Duplicated vnetd socket on stderr
11:33:48.678 [24154] <2> bpcd main: <---- NetBackup 6.5 0 ------------initiated
11:33:48.678 [24154] <2> bpcd main: VERBOSE = 0
11:33:48.678 [24154] <2> bpcd main: Not using VxSS authentication with m4
11:33:48.751 [24154] <2> bpcd main: BPCD_HOSTNAME_RQST
11:33:48.820 [24154] <2> bpcd main: BPCD_DISCONNECT_RQST
11:33:48.820 [24154] <2> bpcd exit_bpcd: exit status 0 ----------->exiting
11:33:58.909 [24201] <2> bpcd main: offset to GMT -7200
11:33:58.909 [24201] <2> logconnections: BPCD ACCEPT FROM 10.1.129.90.58782 TO 10.200.200.100.13724
11:33:58.909 [24201] <2> bpcd main: setup_sockopts complete
11:33:58.910 [24201] <2> bpcd peer_hostname: Connection from host m4 (10.1.129.90) port 58782
11:33:58.910 [24201] <2> bpcd valid_server: comparing m4 and m4
11:33:58.910 [24201] <4> bpcd valid_server: hostname comparison succeeded
11:33:58.910 [24201] <2> bpcd main: output socket port number = 1
11:34:09.027 [24201] <2> bpcd main: Duplicated vnetd socket on stderr
11:34:09.027 [24201] <2> bpcd main: <---- NetBackup 6.5 0 ------------initiated
11:34:09.027 [24201] <2> bpcd main: VERBOSE = 0
11:34:09.027 [24201] <2> bpcd main: Not using VxSS authentication with m4
11:34:09.096 [24201] <2> bpcd main: BPCD_GET_VERSION_RQST
11:34:09.166 [24201] <2> bpcd main: BPCD_DISCONNECT_RQST
11:34:09.166 [24201] <2> bpcd exit_bpcd: exit status 0 ----------->exiting
11:34:19.229 [24632] <2> bpcd main: offset to GMT -7200
11:34:19.229 [24632] <2> logconnections: BPCD ACCEPT FROM 10.1.129.90.58796 TO 10.200.200.100.13724
11:34:19.229 [24632] <2> bpcd main: setup_sockopts complete
11:34:19.230 [24632] <2> bpcd peer_hostname: Connection from host m4 (10.1.129.90) port 58796
11:34:19.230 [24632] <2> bpcd valid_server: comparing m4 and m4
11:34:19.230 [24632] <4> bpcd valid_server: hostname comparison succeeded
11:34:19.230 [24632] <2> bpcd main: output socket port number = 1
11:34:29.354 [24632] <2> bpcd main: Duplicated vnetd socket on stderr
11:34:29.354 [24632] <2> bpcd main: <---- NetBackup 6.5 0 ------------initiated
11:34:29.354 [24632] <2> bpcd main: VERBOSE = 0
11:34:29.354 [24632] <2> bpcd main: Not using VxSS authentication with m4
11:34:29.424 [24632] <2> bpcd main: BPCD_HOSTNAME_RQST
11:34:29.494 [24632] <2> bpcd main: BPCD_GET_STDOUT_SOCKET_RQST
11:34:29.494 [24632] <2> bpcd main: socket port number = 1
11:34:39.623 [24632] <2> bpcd main: Connected on output socket
11:34:39.623 [24632] <2> bpcd main: Skipping shutdown of send side of stdout.
11:34:39.623 [24632] <2> bpcd main: Duplicated socket on stdout
11:34:39.625 [24632] <2> bpcd main: BPCD_GET_VERSION_RQST
11:34:39.628 [24632] <2> bpcd main: BPCD_GET_PLATFORM_RQST
11:34:39.702 [24632] <2> bpcd main: BPCD_FORK_CMD_RQST
11:34:39.702 [24632] <2> bpcd main: fork cmd = /usr/openv/netbackup/bin/bpbkar bpbkar -r 2678400 -ru root -dt 0 -to 0 -clnt voyence1 -class netscout -sched incr_edl -st CINC -bpstart_to 300 -bpend_to 300 -read_to 18000 -blks_per_buffer 512 -use_otm -fso -b voyence1_1339321173 -kl 60 -use_ofb
11:34:39.702 [24632] <2> bpcd main: filter type = -1
11:34:39.702 [24632] <2> bpcd main: backuptime before fork = 0
11:34:39.702 [25025] <2> bpcd main: Converting args string into an argv
11:34:39.702 [25025] <2> bpcd main: Done converting args string into an argv
11:34:39.702 [25025] <2> bpcd main: child_args[0] = /usr/openv/netbackup/bin/bpbkar
11:34:39.702 [25025] <2> bpcd main: child_args[1] = bpbkar
11:34:39.702 [25025] <2> bpcd main: child_args[2] = -r
11:34:39.703 [25025] <2> bpcd main: child_args[3] = 2678400
11:34:39.703 [25025] <2> bpcd main: child_args[4] = -ru
11:34:39.703 [25025] <2> bpcd main: child_args[5] = root
11:34:39.703 [25025] <2> bpcd main: child_args[6] = -dt
11:34:39.703 [25025] <2> bpcd main: child_args[7] = 0
11:34:39.703 [25025] <2> bpcd main: child_args[8] = -to
11:34:39.703 [25025] <2> bpcd main: child_args[9] = 0
11:34:39.703 [25025] <2> bpcd main: child_args[10] = -clnt
11:34:39.703 [25025] <2> bpcd main: child_args[11] = voyence1
11:34:39.703 [25025] <2> bpcd main: child_args[12] = -class
11:34:39.703 [25025] <2> bpcd main: child_args[13] = netscout
11:34:39.703 [25025] <2> bpcd main: child_args[14] = -sched
11:34:39.703 [25025] <2> bpcd main: child_args[15] = incr_edl
11:34:39.703 [25025] <2> bpcd main: child_args[16] = -st
11:34:39.703 [25025] <2> bpcd main: child_args[17] = CINC
11:34:39.703 [25025] <2> bpcd main: child_args[18] = -bpstart_to
11:34:39.703 [25025] <2> bpcd main: child_args[19] = 300
11:34:39.703 [25025] <2> bpcd main: child_args[20] = -bpend_to
11:34:39.703 [25025] <2> bpcd main: child_args[21] = 300
11:34:39.703 [25025] <2> bpcd main: child_args[22] = -read_to
11:34:39.703 [25025] <2> bpcd main: child_args[23] = 18000
11:34:39.703 [25025] <2> bpcd main: child_args[24] = -blks_per_buffer
11:34:39.703 [25025] <2> bpcd main: child_args[25] = 512
11:34:39.703 [25025] <2> bpcd main: child_args[26] = -use_otm
11:34:39.703 [25025] <2> bpcd main: child_args[27] = -fso
11:34:39.703 [25025] <2> bpcd main: child_args[28] = -b
11:34:39.703 [25025] <2> bpcd main: child_args[29] = voyence1_1339321173
11:34:39.703 [25025] <2> bpcd main: child_args[30] = -kl
11:34:39.703 [25025] <2> bpcd main: child_args[31] = 60
11:34:39.703 [25025] <2> bpcd main: child_args[32] = -use_ofb
11:34:39.703 [25025] <2> bpcd main: Before execvp of command
11:34:39.703 [24632] <2> bpcd exit_bpcd: exit status 0 ----------->exiting
11:34:59.572 [25072] <2> bpcd main: offset to GMT -7200
11:34:59.572 [25072] <2> logconnections: BPCD ACCEPT FROM 10.1.129.90.58835 TO 10.200.200.100.13724
11:34:59.572 [25072] <2> bpcd main: setup_sockopts complete
11:34:59.573 [25072] <2> bpcd peer_hostname: Connection from host m4 (10.1.129.90) port 58835
11:34:59.573 [25072] <2> bpcd valid_server: comparing m4 and m4
11:34:59.573 [25072] <4> bpcd valid_server: hostname comparison succeeded
11:34:59.573 [25072] <2> bpcd main: output socket port number = 1
11:35:09.687 [25072] <2> bpcd main: Duplicated vnetd socket on stderr
11:35:09.687 [25072] <2> bpcd main: <---- NetBackup 6.5 0 ------------initiated
11:35:09.687 [25072] <2> bpcd main: VERBOSE = 0
11:35:09.687 [25072] <2> bpcd main: Not using VxSS authentication with m4
11:35:09.758 [25072] <2> bpcd main: BPCD_GET_VERSION_RQST
11:35:09.827 [25072] <2> bpcd main: BPCD_GET_VERSION_RQST
11:35:09.897 [25072] <2> bpcd main: BPCD_READ_USERS_CONFIG_RQST
11:35:09.967 [25072] <2> bpcd main: BPCD_GET_VERSION_RQST
11:35:10.037 [25072] <2> bpcd main: BPCD_READ_HOST_CONFIG_RQST
11:35:10.107 [25072] <2> bpcd main: BPCD_DISCONNECT_RQST
11:35:10.107 [25072] <2> bpcd exit_bpcd: exit status 0 ----------->exiting
----------------
but all other clients are not recieve any log from the command
and the output at master server is
for all "LS-NF & LS0-EN& LS1-EN& LS2-EN& LS3-EN& LS4-EN"
10.34.40.570(29341)<2>connectTOBPCD:db_getclient(LS-NF) failed:227
10.39.41.911(29341)<2>local_bpcr_connect :can't connect to client LS-NF
10.39.41.911(29341)<2>connecttoBPCD:bpcd_connect_and_verify(LS-NF, LS-NF) failed :25
<2>bptestbpcd:cannot connect on socket
<2>bptestbpcd:EXIT status =25
cannot connect on socket
db getclient failed 227