Forum Discussion

madhuri's avatar
madhuri
Level 4
11 years ago

cannot connect to client

started backup (backupid=spark4_1392790959) job for XXXXXX, policy XXXXXXXX, schedule Full on storage unit XXXXXX 
2/18/2014 11:27:42 PM - Info bpbrm(pid=7688) connect failed STATUS (18) CONNECT_FAILED 
2/18/2014 11:27:42 PM - Info bpbrm(pid=7688) status: FAILED, (44) CONNECT_TIMEOUT; system: (10061) No connection could be made because the target machine actively refused it. ; FROM 0.0.0.0 TO spark4 135.11.66.121 bpcd VIA pbx 
2/18/2014 11:27:42 PM - Info bpbrm(pid=7688) status: FAILED, (44) CONNECT_TIMEOUT; system: (10061) No connection could be made because the target machine actively refused it. ; FROM 0.0.0.0 TO spark4 135.11.66.121 bpcd VIA vnetd 
2/18/2014 11:27:42 PM - Info bpbrm(pid=7688) status: FAILED, (44) CONNECT_TIMEOUT; system: (10061) No connection could be made because the target machine actively refused it. ; FROM 0.0.0.0 TO spark4 135.11.66.121 bpcd 
2/18/2014 11:27:42 PM - Error bpbrm(pid=7688) Cannot connect toXXXXX

Host properites are no loading we can ping the server we can rdp the server

 

**** Edited by Marianne to insert line-breaks ****

Backup and Recovery
Error messages
NetBackup
  • RamNagalla's avatar
    RamNagalla
    11 years ago

     system: (10061) No connection could be made because the target machine actively refused it. ; FROM 0.0.0.0

    does the client is winodws or unix?

    if windows does it have antivirus running?

    what is the output of

    bptestbpcd -client <clientname> -verbose -debug

    from the Media server?

    enable the bpcd log in the client with Verobse 5 and try the backup again and attach the log.

     

  • RamNagalla's avatar
    RamNagalla
    Moderator
    11 years ago

     system: (10061) No connection could be made because the target machine actively refused it. ; FROM 0.0.0.0

    does the client is winodws or unix?

    if windows does it have antivirus running?

    what is the output of

    bptestbpcd -client <clientname> -verbose -debug

    from the Media server?

    enable the bpcd log in the client with Verobse 5 and try the backup again and attach the log.

     

  • Marianne's avatar
    Marianne
    Level 6
    11 years ago

    Is this a client that has worked before? 
    Or new client that has never worked?

    Please provide all relevant info:

    OS version on client.
    NBU version and patch level on client.

    Have you checked that NBU is up and running on the client?
    OS firewall disabled on client?

    Company firewall between client and server? Port 1556 open in both directions?

    PS:

    In future, please start opening post with description of issue, not just Activity Monitor extract. 
    You may also want to paste the text in Notepad first so that it is properly formatted....

    Thanks!

  • Nicolai's avatar
    Nicolai
    Moderator
    11 years ago

    Look like the Netbackup client is not running or firewalled off by the Windows firewall.

  • Jaime_Vazquez's avatar
    Jaime_Vazquez
    Level 6
    11 years ago

    Nicolai has what I se is the solution.

    NBU client services need to be running on the client. Use "bpps" on the client to see them.

    That would be "bpcd -standalone" and "vnetd -standalone".

    That then just leaves the firewall, which for me is almost always the guilty party.

    Another possible check of connectivity is (from the client):

    bpclntcmd -pn

    That should show "Expecting response from <master_server_name>"

    followed by what the Master thinks the local client is. That is a good way to tie client to Master and Master to client. If the command has a failure, look at the reported NBU status code with "echo %ERRORLEVEL%" on Windows, and "echo $?" on Unix/Linux.

  • Marianne's avatar
    Marianne
    Level 6
    11 years ago

    Cannot be too much of an issue -  there has been no response from @knarra since 19 Feb.

    I have also asked these questions on the same day:

    Have you checked that NBU is up and running on the client?
    OS firewall disabled on client?

    Company firewall between client and server? Port 1556 open in both directions?