DSM has encountered the following busy resource
guys trying to remove the MSDP server by following the below mentioned technote but stuck at POINT 7
http://www.symantec.com/business/support/index?page=content&id=TECH150431
getting the follwoing error..
gssuanbmas01:/usr/openv/netbackup/bin/admincmd # ./nbdevconfig -deletedp -dp gsglgnbapp01_Pool7 -stype PureDisk
DSM has encountered the following busy resource: gsglgnbapp01_Pool7, mount point = PureDiskVolume
failed to delete disk pool, invalid command parameter
gssuanbmas01:/usr/openv/netbackup/bin/admincmd #
i have run nbrbutil to find if there are any processes associated to that media server but there isnt any..
gssuanbmas01:/usr/openv/netbackup/bin/admincmd # ./nbrbutil -dump | grep gsglgnbapp01
gssuanbmas01:/usr/openv/netbackup/bin/admincmd #
i have rebooted the media server that am going to remove but no joy.. i have run couple of times bpimage and nbdelete commands to make sure there its all okay but no joy.
any help would highly be appreciated.
Fixed it.....
there were still couple of images left on the disk pool dont know where they come from..
nbrbutil -resetall led me to check the images again on the disk pool...
Expired the images make sure your disk pool is up as you might have change it to DOWN
run the nbdelete and bpimage cleanup commands again..
and then you should be able to ditch the diskpool.. B*****.. :-)
