Windows partial success

At times, retrying the backup after few hours might help and result with status code 0 (successfull) as you might not find those files busy again during the backup, but that's a rare thing.

Its better to get those excluded if partial success is being reported as skipped again after multiple re-attempts with same files or files from same folder

 

 

Hi

Here are the logs containing the list.

06/30/2015 06:15:53 - mounted 8495L4

06/30/2015 06:15:53 - positioning 8495L4 to file 301

06/30/2015 06:15:55 - positioned 8495L4; position time: 0:00:02

06/30/2015 06:15:55 - begin writing

06/30/2015 06:16:10 - Warning bpbrm (pid=24729) from client bt1shs1zh2: WRN - can't open object:

Shadow Copy Components: (BEDS 0xE000FECB: A failure occurred accessing the backup component

document.)

06/30/2015 06:16:10 - Warning bpbrm (pid=24729) from client bt1shs1zh2: WRN - can't open object:

Shadow Copy Components:\System Service\Windows Internet Name Service\C:_Windows_system32_wins\wins

(BEDS 0xE000FEDD: A failure occurred accessing the object list.)

06/30/2015 06:16:10 - Warning bpbrm (pid=24729) from client bt1shs1zh2: WRN - can't open object:

Shadow Copy Components:\System Service\Windows Management Instrumentation\WMI (BEDS 0xE000FEDD: A

failure occurred accessing the object list.)

06/30/2015 06:16:12 - Warning bpbrm (pid=24729) from client bt1shs1zh2: WRN - can't open object:

System State: (WIN32 -536805685: Unknown error)

06/30/2015 06:16:12 - Warning bpbrm (pid=24729) from client bt1shs1zh2: WRN - can't open file:

System State:\System Files\System Files (WIN32 -536805667: Unknown error)

06/30/2015 06:16:12 - Error bpbrm (pid=24729) from client bt1shs1zh2: ERR - Error encountered while

attempting to get additional files for System State:\

06/30/2015 06:16:12 - Warning bpbrm (pid=24729) from client bt1shs1zh2: WRN - can't open file:

System State:\Automated System Recovery\BCD\BCD (WIN32 -536805667: Unknown error)

06/30/2015 06:16:12 - Warning bpbrm (pid=24729) from client bt1shs1zh2: WRN - can't open file:

System State:\Registry\Registry (WIN32 -536805667: Unknown error)

06/30/2015 06:16:12 - Warning bpbrm (pid=24729) from client bt1shs1zh2: WRN - can't open file:

System State:\Internet Information Services\IISCONFIG (WIN32 -536805667: Unknown error)

06/30/2015 06:16:13 - Warning bpbrm (pid=24729) from client bt1shs1zh2: WRN - can't open file:

System State:\Internet Information Services\IISMETABASE (WIN32 -536805667: Unknown error)

06/30/2015 06:16:13 - Warning bpbrm (pid=24729) from client bt1shs1zh2: WRN - can't open file:

System State:\COM+ Class Registration Database\COM+ REGDB (WIN32 -536805667: Unknown error)

06/30/2015 06:16:14 - Info bptm (pid=24734) waited for full buffer 1 times, delayed 1240 times

06/30/2015 06:16:25 - Info bptm (pid=24734) EXITING with status 0 <----------

06/30/2015 06:16:25 - Info bpbrm (pid=24729) validating image for client bt1shs1zh2

06/30/2015 06:16:26 - Info bpbkar (pid=0) done. status: 1: the requested operation was partially successful

06/30/2015 06:16:26 - end writing; write time: 0:00:31

the requested operation was partially successful (1)

Could anyone make a suggestion how to proceed further?

 

This looks like serious problems with backup of Shadow Copy Components on this client and must be seen as a FAILURE.

What is NBU version on the client?
What Windows version and patch/release level?

Does the logon account for NetBackup Client service on this client have sufficient access to Shadow Copy Components?

Are Microsoft VSS patches/hotfixes up to date?

Any errors in Windows Event logs while this backup is running?

Can Windows Backup utility on the client be used to backup Shadow Copy Components to local disk?

For further troubleshooting, ensure that these log folders exist on the client and that logging level is set to 3 as a minimum:
bpfis, bpbkar

NBU version is 7.6

Does the below article address the issue in any way?

https://support.symantec.com/en_US/article.TECH30634.html

 

The TN that you found is for Backup Exec (see Products link in the doc).

The section about VSS is relevant as that applies to any kind of backup product that need to backup SCC and open files.

Please see all the other questions in my post above....