Forum Discussion

sardeshpande197's avatar
sardeshpande197
Level 4
15 years ago

vxconfigd daemon is not starting

Hi

I have just uninstall vxvm 3.5 and installed VxVM 5.0MP3 but during reboot i got given below error.

 

obpsym: symbolic debugging is available.
Hardware watchdog enabled
NOTICE: VxVM not started
configuring IPv4 interfaces: ce0 ce1 ce2 ce3.
Hostname: sunpocdd1
VxVM  NOTICE V-5-2-3347 Volume Manager not started
WARNING: /ssm@0,0/pci@18,600000/lpfc@1,1/fp@0,0/ssd@w5006048ad52de642,0 (ssd335):
        Corrupt label; wrong magic number

WARNING: /ssm@0,0/pci@19,600000/lpfc@1/fp@0,0/ssd@w5006048ad52de659,0 (ssd140):
        Corrupt label; wrong magic number

vxdctl: Configuration daemon is not accessible
VxVM  NOTICE V-5-2-3365 VxVM not started
The system is coming up.  Please wait.
checking vxfs filesystems

 

Once system comes in single user mode then Ineed to perfom   #vxconfigd -k   -> #vxvol -g <dg name>startall ->mountall 

 

Does anyone ever come across this problem....

Any help would greatly appreciated.

 

Sukrut S

business continuity
Recovering
Storage Foundation
  • avsrini's avatar
    avsrini
    15 years ago

    Hi Sardesh,

    Looks like SF 50MP3 is not configured during install. Try vxinstall command

    and say yes to reconfigure, and respond to 3 questions. It should work after.

     

    Just for info, is rootdisk under SDS control and mirrored? If so there are some known

    issues if the root mirror is not fully synced, it loads old kernel and uses new binary.

    Verify the same and update us.

     

    Regards

    Srini

  • Marianne's avatar
    Marianne
    Level 6
    15 years ago

    Maybe give us a bit more info on steps taken during uninstall and new install?

    Was the boot-disk encapsulated under 3.5? Did you unencapsulate before uninstalling?

    When you installed 5.0MP3 - did you complete the configuration steps at the end?

    Please find the installation log and post as an attachment.

    If you have used 'installer' the log file will be under /opt/VRTS/install/logs/installer-xxxxxx

    Which O/S version on your server?

  • sardeshpande197's avatar
    sardeshpande197
    Level 4
    15 years ago

    This is solaris 9 box. Boot disk is not under veritas control.

     

    Steps to uninstall vxvm 3.5

     

    1) vxdctl stop , vxiod -f set 0

    2)Uninstall VRTS packages excpet VRTSvlic

    3)install VxVM 5.0MP3 through installer

    4)after installation while system was coming up I got the above error.

     

     

    At single user mode I was able to start the vxconfigd -k  (daemon) and start all the volumes ...

  • Marianne's avatar
    Marianne
    Level 6
    15 years ago

    When you installed 5.0MP3 - did you complete the configuration steps at the end?

    Please find the installation log and post as an attachment.

    If you have used 'installer' the log file will be under /opt/VRTS/install/logs/installer-xxxxxx

  • Gaurav_S's avatar
    Gaurav_S
    Moderator
    15 years ago

    Just have a check for install-db file under /etc/vx/reconfig.d/state.d  ?

    If the file is there, remove it & restart your box...


    Also, what does pkgchk shows on VRTSvxvm ?

    # pkgchk VRTSvxvm

     

    Gaurav

  • avsrini's avatar
    avsrini
    Level 4
    15 years ago

    Hi Sardesh,

    Looks like SF 50MP3 is not configured during install. Try vxinstall command

    and say yes to reconfigure, and respond to 3 questions. It should work after.

     

    Just for info, is rootdisk under SDS control and mirrored? If so there are some known

    issues if the root mirror is not fully synced, it loads old kernel and uses new binary.

    Verify the same and update us.

     

    Regards

    Srini