EV Proxy between sites
Hello there, We have one AD/Exchange Organization spanning multiple physical sites enabled for archiving with EV. Are you aware if you can use one EV server as proxy for OWA/OA access across two sites part of the same EV Directory. I want to mention that the two sites are configured as separate EV sites within the Directory. Thanks, Giulio8.4KViews0likes5Comments
Failed Index Volume
We have EV 10.0.3 for Exchange 2007 and recently we ended up with Indexing issue on only Journal mailbox. We cannot search on Journal mailbox from December 2012. Going to Indexing on the EV console we can see 1 failed index. Indexing and searching is fine for all other users. We recently migrated from EV 8 to 10.0.1 and this is where after a while one of he Journal indexing volume (64-bit) failed and this is the only 64 bit indexing for Journal archive. We have tried various fixes including: verifying and Synchronise. Some of the event logs suggested to upgrade to EV 10.0.3 and we done the upgrade but not luck with the fix. Symantec support suggested to use EVSVR to locate the missing items. then we applied EVSVR in report mode and then in repair mode it identified the missing items and deleted them from the indexing. then it was suggested to rebuild the indexes (only for the failed volume) and we done that and completed the rebuilding. the failed index on the Indexing went a way for a short time then restarting the index server it brought back the failed status and showing error id 28998 and 41329 (Error Type: FrenzyErrorDetected). I am not sure what else we need to do as I believe Symantec is running out of options here. Any suggestions or ideas please. thanksSolved4.1KViews0likes8Comments
Migrate Exchange 2010 Archived Mailboxes to O365
One of our clients are migration their Exchange 2010 archived mailboxes to O365. The concern is that when the users are migrated, it will break the link (stub) between legacy EV and destination mailbox (on Exchange online)which will leave the users unable to access the historical data. Is there a way for users to have access to their legacyarchives while the mailbox is being migrated toO365? What are the migration options to maintain the stubb connection intact? Speaking to one 3rd party professional, he suggested that stubs loseconnection will depend how the users are migrated from Exch to O365. What method people follow to ensure continuity of legacy EV system? Any document to support the above discussion would be appreciated.Solved4KViews0likes10Comments
make the Archived PST available via OWA
I have EV Server Version 10.0.4 installed on windows server 2008 ... I use EV to archive PST file that store at user machine and maped to Outlook profile ... my question when user open OWA(Outlook Web Access for Exchange) is there are any way to let user see the PST filesarchived at EV ? I need tomake the Archived PSTavailablevia OWASolved3.9KViews1like6CommentsExtracting Enterprise Vault Archive Data
Hi All, I'm new to Enterprise Vault and I'm having a little trouble putting together an implementation plan for extracting emails out of an Exchange/EV environment using .PST files for import into a brand new environment on a new domain. So far I have come up with the following rough idea: Disable archiving across all mailboxes to prevent any further transfers of data Export all archived mailboxes to individual .PST files and import into new environment Delete all archive stubs from Exchange mailboxes to prevent future conflicts Export all Exchange mailboxes to individual .PST files and import into new environment I was hoping to get some comments on this plan. It might be that there is a far simpler solution that I'm not aware of. The idea of restoring all mail items to their original location is not an option due to capacity reasons. Also, I've been having some trouble researching a method for completing step 1. There doesn't seem to be any way of disabling Enterprise Vault other than setting the archive policy to only capture emails older than 1000 years (or something similar). Am I mistaken here? I would have thought this would be an easy task. Any information would be greatly appreciated!! - ScalliSolved3.8KViews2likes11Comments
Move archive in different EV directory?
Hi, i have a EV 9.02enviroment with100 users and 400 GB data in Physical HW (this physical HW will be shutdown after this process) i have to migrate existing old EV environemnt to new virtual 2012 environment.I will install EV 11.01 latest version(without HW migration process) what is your advice for move archive feauture for carrying old archived data to new EV server? my new server ready to installation.but if i install new binary with new directory name and new site name ; then i have 2 different EV server witin same domain.i can move archives old EV server archives to new one? or what is your other suggestions? -installing under same directory ; can couse problems when deleting old Ev server? - 2 different directory and 2 different site name is better ?then move archive for 80-90 user (i know that move archive works slowly..) can i work with 2 different EV server within same domain? i can see other ev server name in mpvearchive wizard easly?(no need to trust because they are in same domain) thanks...3.5KViews0likes8CommentsVirtual Vault not removed from Outlook...
Hi, Here is my problem: I would like to disable archiving for some ~500 users and delete theirs archives from EV 9.0.2. The problem is that Virtual Vault is still always present in Outlook folder tree and users are able to browse the vault cache. How to remove it for 500 users? Here is what i did (step-by-step): 1. Disable archiving for users from EV console. 2. Synchronize Mailboxes 3. Remove users from the Provisioning group 4. Run Provisioning task 5. Delete archives from EV 6. Uninstall Enterprise Vault add-in from user’s PC The Virtual Vault is always there… Please help!Solved3.5KViews0likes9Comments
Archiving / Enabling mailbox error: Events 2256 3305 3432
Hi everyone! I've seen several posts with similar problems than the following, but any of the proposed solutions worked so far, so I'll try to give as much detail as possible. I had previously installed EV 10 for exchange archiving, exchange 2007 and outlook 2007 all in the same vm for test purposes. Now, I'm making another test, with 3 computers (VMs all with Windows server 2008 R2): WIN-GV6V5SU1CTH.evtest.local is the domain controller and exchange server ev2.evtest.local is the EV server and sql server client.evtest.local is the client (not important right now) The dns of EV2 points to the domain controller and there if i ping evtest.local from EV2 there is reply. After installing EV in the EV2 computer, y run the provisioning task and everything goes right. Afterwards, I go to tools -> enable mailboxes, select my test account which is evuser, next next and I get "Failed to enable the mailbox ''EvUser". First check that the exchange mailbox task for WIN-GV6V5SU1CTH is running. if it is, check that the account you are logged in as has sufficient permissions on the exchange server". After this, the Archiving task state is "Failed". In the event viewer, 3 events appear, with Ids 2256, 3305 and 3432. The two more descriptive are: -3432 One or more errors occurred during the creation of a profile to connect to an Exchange Server. Targeted Exchange Server: WIN-GV6V5SU1CTH Mailbox: SMTP:EVService@evtest.local ConfigureMsgService failed with the following errors: A network error MAPI_E_NETWORK_ERROR has been reported for the following connection points: WIN-GV6V5SU1CTH WIN-GV6V5SU1CTH.evtest.local -3305 The Task 'Exchange Mailbox Archiving Task for WIN-GV6V5SU1CTH' failed to log on to Exchange server 'WIN-GV6V5SU1CTH' using mailbox 'SMTP:EVService@evtest.local'. Please ensure the mailbox has not been hidden, that the server is running and that the Vault account has sufficient permissions on the server. I've run the SetEVPermisssions.ps1 script for my EV account (EVService), and it is the same way that made it work in a single VM in the previous test. I Dtrace'd the archiving task, and the error part is the following (Although attached is the full trace) 4356 16:43:18.328 [3444] (ArchiveTask) <4880> EV:L {CMailboxHelper::CreateProfileAndSessionEx} (Entry) 4357 16:43:18.328 [3444] (ArchiveTask) <4880> EV:M {CMailboxHelper::CreateProfileAndSessionEx:#841} Setting up MAPI profile [VaultMbxAgent-WIN-GV6V5SU1CTH-4880-1346182998-0-328-0] 4358 16:43:18.329 [3444] (ArchiveTask) <4880> EV:L {CMailboxHelper::CreateProfileAndSessionEx:#844} Creating the MAPI profile... 4359 16:43:18.330 [3444] (ArchiveTask) <4880> EV:L {CMailboxHelper::CreateProfileAndSessionEx:#864} Creating the message service (if it doesn't already exist)... 4360 16:43:18.336 [3444] (ArchiveTask) <4880> EV:L {CMailboxHelper::CreateProfileAndSessionEx:#878} Getting the message service table (GetMsgServiceTable)... 4361 16:43:18.336 [3444] (ArchiveTask) <4880> EV:L {CMailboxHelper::CreateProfileAndSessionEx:#881} Querying the returned message service table... 4362 16:43:18.337 [3444] (ArchiveTask) <4880> EV:L {ConfigureMsgServiceAttempt} (Entry) 4363 16:43:18.337 [3444] (ArchiveTask) <4880> EV:L {ConfigureMsgServiceAttempt:#107} Trying ConfigureMsgService using PR_PROFILE_UNRESOLVED_SERVER [WIN-GV6V5SU1CTH], attempt [1] of [5] 4364 16:43:18.370 [3444] (ArchiveTask) <4880> EV:M {ConfigureMsgServiceAttempt:#119} ConfigureMsgService failed: [0x80040115] 4365 16:43:18.870 [3444] (ArchiveTask) <4880> EV:L {ConfigureMsgServiceAttempt:#82} Using provided Global Catalog Server [WIN-GV6V5SU1CTH.evtest.local] 4366 16:43:18.870 [3444] (ArchiveTask) <4880> EV:L {ConfigureMsgServiceAttempt:#107} Trying ConfigureMsgService using PR_PROFILE_UNRESOLVED_SERVER [WIN-GV6V5SU1CTH.evtest.local], attempt [2] of [5] 4367 16:43:18.950 [3444] (ArchiveTask) <4880> EV:M {ConfigureMsgServiceAttempt:#119} ConfigureMsgService failed: [0x80040115] 4368 16:43:19.451 [3444] (ArchiveTask) <4880> EV:L {ConfigureMsgServiceAttempt:#107} Trying ConfigureMsgService using PR_PROFILE_UNRESOLVED_SERVER [WIN-GV6V5SU1CTH], attempt [3] of [5] 4369 16:43:19.483 [3444] (ArchiveTask) <4880> EV:M {ConfigureMsgServiceAttempt:#119} ConfigureMsgService failed: [0x80040115] 4370 16:43:19.984 [3444] (ArchiveTask) <4880> EV:L {ConfigureMsgServiceAttempt:#107} Trying ConfigureMsgService using PR_PROFILE_UNRESOLVED_SERVER [WIN-GV6V5SU1CTH.evtest.local], attempt [4] of [5] 4371 16:43:20.040 [3444] (ArchiveTask) <4880> EV:M {ConfigureMsgServiceAttempt:#119} ConfigureMsgService failed: [0x80040115] 4372 16:43:20.540 [3444] (ArchiveTask) <4880> EV:L {ConfigureMsgServiceAttempt:#107} Trying ConfigureMsgService using PR_PROFILE_UNRESOLVED_SERVER [WIN-GV6V5SU1CTH], attempt [5] of [5] 4373 16:43:20.574 [3444] (ArchiveTask) <4880> EV:M {ConfigureMsgServiceAttempt:#119} ConfigureMsgService failed: [0x80040115] 4374 16:43:20.575 [3444] (ArchiveTask) <4880> EV:H {ConfigureMsgServiceAttempt} (Exit) Status: [<0x80040115>] 4375 16:43:20.575 [3444] (ArchiveTask) <4880> EV:H {CMailboxHelper::CreateProfileAndSessionEx:#950} ConfigureMsgServiceAttempt() failed. 4376 16:43:20.575 [3444] (ArchiveTask) <4880> EV:H {CMailboxHelper::BuildConfigureMsgServiceErrorText:#722} Failed to contact server [SMTP:EVService@evtest.local] due to a network error. 4377 16:43:20.576 [3444] (ArchiveTask) <4880> EV~E Event ID: 3432 One or more errors occurred during the creation of a profile to connect to an Exchange Server. |Targeted Exchange Server: WIN-GV6V5SU1CTH |Mailbox: SMTP:EVService@evtest.local |ConfigureMsgService failed with the following errors: |A network error MAPI_E_NETWORK_ERROR has been reported for the following connection points:|WIN-GV6V5SU1CTH|WIN-GV6V5SU1CTH.evtest.local| | 4378 16:43:20.579 [3444] (ArchiveTask) <4880> EV:M {CMailboxHelper::CreateProfileAndSessionEx:#1021} Cleaning up profile [VaultMbxAgent-WIN-GV6V5SU1CTH-4880-1346182998-0-328-0] following preceding failure. Profile deletion: [0x0] 4379 16:43:20.579 [3444] (ArchiveTask) <4880> EV:H {CMailboxHelper::CreateProfileAndSessionEx} (Exit) Status: [<0x80040115>] I also saw the KB article related to the GC and I run the "fix it for me" msi that they have. Do you have any ideas? Please let me know if there is any more information I can provide. P.S. One extra detail: For creating the 2 vms I did the following: I had a vm with EV and exchange together working. I copied the vm and in VM1 uninstalled EV and sql. On VM2 removed DC role, reinstalled sql, reinstalled Enterprise vault, renamed the computer and pointed to the domain controller VM1. I say it just in case this could have been a problem that I'm missing. Thanks to everyone!Solved3KViews0likes14Commentsunable to install Enterprise Vault Office MailApp
I want to install the Enterprise Vault Office MailApp on Exchange 2013 But somewhere i am doing something wrong. background details: EVserver FQDN: ev.testlab.local EV alias: evserver.testlab.nl Available SSL cert *.domain.nl I have added a wildcard cert on the EV server and assigned it to the default website and set the option "require SSL" I have changed the EV site setting to use HTTPS SSL on 443 for shortcut links. The EV mailapp should be accessible internal and internet. For external connections the url https://evserver.domain.nl wil be used. I have a testuser named testuser1 and its EV enabled. When i want to install the app with this command: $Mbx=get-mailbox testuser1 New-App -OrganizationApp -DefaultStateFo$Mbx = get-mailbox "testuser1" New-App -mailbox $Mbx.LegacyExchangeDN -Url ("http://evserver.testlab.local/EnterpriseVault/OfficeMailAppManifest.aspx?LegacyMbxDn=" + $Mbx.LegacyExchangeDN + "&BaseURL=https://evserver.domain.nl/EnterpriseVault") The error i get is: The app couldn't be downloaded. + CategoryInfo : InvalidData: (:) [New-App], LocalizedException + FullyQualifiedErrorId : [Server=EX2-2013,RequestId=05ad910e-8574-4103-b2d0-d580b8ccbac4,TimeStamp=1/27/2016 1:30 :47 PM] [FailureCategory=Cmdlet-LocalizedException] D6594FEB,Microsoft.Exchange.Management.Extension.NewApp + PSComputerName : ex2-2013.testlab.local If i assemble the url and paste it in the browser of the 2013 server, i get te following output: <?xml version="1.0" encoding="utf-8" ?> - <OfficeApp xmlns="http://schemas.microsoft.com/office/appforoffice/1.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="MailApp"> <Id>0CC6D075-E610-4B8A-90C6-1460E6D4D710</Id> <Version>1.0</Version> <ProviderName>Symantec</ProviderName> <DefaultLocale>en-us</DefaultLocale> <DisplayName DefaultValue="Enterprise Vault" /> <Description DefaultValue="Enterprise Vault saves space in your mailbox by automatically moving emails and their attachments from the folders in your mailbox to an online storage area called a vault. This process is called archiving." /> <IconUrl DefaultValue="https://evserver.testlab.local/enterprisevault/OfficeMailAppIcon.png" /> - <Capabilities> <Capability Name="Mailbox" /> </Capabilities> - <DesktopSettings> <SourceLocation DefaultValue="https://evserver.testlab.local/enterprisevault/OfficeMailApp.htm" /> <RequestedHeight>82</RequestedHeight> </DesktopSettings> - <TabletSettings> <SourceLocation DefaultValue="https://evserver.testlab.local/enterprisevault/OfficeMailApp.htm?Device=Tablet" /> <RequestedHeight>82</RequestedHeight> </TabletSettings> - <PhoneSettings> <SourceLocation DefaultValue="https://evserver.testlab.local/enterprisevault/OfficeMailApp.htm?Device=Phone" /> </PhoneSettings> <Permissions>ReadWriteMailbox</Permissions> - <Rule xsi:type="RuleCollection" Mode="Or"> <Rule xsi:type="ItemIs" ItemType="Message" /> <Rule xsi:type="ItemIs" ItemType="Appointment" /> </Rule> <DisableEntityHighlighting>false</DisableEntityHighlighting> </OfficeApp> What is going wrong.....I am out of optionsSolved2.8KViews1like3Comments
EV Proxy between sites
Hello there, We have one AD/Exchange Organization spanning multiple physical sites enabled for archiving with EV. Are you aware if you can use one EV server as proxy for OWA/OA access across two sites part of the same EV Directory. I want to mention that the two sites are configured as separate EV sites within the Directory. Thanks, Giulio
Move archive in different EV directory?
Hi, i have a EV 9.02enviroment with100 users and 400 GB data in Physical HW (this physical HW will be shutdown after this process) i have to migrate existing old EV environemnt to new virtual 2012 environment.I will install EV 11.01 latest version(without HW migration process) what is your advice for move archive feauture for carrying old archived data to new EV server? my new server ready to installation.but if i install new binary with new directory name and new site name ; then i have 2 different EV server witin same domain.i can move archives old EV server archives to new one? or what is your other suggestions? -installing under same directory ; can couse problems when deleting old Ev server? - 2 different directory and 2 different site name is better ?then move archive for 80-90 user (i know that move archive works slowly..) can i work with 2 different EV server within same domain? i can see other ev server name in mpvearchive wizard easly?(no need to trust because they are in same domain) thanks...