deleting rlink that's having "secondary_config_err" flag
hello, in my VCS global cluster my ORAGrp resource group is partially online since my rvgres is offline, i am suspecting the issue in the below rlink. i am trying to dissociate thi rlink(below:rlk_sys1-DB-rep_DB_r) and dettach it in order to delete it but i am not able to succeed. below are some output from the system. root@sys2# vxprint -P Disk group: DBhrDG TY NAME ASSOC KSTATE LENGTH PLOFFS STATE TUTIL0 PUTIL0 rl rlk_sys1-DB-rep_DB_r DB_rvg CONNECT - - ACTIVE - - rl rlk_sys1-rep_DB-rvg DB-rvg ENABLED - - PAUSE - - root@sys2# vxrlink -g DBhrDG dis rlk_sys1-rep_DB-rvg VxVM VVR vxrlink ERROR V-5-1-3520 Rlink rlk_sys1-rep_DB-rvg can not be dissociated if it is attached root@sys2# vxrlink -g DBhrDG det rlk_sys1-rep_DB-rvg VxVM VVR vxrlink ERROR V-5-1-10128 Operation not allowed with attached rlinks root@sys2# vxedit -g DBhrDG rm rlk_sys1-rep_DB-rvg VxVM vxedit ERROR V-5-1-3540 Rlink rlk_sys1-rep_DB-rvg is not disabled, use -f flag root@sys2# vxedit -g DBhrDG -f rm rlk_sys1-rep_DB-rvg VxVM vxedit ERROR V-5-1-3541 Rlink rlk_sys1-rep_DB-rvg is not dissociated root@sys2# vxprint -Vl Disk group: DBhrDG Rvg: DB-rvg info: rid=0.1317 version=0 rvg_version=41 last_tag=11 state: state=CLEAN kernel=DISABLED assoc: datavols=(none) srl=(none) rlinks=rlk_sys1-rep_DB-rvg exports=(none) vsets=(none) att: rlinks=rlk_sys1-rep_DB-rvg flags: closed secondary disabled detached passthru logging device: minor=26012 bdev=343/26012 cdev=343/26012 path=/dev/vx/dsk/DBhrDG/DB-rvg perms: user=root group=root mode=0600 Rvg: DB_rvg info: rid=0.1386 version=13 rvg_version=41 last_tag=12 state: state=ACTIVE kernel=ENABLED assoc: datavols=sys1_DB_Process,sys1_DB_Script,... srl=sys1_DB_SRL rlinks=rlk_sys1-DB-rep_DB_r exports=(none) vsets=(none) att: rlinks=rlk_sys1-DB-rep_DB_r flags: closed secondary enabled attached logging device: minor=26014 bdev=343/26014 cdev=343/26014 path=/dev/vx/dsk/DBhrDG/DB_rvg perms: user=root group=root mode=0600 please advise regards
VVR - Data status inconsistent - DCM (autosync)
Hi! I’ve configuredVVR 5.1_SP1RP4(Veritas Storage Foundation) on a RHEL 5.9 server. I’ve started yesterday the replication and today (19 hours later) the state of Data Status still isInconsistent. It’s only 1 RVG of 1000 GB. Looks like never ends Autosync, network looks fine, I've copy files between the two hosts and time was normal. I saw that Readback in PROD server is always filled up. I've increased to 256M and still filled up, looks like never flush! [root @ latlap-prd4917 ~] # vxmemstat Fri 12 Dec 2014 06:38:47 PM BRST Pool DG Min Max In Allocated Max Waiting Size Size Use Used ---------- ------- -------- ---------- ---------- ---------- --------- ------- Voliomem - 1024 131072 0 1024 0 no NMCOM-latambpmvvr_rvg vvrdg01 1024 16384 0 1024 0 no RViomem - 1024 131072 0 1024 0 no Readback - 1024 262144 236080 236576 236080 no Other - 1024 131072 0 1024 0 no Source server: latlap-prd4917 Replica server: latlap-cob4917 # vxdisk list DEVICE TYPE DISK GROUP STATUS sda auto:none - - online invalid sdb auto:cdsdisk vvrdisk01 vvrdg01 online sdc auto:cdsdisk vvrdisk02 vvrdg01 online sdd auto:none - - online invalid # vxprint -Pl Disk group: vvrdg01 Rlink: rlk_latlap-cob4917_latambpmvvr info: timeout=500 rid=0.1068 latency_high_mark=10000 latency_low_mark=9950 bandwidth_limit=none state: state=ACTIVE synchronous=off latencyprot=off srlprot=autodcm assoc: rvg=latambpmvvr_rvg remote_host=latlap-cob4917 IP_addr=153.40.227.102 port=4145 remote_dg=vvrdg01 remote_dg_dgid=1418321601.11.latlap-cob4917 remote_rvg_version=30 remote_rlink=rlk_latlap-prd4917_latambpmvvr remote_rlink_rid=0.1065 local_host=latlap-prd4917 IP_addr=144.215.151.70 port=4145 protocol: TCP/IP flags: write enabled attached inconsistent cant_sync connected asynchronous autosync resync_started [root @ latlap-prd4917 ~] # df -h Filesystem Size Used Avail Use% Mounted on […] /dev/vx/dsk/vvrdg01/latambpmvvr 1000G 536M 938G 1% /latambpm/vvr [root @ latlap-prd4917 ~] # vradmin -g vvrdg01 -l repstatus latambpmvvr_rvg Replicated Data Set: latambpmvvr_rvg Primary: Host name: latlap-prd4917 RVG name: latambpmvvr_rvg DG name: vvrdg01 RVG state: enabled for I/O Data volumes: 1 VSets: 0 SRL name: latambpmvvr_srl SRL size: 200.00 G Total secondaries: 1 Secondary: Host name: l atlap-cob4917 RVG name: latambpmvvr_rvg DG name: vvrdg01 Rlink from Primary: rlk_latlap-cob4917_latambpmvvr Rlink to Primary: rlk_latlap-prd4917_latambpmvvr Configured mode: asynchronous Latency protection: off SRL protection: autodcm Data status: inconsistent Replication status: resync in progress (autosync) Current mode: asynchronous Logging to: DCM (contains 996786176 Kbytes) (autosync) Timestamp Information: N/A Bandwidth Limit: N/A [root @ latlap-prd4917 ~] # vxrlink -g vvrdg01 -T status rlk_latlap-cob4917_latambpmvvr Fri 12 Dec 2014 11:26:20 AM BRST VxVM VVR vxrlink INFO V-5-1-4464 Rlink rlk_latlap-cob4917_latambpmvvr is in AUTOSYNC. 996797440 Kbytes remaining. VxVM VVR vxrlink INFO V-5-1-9472 Timestamp is not available when rlink is using DCM # date Fri Dec 12 11:29:28 BRST 2014 # vradmin -g vvrdg01 -l repstatus latambpmvvr_rvg Logging to: DCM (contains 996645888 Kbytes) (autosync) # date Fri Dec 12 11:29:34 BRST 2014 Logging to: DCM (contains 996641792 Kbytes) (autosync) # date Fri Dec 12 11:29:39 BRST 2014 Logging to: DCM (contains 996637696 Kbytes) (autosync) # date Fri Dec 12 11:29:48 BRST 2014 Logging to: DCM (contains 996631552 Kbytes) (autosync) # date Fri Dec 12 11:31:19 BRST 2014 Logging to: DCM (contains 996558848 Kbytes) (autosync) Thanks a lot for any clue about the issue. MaC.
Collection from VRTSexplorer
Dear All I have some enviornments of SFHA and VCS installed on Linux and Solaris servers. I have output of VRTSexplorer logs for every system. As the VRTSexplorer contains almost everything collected, I wanted to know if is it possible to get the following output of these requirements 1. Which license and version and sub-version is installed on system? like for example if version 5.0 is installed which patch version is installed ? I want something except "vxlicrep" 2. If in the case of Replication, which file will give output of Bandwidth limit if it is configured. 3. If in the case of Replication, which file will give output of packet size if it is configured. Any suggession will be appreciated. Assume I just have VRTSexplorer and investigating logs and need to know the following. Regards