Forum Discussion

CRZ's avatar
CRZ
Level 6
11 years ago

NetBackup Appliances 2.6.0.2 is now available!

(crossposted from the Netting Out NetBackup blog)

I’m extremely happy to announce that NetBackup Appliances 2.6.0.2 is now Generally Available!

NetBackup 2.6.0.2 is the latest update for NetBackup 52xx Appliances and the equivalent Appliance patch release to NetBackup 7.6.0.2.  It can be applied in an upgrade to Appliances running ANY 2.5.x or 2.6.0.x version.

This release includes all 568 fixes included in the NetBackup 7.6.0.2 release, including resolutions for most commonly downloaded EEBs, customer escalations, and critical internally found defects.

The 2.6.0.2 release also contains:

  • Customer High Impact Fixes including:
    • Network setting retained during factory reset
    • Allow eth0 configuration (was restricted in 2.6.0.1)
    • No NetBackup restart with storage resize
    • Multi-stream backups for migration tool fixed
    • Clean job cancellation for migration tool
    • SNMP packages added back to allow SNMP daemons to run on Appliance
  • Support for VMware Dynamic Multi-Pathing (DMP)
  • Multiple Security Improvements - most notably, removal/update of all OpenSSL components potentially affected by "Heartbleed"
  • Install/Upgrade client patch size reduction and direct upgrades from 2.5.x to 2.6.0.2
  • CallHome/Supportability enhancements including:
    • Improved monitoring of BBU/SuperCap status
    • Additional CallHome data including the list of installed EEBs and NetBackup version information.
    • CallHome performance improvement through lesser round trips (increased packet size from 8KB to 256KB).
    • Disk SMART errors in the support logs for improved diagnostics

To download 2.6.0.2, please visit the following page:

NetBackup Appliance 2.6.0.2 Release
 http://symantec.com/docs/TECH215209

To check to see if your particular Etrack is resolved in NetBackup 7.6.0.2, please refer to these Release Notes:

Symantec NetBackup 52xx Appliance Release Notes - Release 2.6.0.2
 http://symantec.com/docs/DOC7156

The documentation pack for this release can be found here:

Complete Symantec NetBackup 52xx Appliance Documentation Set - Release 2.6.0.2
 http://symantec.com/docs/DOC7158

The NetBackup Appliances Late Breaking News can be found here:

NetBackup 5xxx appliance series Late Breaking News
 http://symantec.com/docs/TECH145136

Bookmark the NetBackup Appliances Common Topics page to have these and many more useful links handy:

 http://go.symantec.com/nba

Finally, more information on this release can be found by accessing the NetBackup 7.6.0.2 release announcement, which is also available here on Connect:

 http://www.symantec.com/connect/blogs/netbackup-7602-netbackup-76-maintenance-release-2-now-available

--

18 Replies

  • Does anybody know if Netbackup Appliance 5230 can be used as both master server & media server? Symantec is promoting that it can be used as either master or media or both but on the config guide, you can check only one server role. Thanks

  • If you configure appliance as master server, it will act as master & media server, but if you configure your appliance as media then you need to have a seperate master server.

  • Does anyone know what is the latest version download they support 32 bits O/S? My appliance has 2.6.0.2 but the 7.6.0.2 download supports x64 only. My laptop is 32bit therefore need the 32bits admin console.

  • You didn't say what O/S your laptop is on, but assuming it's one that we stopped supporting in 7.6, the last version for you is 7.5.0.7, which equates to 2.5.4 on an Appliance. 

    A 7.5.0.7 won't work too well with a 2.6.0.x Appliance, though, so try to use this as leverage to get an updated laptop.  ;-)

  • My laptop is Windows 7 professional. If you said 7.5.0.7 won't work well with 2.6.0.2, I guess I would pursue a 64 bit laptop. Thank you so much.