SAN Client backup into Netbackup Appliance 5220
- 12 years ago
The SAN Client needs its HBA in intitiator mode which is the default so in theory you should be OK to do what you want but to be honest I would always reccomend a dedicated HBA for FT transfer as it is a little like adding a tape drive on the same port as your disks - it works but isn't usually reccomended
It could also put the data disks on the SAN into the same zones as the Media Server (Appliance) which may not be desirable and likewise the SAN Client seeing all the disks on the SAN via that HBA which again may not be desirable
Depending on the O/S of the client there are also other things to take into consideration such as the effect of SCSI Pass through etc. and any affect that may have
So I believe the answer to your question is actually "yes you can do that" - the issue is "is that best?"
Hope this helps