sagar666
10 years agoLevel 5
Getting error code 2009
Hi,
All Backups are failing with error code 2009. earlier also same issue i follewed below it was working but this time its not working
http://www.symantec.com/business/support/index?page=conte...
- 10 years ago
All compatible drive paths are down.
Check Device Monitor or 'vmoprcmd' command for drive status.
Before you UP drives, you need to find out why they were DOWN'ed in the first place.
Check /var/log/messages and bptm log on media server for clues.Add VERBOSE to /usr/openv/volmgr/vm.conf and restart ltid for increased device-level logging to /var/log/messages.
PS:
Seems you need to make a decision on new hardware sooner rather than later, or get your hardware vendor to fix or replace faulty tape drives and/or library:
NBU is reporting the errors - nothing we can do from NBU side to fix hardware issues.