Forum Discussion
Interrupted system call (4), stat = -2 is a what it says - system call (OS) error. Not NBU.
Mabe you could search OS forums for explanation....
error 24 is a network error. Connection was established initially, but something happened in the network stack that dropped communication.
- mph9996 years agoLevel 6
A perfect oppotunity to repost this ...
I describe the 23/24/25 status codes as follows:
RC=23: Server A sent a IP packet to valid server B, and is waiting for a response packet. It fails to get the response packet within the TIMEOUT window and raises the rc=23.
RC=25: Server A tried to sent IP packet to invalid server B. No connection made so Server A sets rc=25.
RC=24: Server A sends packet to server B and get a response within the TIMEOUT window. But something happens that drops connection between them.
I make an analogy of this communication environment using phone calls:
Person on Phone A calls to phone number B, which connects and they leave a voice mail to call them back. They wait for a call back that does not come and after a specified time, they quit. RC=23.
Person A calls phone number for what he thinks is a valid Phone B. The call does not go through and they hear the message "The number you have dialed is not a working number". RC=25.
Person A calls Person B, they call is picked up but the line connection somehow gets dropped unexpectedly.while communications is in progress. RC=24.
All of these are communication errors of some kind.
For RC=25, the source server may have the wrong target server name in its environment or an invalid/wrong IP address for the target server.
For RC=23, A can talk to B but B cannot talk to A. Could be a source server it does not recognize or it is using the wrong IP address to respond to. Possible bad host name to IP resolution.
RC 24: The toughest of the bunch. A and B know each other correctly. They just can't keep the call going.
I would give credit to my collegue for the excellent analogy, if only I could remember who it was ...
- Marianne6 years agoLevel 6
mph999 wrote:
I would give credit to my collegue for the excellent analogy, if only I could remember who it was ...
I bookmarked it:
Jaime Vazques : https://vox.veritas.com/t5/NetBackup/Error-23/m-p/738836#M201891
Sadly one of the casualties during the Symantec/Veritas split ....
- Tousif6 years agoLevel 6
Yes.. :(
- liuyl6 years agoLevel 6
That is a wonderful analogy explanation!
But I think the error code 24 in my this issue is not equal to the most common error status 24, such as network related problem!
"Child process terminated abnormally with error 24"
It seems that this error 24 should be also the similar property of OS system call,such as “Interrupted system call (4)、stat = -2”
- liuyl6 years agoLevel 6
Now the most strange doubt is the error code of "stat=-2" !
No any clue about it can be found, so perhaps I have to ask this on some OS forum!- Tousif6 years agoLevel 6
Hello,
Have you tried to reboot the tape library and media server?It would be interesting to know what happens on library end once reach the request from Media server to library (I mean library system log).
It seems to be something related to the driver or firmware.
Regards,
- liuyl6 years agoLevel 6
No, we just reboot the RCH, then all right!
- mph9996 years agoLevel 6
Yes, I couldn't find that easily - it'll be out there somewhere I suspect ...
Related Content
- 6 years ago
- 2 years ago