06-06-2013 02:17 AM
Hello. guys. I want to ask maybe a very simple question.
Who knows how to use Bar code label pack? What diference between AOS and AOR labels.
I can't find any information about this.
Thanks in advance.
Solved! Go to Solution.
06-06-2013 02:35 AM
Each tape library vendor has their own specific format for the barcode label. Make sure that you use the correct format. If in doubt, check with the vendor.
If you know the required format, you might want to make your own barcode labels. See my article below
https://www-secure.symantec.com/connect/articles/using-barcode-labels-why-and-how
06-06-2013 02:24 AM
Hi,
Not sure what the difference is to be honest, but you'd simply slap the labels onto the tapes. From there, insert into the library and run a Scan (assuming your library/autoloader) has a barcode reader. It's a faster way to check what tapes are in a library.
The TN below explains how to use barcode labels in BE too:
http://www.symantec.com/business/support/index?page=content&id=TECH92890
Thanks!
06-06-2013 02:35 AM
Each tape library vendor has their own specific format for the barcode label. Make sure that you use the correct format. If in doubt, check with the vendor.
If you know the required format, you might want to make your own barcode labels. See my article below
https://www-secure.symantec.com/connect/articles/using-barcode-labels-why-and-how
06-06-2013 02:44 AM
Thank you very much, guys. This are very helpful links.