Netware 6.0 SP5 Bestart wont start

[Rafael_Tejada]

I have a Compaq Proliant CL380 with NetWare 6.0 and SP5 and Backup Exec for NetWare 9.1 Build 1158.4 with the latest drivers and 9.1 patches. When I load Bestart , it wont load. I tried to replicate the startup.ncf from other servers to this server to try to resolve the start up with bestart. I do notice that in the bkupexec.fax file , theres a driver: not specified section. I'm wondering if its not using the correct drivers for this server or is there a missing command line parameter. Here is my complete bkupexec.fax file. Hope someone can find out where my problem relies. Thanks in advance.


**** Start of BEDIAG results ****

Fileserver Name: X4

BEDIAG.NLM v9.10 07/29/2005 - Backup Exec Diagnostic Utility Module
NetWare 5.60.05 May 27, 2004

<#Serial_Numbers>

Server Serial: 570-999-003531 Site License




Wed Nov 2 13:32:01 2005
Time zone name: EST

<#Dos_Boot_Files>

* \CONFIG.SYS *
Files=40
Buffers=50
country=001,437,c:\dos\country.sys
device=c:\cpqidecd.sys /D:CPQCDROM
device=c:\dos\display.sys con=(EGA,,1)
Lastdrive=z

********************************

* \AUTOEXEC.BAT *
@echo off
prompt $p$g
path=c:\dos
mscdex /d:cpqcdrom /v /m:50 /l:f
c:\dos\nlsfunc
c:\dos\mode con cp PREPARE=((437) c:\dos\EGA.cpi)
c:\dos\mode con cp Select=437
cd \NWSERVER
server

********************************


Total Server Memory is 1048165 Kilobytes
Total Server Memory free is 823068 Kilobytes
********************************

<#NetWare_Boot_Files>

* STARTUP.NCF *
LOAD CPQRAID.HAM SLOT=10015 lun_enable=ff
LOAD CPQSHD.CDM
LOAD NWASPI.CDM
LOAD IDECD.CDM
LOAD IDEATA.HAM PORT=1F0 INT=E
LOAD CPQACA.NLM
LOAD CPQACPI.PSM
LOAD CPQACMGR.NLM

SET MINIMUM PACKET RECEIVE BUFFERS = 1000
set reserved buffers below 16 meg = 300
SET MAXIMUM CONCURRENT DISK CACHE WRITES = 500
SET DIRTY DISK CACHE DELAY TIME = 0.5 SEC
SET DAYS UNTOUCHED BY COMPRESSION = 30
SET MAXIMUM SERVICE PROCESSES = 1000
SET NEW SERVICE PROCESS WAIT TIME = 0.3 SEC
SET MAXIMUM RECEIVE BUFFERS = 4000
SET MAXIMUM DIRECTORY CACHE BUFFERS = 4000
SET DIRECTORY CACHE ALLOCATION WAIT TIME = 0.5
SET MINIMUM DIRECTORY CACHE BUFFERS = 2000
SET DIRTY DIRECTORY CACHE DELAY TIME = 0.5 SEC
SET DIRTY CACHE ALLOCATION WAIT TIME = 0.5 SEC
SET DIRECTORY CACHE BUFFERS NON REFERENCED DELAY = 5 MIN


********************************

<#SCSI_Info>


CMD Host = BECDM.CDM
Number of Host Adapters = 1

Host Adapter 0 CPQRAID.HAM Compaq Unified R
SCSI ID = 0 Lun = 1 COMPAQ LOGICAL VOLUME (2.36),
SCSI ID = 1 Lun = 0 COMPAQ TSL-9000 (2.05), * - Primary
SCSI ID = 1 Lun = 0 COMPAQ 12/24GB DAT 8 AL (2.05), * - Secondary


********************************

<#NetWare_Boot_Files>

* SYS:SYSTEM\AUTOEXEC.NCF *
set Time Zone = EST5EDT
set Daylight Savings Time Offset = 1:00:00
set Start Of Daylight Savings Time = (APRIL SUNDAY FIRST 2:00:00 AM)
set End Of Daylight Savings Time = (OCTOBER SUNDAY LAST 2:00:00 AM)
set Default Time Server Type = Secondary
# Note: The Time zone information mentioned above
# should always precede the SERVER name.

SEARCH ADD SYS:\JAVA\BIN
SEARCH ADD SYS:\JAVA\NWGFX
SEARCH ADD SYS:\JAVA\NJCLV2\BIN

# WARNING!!

FILE SERVER NAME X4

# WARNING!!
# If you change the name of this server, you must update
# all the licenses that are assigned to this server. Using
# NWAdmin, double-click on a license object and click on
# the Assignments button. If the old name of
# this server appears, you must delete it and then add the
# new server name. Do this for all license objects.

load conlog maximum=100

; Network driver LOADs and BINDs are initiated via
; INITSYS.NCF. The actual LOAD and BIND commands
; are contained in INITSYS.NCF and NETINFO.CFG.
; These files are in SYS:ETC.

sys:etc\initsys.ncf

LOAD ODINEB.NLM

#LOAD TCPIP
#LOAD Q57.LAN SLOT=10016 FRAME=ETHERNET_II NAME=Q57_1_EII
#BIND IP Q57_1_EII addr=128.128.13.200 mask=255.255.255.0 gate=128.128.13.1
MOUNT ALL

rem SYS:\SYSTEM\NMA\NMA5.NCF
rem BSTART.NCF
rem LOAD PORTAL.NLM
rem LOAD NDSIMON.NLM

; This will load the HotPlug User Interface Module
; LOAD SYS:\SYSTEM\NCMCON.NLM

rem LOAD NICISDI.XLM s
rem LOAD SASDFM.XLM
rem LOAD SAS.NLM
LOAD PKI.NLM
rem LOAD NLDAP.NLM

# Storage Management Services components required for Backup
SMSSTART.NCF
SEARCH ADD SYS:\TOMCAT\33\BIN

rem TOMCAT33
#Apache is now the NetWare Web Manager server

rem SEARCH ADD SYS:\APACHE
rem NVXADMUP
rem LOAD CPQHLTH
rem LOAD CPQCI
rem LOAD CPQONLIN
rem LOAD CPQIML
rem LOAD CPQSBD.NLM

rem CPQSNMP

load SURVEY -w10 -cWed.12,7
#RCONAG6.NLM is required by RConsoleJ
#LOAD RCONAG6 2034 16800 2036
UCS.NCF
STARTX

Load AFREECON.NLM



<#NetWare_CFG_Files>

* SYS:SYSTEM\TIMESYNC.CFG *
# TimeSync.Cfg is now updated automatically,
# when changes are made on the System Console

# TIMESYNC Configuration Parameters

Configured Sources =OFF
Polling Count =3
Polling Interval =600
Service Advertising =ON
Synchronization Radius =2000
Type =SECONDARY
NTP Client Port =0

# TIMESYNC Configured time source list


* SYS:ETC\NETINFO.CFG *
#!VERSION=2.3
#!
#! --- WARNING -- WARNING -- WARNING -- WARNING -- WARNING -- WARNING ----
#! This file was created by the Internetworking Configuration Console.
#! It is intended to be modified ONLY by the configurator (INETCFG.NLM).
#! Tampering with this file may cause severe malfunctioning of the system.
#! The configurator will check for tampering and abort if it is detected.
#! -----------------------------------------------------------------------
#!
#!SERVERTYPE=NORMAL
#!
#!UIMODE=NORMAL
#!
#!BEGINGENLOAD
LOAD SNMP
LOAD BCALLSRV
#!END
#!
#!BEGINTSMLOAD
#!END
#!
#!BEGINBOARD DRVR=Q57 NAME=Q57_1_EII STATUS=ENABLED NUMPORTS=1 DRVRTYPE=LAN VARIABLEPORTS=NO PORTPARAM=CHANNEL SLOT=10016
#Transferred from AUTOEXEC.NCF
#!BEGINPORT NAME=Q57_1_EII NUMBER=1 STATUS=ENABLED FRAMES=YES NUMLINKS=1 MEDIA=EtherTsm WANFRAME=UNCONFIGURED
#Transferred from AUTOEXEC.NCF
#!REFCOUNT=1
LOAD Q57 NAME=Q57_1_EII_EII FRAME=ETHERNET_II SLOT=10016
#!END
#!END
#!
#!BEGINPROTO PROTO=TCPIP STATUS=ENABLED
LOAD TCPIP
#Transferred from AUTOEXEC.NCF
#!BEGINBIND STATUS=ENABLED
BIND IP Q57_1_EII_EII ARP=Yes Mask=255.255.255.0 Address=128.128.13.6
#128.128.13.6
#!END
#!END

* SYS:ETC\SMS\SMDR.CFG *
#This is SMDR default configuration file.
#Lines with a # in first column are treated as Comments.

#Following is a list of all the configuration parameters.
#Default & Possible values of parameters are also listed.

#Parameter name is case sensitive, but their values not.
#':' should immediately follow the name of the parameter.
#Even whitechars can't occur between parameter name & :



#SLP: default is enabled
#SAP: default is enabled
#HOSTS: default is enabled
#PROTOCOL:
# Both Protocol Stacks are enabled by default

#IP: default is first bound primary IP
#ALTIP: additional IP addresses bound to the system

SLP: Enable

#SAP is disabled, server will not advertise & listen SAP Packets
SAP: Disable

#No discovery is supported through Hosts/DNS lookup
HOSTS: Enable

#Only TCP/IP protocol is enabled

PROTOCOL: TCPIP

#SMDR will listen at default bound IP address



<#BENW_Files>

* SYS:SYSTEM\BESTART.NCF *
SEARCH ADD SYS:\BKUPEXEC\NLMS
LOAD SYS:\BKUPEXEC\NLMS\BKUPEXEC.NLM -bC:\NWSERVER -tr %1 %2
* SYS:BKUPEXEC\NLMS\BESTARTJ.NCF *
LOAD JAVA

envset BE_NW_JAVA=SYS:\BKUPEXEC\JAVA\SERVER

envset CLASSPATH=sys:\java\lib\rt.jar;sys:\java\bin\i18n.jar;sys:\java\classes;.
envset CLASSPATH=$CLASSPATH;SYS:\JAVA\lib\swing.jar
envset CLASSPATH=$CLASSPATH;$BE_NW_JAVA\jndi.jar
envset CLASSPATH=$CLASSPATH;$BE_NW_JAVA\njclv2.jar
envset CLASSPATH=$CLASSPATH;$BE_NW_JAVA\NWDir.jar
envset CLASSPATH=$CLASSPATH;$BE_NW_JAVA\NWSess.jar
envset CLASSPATH=$CLASSPATH;$BE_NW_JAVA\NWPrtQAdm.jar
envset CLASSPATH=$CLASSPATH;$BE_NW_JAVA\NWSockets.jar
envset CLASSPATH=$CLASSPATH;$BE_NW_JAVA\NWBind.jar
envset CLASSPATH=$CLASSPATH;$BE_NW_JAVA\NWVolAdm.jar
envset CLASSPATH=$CLASSPATH;$BE_NW_JAVA\netServer.jar
envset CLASSPATH=$CLASSPATH;$BE_NW_JAVA\Message.jar
envset CLASSPATH=$CLASSPATH;$BE_NW_JAVA\configuration.jar
envset CLASSPATH=$CLASSPATH;$BE_NW_JAVA\common.jar
envset CLASSPATH=$CLASSPATH;$BE_NW_JAVA\benw.jar
envset CLASSPATH=$CLASSPATH;$BE_NW_JAVA\jhall.jar
envset CLASSPATH=$CLASSPATH;$BE_NW_JAVA\BENWHelp.jar

JAVA -nsac -sn"Backup Exec Java Application Server" -Djava.security.policy=SYS:\BKUPEXEC\java\server\bkupexec.policy vrts.hro.net.rmi.server.ServerMain -P 10002 -Language eng -Path SYS:\BKUPEXEC\LOG\

* SYS:SYSTEM\BESTOP.NCF *
LOAD SYS:\BKUPEXEC\NLMS\BESTOP.NLM %1 %2

* SYS:BKUPEXEC\BKUPEXEC.FAX *
#-------------------------------------------------------------------------------
# Backup Exec SureStart
#
# X4\SYS:\BKUPEXEC\BKUPEXEC.FAX
#
# Wed Nov 02 11:25:21 2005
#-------------------------------------------------------------------------------

Beginning the initialization procedure
Current system parameters are as follows
LoadType: Remote Agent
API mode: Directory Services
Driver: Not specified
DMA mode: Use memory below 16 megabyte boundary
Driver mode: Asynchronous
ASPI Manager: Using BECDM.CDM
Driver bus mode: Physical Bus
Autoload Novell TSAs: 1
Autoload B2D: 1
Validate NLM Versions: 1
Validate memory: 1
Debug: On: 0 ZL: 0
Internal: RA: 0 RQ: 0 MC: 0 UB: 0 LE: 0
Initializing internal control parameters
Initializing secondary control parameters
Couldn't retrieve the previous products history path from upgrade.cfg, setting it to default

Initializing system operating paths
Initializing NOS Links
Initializing Load Subsystem
Initialization complete
Validating system environment
Validating system memory resources
Cache boundaries are 65%High - 40%Medium - 20%Low
78% of the cache buffers on the server are currently available.
System environment validation has completed
-------------------------------------------------------------------------------
CHECKING SERVER FILES which may need to be updated.
Checking module NCSSDK.NLM for possible update.
Version on server is OK.

Done checking server files which may need to be updated.
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Checking for cluster services.
Cluster services not available.
-------------------------------------------------------------------------------
Loading dependent modules
Module TLI.NLM is already loaded
Module DSAPI.NLM is already loaded
Loading module NETDB.NLM
Module SMDR.NLM is already loaded
Module TSAFS.NLM is already loaded
Loading module TSANDS.NLM
Loading module NDMPD.NLM

* SYS:BKUPEXEC\BESTOP.FAX *
#-------------------------------------------------------------------------------
# Backup Exec Unloader
#
# SYS:\BKUPEXEC\BESTOP.FAX
#
# Wed Nov 02 10:37:48 2005
#-------------------------------------------------------------------------------

Beginning the initialization procedure.
Initializing Unload Subsystem.
Reading in commands from SYS:\BKUPEXEC\BESTOP.CFG.
Initialization complete.

Processing commands...

Module BECLIENT.NLM is not loaded.
Unloading module: ECM.NCF
Module BEEXVIEW.NLM is not loaded.
Module BEENABLE.NLM is not loaded.
Module NMPBKMON.NLM is not loaded.
Module BESRVR.NLM is not loaded.
Module BEPSVR.NLM is not loaded.
Unloading module: NDMPD.NLM
Module BEOPRD.NLM is not loaded.
Module BEORANW.NLM is not loaded.
Module BEEARP.NLM is not loaded.
Module BEDEBUG.NLM is not loaded.
Unloading module: AD_ASPI.NLM
Module B2D.NLM is not loaded.
Unloading module: NRLTLI.NLM
Unloading module: BKUPEXEC.NLM
Module OFM.NLM is not loaded.
Unload completed successfully.

* SYS:BKUPEXEC\VERSION.DOC *
-----------------------------------------------------

Backup Exec for NetWare 9.1 Build 1158.4

Media Server = 1158.4
Ndmp Server = 1158.4
Nlm Client = 1158.4
Java Client = 1158.4
Drivers = 0011N022

Windows 9X agent = 5.030
MAC OS X agent = 5.045
UNIX agent = 5.046

OFO NW option = 9.4.401k
RAWS/OFO NT option = 4691R.42

-----------------------------------------------------

* SYS:BKUPEXEC\BESTOP.CFG *
#
# Backup Exec - Unloader
#
# BESTOP.CFG
#
#==============================
# Format: Type Command
# NOTE: Command must contain complete file name.
#
# Command types:
# UNLOAD SOME.NLM = 1
# Run a NCF file = 2
# Console command = 3
#
#==============================
# Examples:
# 1 MONITOR.NLM
# 2 AUTOEXEC.NCF
# 3 LIST DEVICES
#
#==============================
#
#type command
1 BECLIENT.NLM
2 ECM.NCF
1 BEEXVIEW.NLM
1 BEENABLE.NLM
1 NMPBKMON.NLM
1 BESRVR.NLM
1 BEPSVR.NLM
1 NDMPD.NLM
1 BEOPRD.NLM
1 BEORANW.NLM
1 BEEARP.NLM
1 BEDEBUG.NLM
1 AD_ASPI.NLM
1 B2D.NLM
1 NRLTLI.NLM
1 BKUPEXEC.NLM
1 OFM.NLM


* SYS:BKUPEXEC\BESRVR.CFG *
Media_management_mode = 0
Media_management_path = X4\SYS:\BKUPEXEC\MM\
Path_for_catalog_files = X4\SYS:\BKUPEXEC\CATALOGS\
Path_for_history_logs = X4\SYS:\BKUPEXEC\LOG\
Path_for_BERoot = X4\SYS:\BKUPEXEC\
Path_for_workstation_files = X4\SYS:\BKUPEXEC\AGENTS\
Job_policy_data_path = X4\SYS:\BKUPEXEC\JOBDATA\
Report_data_path = X4\SYS:\BKUPEXEC\REPORTS\
Path_for_online_documentation = X4\SYS:\BKUPEXEC\DOCS\

* SYS:BKUPEXEC\NDMPSVRS.DAT *
#This is the Backup Exec default file listing NDMP servers for Backup.
#Lines with a # in first column are treated as comments.
#
#Sample
#REMOTE_SRVR 10.51.86.70 1122223333444444

* SYS:BKUPEXEC\TILDBG.TXT *

Server Name Is: X4
Todays Date Is: Wed Nov 2 11:25:27 2005


------------------ Devices In Host Bus Adapter Order ------------------------

Drive ( 00,01,00 ) COMPAQ TSL-9000 2.05


------------------ Devices In Application Order ----------------------------

Drive ( 00,01,00 ) COMPAQ 12/24GB DAT 8 AL 2.05 COMDAT.NLM


------------------ Serial Numbers -------------------------------------------

Drive ( 00,01,00 ) Serial Number = 0022003692



<#OFO_CFG_Files>



<#DCDiag>

* SYS:BKUPEXEC\DCDIAG.FAX *

------------------------------------------------------------------
--------------------------- DRIVE.DAT ----------------------------
------------------------------------------------------------------


------------------------------------------------------------------
-------------------------- DRVPOOL.DAT ---------------------------
------------------------------------------------------------------

------------------------------------------------------------------
-------------------------- DRVPLD.DAT ----------------------------
------------------------------------------------------------------

------------------------------------------------------------------
--------------------------- MEDIA.DAT ----------------------------
------------------------------------------------------------------

------------------------------------------------------------------
------------------------- MEDIASET.DAT ---------------------------
------------------------------------------------------------------

------------------------------------------------------------------
--------------------------- PART.DAT -----------------------------
------------------------------------------------------------------

------------------------------------------------------------------
------------------------- PARTDRV.DAT ----------------------------
------------------------------------------------------------------

------------------------------------------------------------------
-------------------------- PORTAL.DAT ----------------------------
------------------------------------------------------------------

------------------------------------------------------------------
--------------------------- ROBOT.DAT ----------------------------
------------------------------------------------------------------

------------------------------------------------------------------
--------------------------- SLOT.DAT -----------------------------
------------------------------------------------------------------

------------------------------------------------------------------
--------------------------- MEDIALBL.DAT -------------------------
------------------------------------------------------------------



<#SCSIVIEW>

* SYS:BKUPEXEC\SCSIVIEW.SCV *



<#CDBSREAD>

* SYS:BKUPEXEC\CDBSREAD.CDB *





********************** Cluster related information

No Cluster Services available.
********************** NLMs currently loaded in memory

<#Loaded_NLMs>

NSPSLP.NLM v6.20b 09/08/03 NetWare Winsock 2.0 NSPSLP.NLM Name Service Provider
CDBE.NLM v6.00 05/10/04 NetWare Configuration DB Engine
NWKCFG.NLM v2.16 09/02/03 NetWare Kernel Config NLM
PVER500.NLM v3.00 02/27/03 NetWare 6.XX Version Library
AIOPS2.NLM v1.00 08/14/01 PS/2 Mouse Port Driver
CPUCHECK.NLM v5.60a 05/07/03 NetWare Processor Checking Utility
DIAG500.NLM v3.00 05/11/04 Diagnostic/coredump utility for NetWare 5.x/6.x
NEB.NLM v5.61 12/11/02 Novell Event Bus
NBI.NLM v2.35p 06/09/04 NetWare Bus Interface
SGUID.NLM v5.61 03/04/03 NetWare 5 GUID Services
MM.NLM v3.03 05/17/04 NetWare 6 Media Manager
NWPA.NLM v3.12h 05/06/04 NetWare 6 NetWare Peripheral Architecture NLM
NWPALOAD.NLM v3.00 07/10/00 NetWare 5 NWPA Load Utility
CPQSHD.CDM v1.59 05/28/03 Compaq NWPA SCSI Disk Driver
CPQRAID.HAM v2.08 06/02/03 Compaq Unified RAID driver
CPQASL.NLM v1.06 05/12/03 hp ProLiant Architecture Services Library (ASL) for NetWare 6.x
CPQACA.NLM v1.06 05/12/03 hp ProLiant ACPI Component Architecture (ACA) for NetWare 6.x
CPQACMGR.NLM v1.06 05/12/03 hp ProLiant ACPI Component Driver Manager for NetWare 6.x
IDECD.CDM v3.00 08/15/01 Novell ATAPI CD-ROM/DVD-ROM Custom Device Module
CPQACPWR.NLM v1.06 05/12/03 hp ProLiant ACPI Component Driver for Power Management for NetWare 6.x
IDEATA.HAM v3.11 09/01/01 Novell ATA/IDE/ATAPI Host Adapter Module
LIBC.NLM v7.05 06/23/04 Standard C Runtime Library for NLMs
USBSHIM.NLM v1.01 09/11/02 Novell USB Platform Shim
USBIO.NLM v1.01a 04/05/02 Novell USB IO System
OHCIDRV.NLM v1.01e 06/24/03 Novell Universal Serial Bus OHCI Driver
LSL.NLM v4.81 05/07/04 Novell NetWare Link Support Layer
UKBDSHIM.NLM v1.00 03/27/02 Novell USB Keyboard Shim
CONNMGR.NLM v5.60 06/16/04 NetWare Connection Manager NLM
UMSSHIM.NLM v1.01 12/17/01 Novell USB Mouse Shim
LFS.NLM v5.12 01/23/04 NetWare Logical File System NLM
FILESYS.NLM v5.13 04/02/04 NetWare File System NLM
UNICODE.NLM v7.00 06/03/04 NetWare Unicode Runtime Library (UniLib-based)
LOCNLM32.NLM v6.00 06/03/04 NetWare NWLocale Runtime Library
NSSWIN.NLM v3.05 05/10/04 NSS ASCI Window API Library (Build 189 MP)
LIBNSS.NLM v3.05 05/10/04 Generic Library used by NSS (Build 95 MP)
NSS.NLM v3.05 05/10/04 NSS (Novell Storage Services) (Build 666 MP)
COMN.NSS v3.05 05/19/04 NSS Common Support Layer (COMN) (Build 2350 MP)
MANAGE.NSS v3.05 05/19/04 NSS Management Functions (Build 265 MP)
MAL.NSS v3.05 05/19/04 NSS Media Access Layer (MAL) (Build 458 MP)
ZLSS.NSS v3.05 05/19/04 NSS Journaled Storage System (ZLSS) (Build 1485 MP)
NWSA.NSS v3.05 05/19/04 NSS NetWare Semantic Agent (NWSA) (Build 1074 MP)
VOLMN.NSS v3.05 05/19/04 NSS Distributed Volume Manager (Build 184 MP)
PARTAPI.NLM v1.21 03/17/00 Partition APIs
NSSIDK.NSS v3.05 05/19/04 NSS Pool Configuration Manager (Build 242 MP)
MALHLP.NLM v3.05 05/10/04 NSS Configure help messages (Build 340 MP)
QUEUE.NLM v5.60 03/19/02 NetWare Queue Services NLM
NCP.NLM v5.60 02/26/04 NetWare Core Protocol (NCP) Engine
WS2_32.NLM v6.21f 06/15/04 NetWare Winsock 2.0 NLM
XIM.XLM v26410.05 11/10/03 Novell NICI Signed Loader
XSUP.NLM v26410.05 11/10/03 NICI XSUP from Novell, Inc.
XMGR.NLM v26410.05 11/10/03 NICI XMGR from Novell, Inc.
XENGNUL.NLM v26410.05 11/10/03 NICI NULL XENG from Novell, Inc.
XENGEXP.NLM v26410.05 11/10/03 NICI Import Restricted XENG from Novell, Inc.
XNGAUSC.NLM v26410.05 11/10/03 NICI U.S./Worldwide XMGR Assistant XENG from Novell, Inc.
XENGUSC.NLM v26410.05 11/10/03 NICI U.S./Worldwide XENG from Novell, Inc.
DSLOADER.NLM v10330.03 08/11/02 Novell Directory Services Version 8.6.2 Loader
CCS.NLM v26410.05 11/10/03 Controlled Cryptography Services from Novell, Inc.
SLP.NLM v2.09 04/15/04 SERVICE LOCATION PROTOCOL (RFC2165/RFC2608)
PMLODR.NLM v1.20 01/23/03 PMLodr for NW6
MASV.NLM v1.37a 12/12/01 Mandatory Access Control Service
LIB0.NLM v5.90j 02/24/04 Novell Ring 0 Library for NLMs
THREADS.NLM v5.90j 02/24/04 Novell Threads Package for NLMs
REQUESTR.NLM v5.90j 02/24/04 Novell NCP Requestor for NLMs
STREAMS.NLM v6.00c 01/18/02 NetWare STREAMS PTF
NLMLIB.NLM v5.90j 02/24/04 Novell NLM Runtime Library
NIT.NLM v5.90j 02/24/04 NetWare Interface Tools Library for NLMs
CLIB.NLM v5.90j 02/24/04 (Legacy) Standard C Runtime Library for NLMs
CLNNLM32.NLM v6.00 06/03/04 NetWare NWClient Runtime Library
NCPNLM32.NLM v6.00 06/03/04 NetWare NWNCP Runtime Library
NETNLM32.NLM v5.05i 10/28/03 NetWare NWNet Runtime Library
DSEVENT.NLM v5.05i 10/28/03 NetWare DSEvent Runtime Library
DSAPI.NLM v5.05i 10/28/03 NetWare NWNet Runtime Library
CLXNLM32.NLM v6.00 06/03/04 NetWare NWCLX Runtime Library
TIMESYNC.NLM v6.04h 05/19/04 NetWare Time Synchronization Services
POLIMGR.NLM v6.22 02/27/04 NetWare License Policy Manager
NDSAUDIT.NLM v2.09 05/22/03 Directory Services Audit
SAL.NLM v10210.65 02/21/03 Novell System Abstraction Layer Version 2.1.0
ROLLCALL.NLM v5.00 07/27/98 RollCall NLM (101, API 1.0)
DS.NLM v10350.30 12/15/03 Novell eDirectory Version 8.6.2 SMP
CONLOG.NLM v3.00b 11/26/02 System Console Logger
CALNLM32.NLM v6.00 06/03/04 NetWare NWCalls Runtime Library
NSPNDS.NLM v6.20 11/12/01 NetWare Winsock 2.0 NSPNDS.NLM Name Service Provider
TLI.NLM v4.30b 12/19/00 NetWare Transport Level Interface Library
SNMP.NLM v4.17 01/23/04 Netware 4.x/5.x/6.x SNMP Service
NWUCMGR.NLM v1.05 03/14/01 NWUCMGR.NLM v1.5 Build 230
PSVCS.NLM v230.00 02/24/01 Portability Services
NWAIF103.NLM v7.90 08/08/01 nwaif103.nlm v7.90, Build 245 ()
NWENC103.NLM v7.90 02/24/01 NWENC103.NLM v7.90.000 (Text Encoding Conversion Library)
NWMKDE.NLM v7.90 03/21/01 NWMKDE.NLM v7.90.230.000
BTRIEVE.NLM v7.90 03/21/01 BTRIEVE.NLM v7.90.000
CSL.NLM v2.06b 01/13/00 NetWare Call Support Layer For NetWare
MSM.NLM v4.10 01/24/03 Novell Multi-Processor Media Support Module
NLSLSP.NLM v5.02 03/16/04 NLS - License Service Provider
NLSMETER.NLM v3.41 02/19/04 NLS - Software Usage Metering Database
CONNAUD.NLM v3.15 05/12/04 NLS - Connection Metering
ETHERTSM.NLM v3.89 01/27/03 Novell Ethernet Topology Specific Module
Q57.LAN v6.01 02/14/03 HP NC77xx/NC67xx Gigabit Server Adapter
NLSAPI.NLM v5.02 08/07/03 NLSAPI
LSAPI.NLM v5.02 01/07/03 NLS LSAPI Library
CSLIND.NLM v4.21 12/07/99 TCPIP CSL INDEPENDENCE MODULE 7Dec99 7Dec99
NETLIB.NLM v6.03a 10/07/02 Novell TCPIP NETLIB Module CSP9_Rel
TCP.NLM v6.10b 03/23/04 Novell TCP/IP Stack - Transport module (NULL encryption)
TCPIP.NLM v6.10f 06/02/04 Novell TCP/IP Stack - Network module (NULL encryption)
BSDSOCK.NLM v6.10d 06/18/04 Novell BSDSOCK Module
GAMS.NLM v1.13a 06/21/02 Graded Authentication Management Service
NCPIP.NLM v5.64 05/11/04 NetWare NCP Services over IP
WSPIP.NLM v6.21d 06/04/04 NetWare Winsock Service 1.0 NLM for TCP and UDP
SLPTCP.NLM v2.09 04/15/04 SERVICE LOCATION TCP/UDP INTERFACE (RFC2165/RFC2608)
NSPDNS.NLM v6.20c 09/08/03 NetWare Winsock 2.0 NSPDNS.NLM Name Service Providers
SPMNWCC.NLM v1.01 12/03/03 Novell SPM Client for NWCC
NMAS.NLM v2.65 12/03/03 Novell Modular Authentication Service
ODINEB.NLM v1.10 08/13/99 Novell ODI to Novell Event Bus Interface Module
LDAPSDK.NLM v3.01 11/13/03 LDAP SDK Library (Clib version)
PKI.NLM v2.70a 12/03/03 Novell Certificate Server
SMDR.NLM v6.54a 06/11/04 SMS - Storage Data Requestor
TSAFS.NLM v6.50i 06/07/04 SMS - File System Agent for NetWare 6.X
NWIDK.NLM v3.01a 09/19/03 CDWare Volume Module
SURVEY.NLM v2.54 06/12/03 Compaq Survey Utility for NetWare
JSOCK.NLM v1.30e 09/07/01 Support For Java Sockets
JAVA.NLM v1.30 09/07/01 Novell JVM Version 1.3.0_02 Build 01090717
JVM.NLM v1.30 09/07/01 Java jvm (based on 1.3)
JSOCK6X.NLM v1.30e 09/07/01 NetWare 6.x Support For Java Sockets
FPSM.NLM v5.90a 12/12/00 Novell Floating-Point Support Module for NLMs
XLIB.NLM v11.06a 08/14/01 X11R6.1 Library
MATHLIB.NLM v4.21 10/14/99 NetWare Math Library Auto-Load Stub
AIO.NLM v7.00g 11/17/03 NetWare Asynchronous I/O Library
XIDEV.NLM v1.00 09/05/01 XWindows Input Driver
XINIT.NLM v6.00 08/14/01 XInit
SURVEYCW.NLM v1.00 10/10/00 SurveyCW.nlm
AFREECON.NLM v5.00 07/22/05 AdRem Free Remote Console (NCPE)
HWDETECT.NLM v1.18g 06/24/03 Novell Hardware Insertion/Removal Detection
NLSADAPT.NLM v1.02 11/15/01 NLSAPI Remote Adapter for NetConsole
NLSADPT2.NLM v2.00 09/09/03 NLS and Metering adapter for iManager 2.0 plugin
XFSVGA.NLM v3.12 08/23/01 XFree86 - X11R6 Server
VERIFY.NLM v1.30 09/07/01 Java verify (based on 1.3)
JVMLIB.NLM v1.30 09/07/01 Java jvmlib (based on 1.3)
ZIP.NLM v1.30 09/07/01 Java zip (based on 1.3)
NLSTRAP.NLM v5.02 02/19/04 NetWare License Server Trap
SYMCJIT.NLM v3.10u 08/15/01 Symantec Java JIT for Netware Java 1.3.x
MLIB.NLM v2.00a 08/14/01 MLIB - Java 1.3 Media Library
NAWT.NLM v1.00a 08/31/01 NAWT - 1.1 Graphics
NWBG.NLM v1.00 08/14/01 NWBackground
FONTMN.NLM v2.00a 08/14/01 FONTMN - Java 1.2 Font Manager
DFSLIB.NLM v3.05 05/19/04 DFS Common Library (Build 281 MP)
JSMSG.NLM v3.05 05/19/04 Jetstream Message Layer (Build 376 MP)
JSTCP.NLM v3.05 05/19/04 Jetstream TCP Transport Layer (Build 368 MP)
ICELIB.NLM v1.01 09/05/01 IceWM Dynamic Library - 1.1 for Netware
ICEWM.NLM v1.01 08/14/01 IceWM - 1.1 for Netware
BKUPEXEC.NLM v9.10 07/29/05 Backup Exec SureStart
NETDB.NLM v4.10z 06/27/03 Network Database Access Module
TSANDS.NLM v10551.61 12/02/03 TSA for Novell eDirectory 7.x, 8.x
NRLTLI.NLM v9.10 07/29/05 Backup Exec - Remote Workstation Backup Software
AD_ASPI.NLM v7.50 08/10/05 Backup Exec ASPI Device Driver for NetWare
NDMPD.NLM v9.10 08/04/05 VERITAS Backup Exec NDMP Server Module
BECDM.CDM v7.50 06/21/05 Symantec Basic Translator CDM
COMDAT.NLM v7.50 07/26/05 Backup Exec - Common DAT Target Handler
TNRLSPX.NLM v9.10 07/29/05 Backup Exec - Peer SPX Support
TNRLTCP.NLM v9.10 07/29/05 Backup Exec - Peer TCP Support
NWI.NLM v2.50d 09/19/03 NetWare Install (NWI) Module
TOOLBOX.NLM v1.09d 08/20/98 toolbox.nlm
BEDIAG.NLM v9.10 07/29/05 Backup Exec Diagnostic Utility Module



********************** Backup Exec NLMs found on disk

<#BENW_NLMs>

ACL452.NLM v7.50 11/07/02 Backup Exec - Odetics ACL 4/52 Loader Target Handler
AD_ASPI.NLM v7.50 08/10/05 Backup Exec ASPI Device Driver for NetWare
ADDTAPE.NLM v7.50 08/10/05 Backup Exec Add Tape Device Driver
ADIC448.NLM v7.50 02/13/03 Backup Exec - ADIC Scalar 448 Loader Target Handler
ADIC8VLS.NLM v7.50 08/10/01 Backup Exec - ADIC 8mm Loader Target Handler
ADICDAT.NLM v7.50 08/10/01 Backup Exec - ADIC DAT Loader Target Handler
AITLDR.NLM v7.50 07/05/05 Backup Exec - AIT Loader Target Handler
AIWAD210.NLM v7.50 08/10/01 Backup Exec - Aiwa DAT Loader Target Handler
ARCH150.NLM v7.50 08/10/01 Backup Exec - Conner 150/250 Target Handler
ARCH2750.NLM v7.50 08/10/01 Backup Exec - Conner 2750 Target Handler
ARCH525.NLM v7.50 08/10/01 Backup Exec - Conner 525 Target Handler
ARDATLDR.NLM v7.50 10/25/04 Backup Exec - Seagate DAT Loader Target Handler
B2D.NLM v7.50 08/10/05 Symantec Backup To Disk Device Driver
BE.NLM v9.10 07/29/05 Backup Exec - Administration Console Starter
BECLIENT.NLM v9.10 07/29/05 Backup Exec - Administration Console
BEDBCOMP.NLM v9.10 07/29/05 Backup Exec Database Compact Utility
BEDEBUG.NLM v9.10 07/29/05 Backup Exec Debug Extensions
BEDIAG.NLM v9.10 07/29/05 Backup Exec Diagnostic Utility Module
BEENABLE.NLM v9.10 07/29/05 Backup Exec Update Manager
BEEXVIEW.NLM v9.10 07/29/05 Backup Exec - ExecView
BEGATHER.NLM v9.10 07/29/05 Backup Exec BEGather Utility
BEGDM.NLM v9.10 07/29/05 Backup Exec/GDM Integration Module
BEPSVR.NLM v9.10 07/29/05 Backup Exec - NCPE Server
BESFT3.NLM v9.10 07/29/05 Backup Exec SFT3 MSEngine Shim
BESRVR.NLM v9.10 08/17/05 Backup Exec - Job Server
BESTOP.NLM v9.10 07/29/05 Backup Exec Unloader
BEUPGRAD.NLM v9.10 07/29/05 Backup Exec Upgrade Utility
BEXTSKMA.NLM v9.10 07/29/05 Backup Exec - NDS Schema Extension Utility
BHILLQ7.NLM v7.50 08/10/01 Backup Exec - Breece Hills Q7 Loader Target Handler
BKUPEXEC.NLM v9.10 07/29/05 Backup Exec SureStart
COMDAT.NLM v7.50 07/26/05 Backup Exec - Common DAT Target Handler
CPHRL7A.NLM v7.50 07/27/05 Backup Exec - DLT Loader Target Handler
CPHRT860.NLM v7.50 05/16/02 Backup Exec - DLT Target Handler
DCDIAG.NLM v9.10 07/29/05 Backup Exec MM DB Dump Utility
DLTVLS.NLM v7.50 08/10/01 Backup Exec - ADIC 300/400 VLS DLT Loader Target Handler
EXB18LDR.NLM v7.50 09/10/01 Backup Exec - Exabyte Loader Target Handler
EXB8500.NLM v7.50 06/10/04 Backup Exec - Exabyte 8mm SCSI-2 Target Handler
EXB_10I.NLM v7.50 11/17/04 Backup Exec - Exabyte 8mm Loader Target Handler
EXB_218.NLM v7.50 08/10/01 Backup Exec - Exabyte 218 Target Handler
EXBSX.NLM v7.50 08/10/01 Backup Exec - Exabyte 8200SX Target Handler
EXECVIEW.NLM v9.10 07/29/05 Backup Exec - ExecView Support Starter
HPDLTLDR.NLM v7.50 11/08/04 Backup Exec - HP DLT Library Target Handler
HPLOADER.NLM v7.50 12/13/01 Backup Exec - HP DAT Loader Target Handler
LAGO340.NLM v7.50 08/10/01 Backup Exec - LAGO 340 Loader Target Handler
LAGO380.NLM v7.50 08/10/01 Backup Exec - LAGO 380 Loader Target Handler
LIBRA.NLM v7.50 08/10/01 Backup Exec - Dilog Libra DAT Loader Target Handler
MC3000.NLM v7.50 09/11/02 Backup Exec - SCSI Minicartridge Target Handler
NCSSDK.NLM v1.70 06/03/03 Cluster API Build Number = 06032003
NDMPD.NLM v9.10 08/04/05 VERITAS Backup Exec NDMP Server Module
NMPBKMON.NLM v9.10 07/29/05 Backup Exec - Management Portal
NRLTLI.NLM v9.10 07/29/05 Backup Exec - Remote Workstation Backup Software
OVERLAND.NLM v7.50 11/29/04 Backup Exec - Overland Data Loader Target Handler
READACL.NLM v9.10 07/29/05 Backup Exec NDS ACL Read Utility
SONYLDR.NLM v7.50 04/19/04 Backup Exec - Sony Loader Target Handler
SPEC4000.NLM v7.50 08/10/01 Backup Exec - Spectra Logic 4000 DAT Loader Target Handler
SPEC9000.NLM v7.50 08/10/01 Backup Exec - Spectra Logic 9000 8mm Loader Target Handler
STK9738.NLM v7.50 09/10/01 Backup Exec - StorageTek Target Handler
STORTEK.NLM v7.50 07/18/05 Backup Exec - StorageTek Loader Target Handler
TANDBLDR.NLM v7.50 04/30/03 Backup Exec - Tandberg TDS 1000 Series Target Handler
TANDBQIC.NLM v7.50 03/13/03 Backup Exec - Tandberg QIC Target Handler
TEAC600.NLM v7.50 08/10/01 Backup Exec - TEAC 600 Target Handler
TLS4210.NLM v7.50 04/13/05 Backup Exec - Qualstar Loader Target Handler
TNRLAPT4.NLM v9.10 07/29/05 Backup Exec - Peer ADSP NetWare 4.x Support
TNRLSPX.NLM v9.10 07/29/05 Backup Exec - Peer SPX Support
TNRLTCP.NLM v9.10 07/29/05 Backup Exec - Peer TCP Support
TRAVNLDR.NLM v7.50 08/10/01 Backup Exec - Travan Loader Target Handler
ULTRIUM.NLM v7.50 06/20/03 Backup Exec - Ultrium Target Handler
ULTRMLDR.NLM v7.50 03/17/04 Backup Exec - ultrmldr Target Handler
WANG150.NLM v7.50 08/10/01 Backup Exec - Wangtek 150 Target Handler
WANG5100.NLM v7.50 08/10/01 Backup Exec - Wangtek 51000 Target Handler
WANG525.NLM v7.50 08/10/01 Backup Exec - Wangtek 525 Target Handler
WANG9500.NLM v7.50 08/10/01 Backup Exec - Wangtek 9500 Target Handler



********************************


<#Server_Info>
Server Name: X4
Version: NetWare 5.60.05 May 27, 2004
Connections Supported: 0
Connections In Use: 19
CLIB Version: 5.06.
SFT Level: 2

Block
Mounted Volumes Size Name Spaces Flags Megabytes
---------------- ---- -------------------------- ------------ ---------
SYS 4K DOS MAC NFS LONG NSS 134,999.8
_ADMIN 4K DOS MAC NFS LONG NSS 4.0
SYS1 4K DOS MAC NFS LONG NSS 128,597.6
SYS2 4K DOS MAC NFS LONG NSS 127,970.4

*** Total for all volumes is 391,571.9 megabytes.



********************************

<#Server_Info>
Server Up time is 2:14:10:6
Processor speed is 196759
Number of NLMs loaded is 156
Number of Users Logged in is 19
Number of Name Spaces loaded is 2
********************************
********************************
CPU is CPU TYPE UNKNOWN
Numeric Coprocessor Present
PCI Bus
********************************
Compaq Unified RAID Driver
COMPAQ TSL-900
********************************
Cache Buffers 205767, originally was 261057
Percent of total memory is 78% ( if < 65% add memory )
Cache Hit (System has not run a Cache Check yet)
Dirty Cache Hit (System has not run a Dirty Cache Check yet)
(LRU) Cache unused time: 2:14:10:4
Minimum Number of Cache Buffers is 20
Directory Cache Buffers is 0
Volume used by directories is 13%
********************************
Current Non Cache Memory is 79948112
Current Used Dynamic Memory is 79948112
Total Work Memory is 87613440
Total System Memory is 1073320960
Number of Memory Allocations is 26, 0 failed
********************************
Current pages of memory checked out 175716
NCP Requests 175429, bad requests 0
Packets received with bad connection number 0
Stacks loaded 6
********************************
********************************
LSL Info. Receive Buffer Size 4284
Receive Buffers In 1000, Out 0
********************************
IP Info.
Using gethostbyname(X4).
Local host address 128.128.13.6
Using gethostid().
Local host address: 128.128.13.6
Using IPGetLocalAddr().
Local host address #1: 128.128.13.6


********************************
<#NetWare_Environment>


---- Communications

IPSEC maximum incoming queue length: 0
IPSEC maximum incoming WorkToDos: 0
IP Load Sharing: ON
Tcp 2MSL Timeout: 60
TCP Minshall Algorithm: OFF
TCP Secure ISN: ON
Maximum Pending TCP Connection Requests: 128
BSD Socket default Buffer Size in Bytes: 65536
Tcp Sockets Debug: 0
Discard Oversized Ping Packets: ON
Largest Ping Packet Size: 10240
Tcp IPCP Debug: 0
Tcp WAN Debug: 0
Tcp ICMP Debug: 0
Tcp ECB Debug: 0
Tcp IP Debug: 0
TCP Defend Land Attacks: ON
Maximum Interface MTU: 576
RIP2 aggregation override: OFF
Always Allow IP Fragmentation: OFF
UDP Debug: 0
Tcp RIP Debug: 0
Tcp Arp Debug: OFF
Use Specified MTU: OFF
ip address management override: OFF
Allow IP Address Duplicates: OFF
Allow non local broadcasts: 0
TOS for IP packets: 0
Arp entry update time: 300
Arp entry expiry time: 300
Tcp Ip Maximum Small ECBs: 1024
ICMP Redirect Timeout: 3
Maximum Wait States: 0
Largest UDP Packet Size: 16384
Discard Oversized UDP Packets: ON
TCP UDP Diagnostic Services: OFF
Tcp Maximum Packet Retransmission: 12
TCP Path MTU Black Hole Detection and Recovery: OFF
Tcp Minimum Retransmission Timeout: 2
Tcp Maximum Initial Window: 4
Tcp Connection Establishment timeout: 335
Tcp Trace: 0
TCP Max Port Limit: 54999
Tcp Timer Schedule Rate: 3
TCP Nagle Algorithm: ON
TCP Delayed Acknowledgement: ON
Tcp Number Of Preallocated PCBs: 1024
TCP Sack Option: ON
TCP Large Window Option: ON
Netlib Maximum Small ECBs: 1024
TCPIP Scheduler Inactive: OFF
DISPLAY CSL OPERATIONAL STATUS: OFF
CALL SUPPORT LAYER DEBUG: OFF
Connection Table Expansion Count: 16
Dead Connection Timeout: 4:9
Enable Connection Manager Screen: OFF
Maximum Connection Object Reuse Count: 32
Disable Broadcast Notifications Process: OFF
Disable Watchdog Process: OFF
Enable Watchdog Screen: OFF
Number Of Watchdog Packets: 10
Delay Between Watchdog Packets: 59:3
Delay Before First Watchdog Packet: 4:56:6
Console Display Watchdog Logouts: OFF
Maximum Packet Receive Buffers: 10000
Minimum Packet Receive Buffers: 1000
Maximum Physical Receive Packet Size: 4224
New Packet Receive Buffer Wait Time: 0:1
Maximum Interrupt Events: 10

---- Memory

Cache Pool Control Type: 1
VM Allocation Information: OFF
File Cache Maximum Size: -805306368
File Service Memory Optimization: 1
Logical Space Compression: ON
VM Garbage Collector Period: 4:59:9
VM Garbage Collector Looks: 10000
Interactive Screen Timeout: 59:58:7
Wakeup Page Cleaner Delay: 25
Max Page Cleaner Outstanding IOs: 50
Max Page Cleaner Pushes: 1000
Max Page Cleaner Looks: 1000
VM Cache Pool Percentage: 70
VM Cache Pool Maximum Pages Percentage: 0
VM Cache Pool Free Minimum Pages: 64
VM Cache Pool Free Lots of Pages: 96
VM Cache Pool Free Desired Pages: 80
VM Cache Pool Minimum Pages: 10
VM Cache Pool Maximum Pages: -1
Upper Page IO Threshold: 32
Maximum RSS Pages: 5000
Max Deficit: 256
FS Cache Pool Transfer In Yield Type: 0
FS Cache Pool Minimum Percentage To Transfer Out: 4
FS Cache Pool Minimum Percentage To Transfer In: 4
FS Cache Pool Minimum Pages To Transfer Out: 5
FS Cache Pool Minimum Pages To Transfer In: 5
FS Cache Pool Minimum Pages: 1000
FS Cache Pool Maximum Percentage To Transfer Out: 10
FS Cache Pool Maximum Percentage To Transfer In: 10
FS Cache Pool Maximum Pages To Transfer Out: 20000
FS Cache Pool Maximum Pages To Transfer In: 2000
FS Cache Pool LRU Medium: 30
FS Cache Pool LRU Low: 45
FS Cache Pool LRU High: 60
FS Cache Pool Lots of Pages: 1500
FS Cache Pool Desired Pages: 1250
FS Cache Pool Constrain Transfer Out Type: 1
FS Cache Pool Constrain Transfer In Type: 1
FS Cache Pool Blocks Transferred In Before Yield: 10
External Judge Autoload Threshold: 1073741824
Dynamic VM Versus Cache Subsystem Differential: OFF
Dynamic Maximum RSS: OFF
Desired VM Versus Cache Subsystem Differential: 0
Deficit Age: 10
Cache Pool Thread Yield Type: 0
Cache Pool Thread Timeout: 5
Cache Pool Pages Transferred Before Yield: 100
Cache Pool Minimum Percentage To Transfer Out: 4
Cache Pool Minimum Percentage To Transfer In: 4
Cache Pool Minimum Pages To Transfer Out: 5
Cache Pool Minimum Pages To Transfer In: 5
Cache Pool Maximum Percentage To Transfer Out: 10
Cache Pool Maximum Percentage To Transfer In: 10
Cache Pool Maximum Pages To Transfer Out: 20000
Cache Pool Maximum Pages To Transfer In: 10000
Constrain Pages To Transfer Out Type: 0
Constrain Pages To Transfer: 0
Cache Pool Block Transfer Mode: ON
Average Page In Alert Threshold: 2000
Min Age Quantum: 1
Max Age Quantum: 60
Init Age Quantum: 5
Elapse Time Ager Interval: 144
Nonlocked Minimum Pages: 5
Low Grow Rate: 2
High Grow Rate: 8
Maximum Pages To Trim: 10
Dynamic Age Quantum: OFF
Engage Ager: ON
APT Free Dirty Page Threshold: 1000
APT Free Clean Page Threshold: 50
VM Debug Screen: OFF
Restart Server on Address Space Cleanup Failure: OFF
Memory Protection Abend After Restart Count: OFF
Memory Protection Restart Count: 1
Memory Protection No Restart Interval: 1
Memory Protection Fault Cleanup: ON
Garbage Collection Interval: 5:00:0
Alloc Memory Check Flag: OFF
Reserved Buffers Below 16 Meg: 300
Jiggle Memory: OFF
Check Cache: OFF

---- Traditional File System

TTS Screen: OFF
Maximum Rights Vector Entry Pool: 128
Maximum Wait Time For Limbo Space during Volume Mount: 19:8
Purge Files On Dismount: OFF
Volume Log File State: 1
Volume TTS Log File State: 1
Volume Log File Overflow Size: 4194304
Volume TTS Log File Overflow Size: 4194304
Auto TTS Backout Flag: ON
TTS Abort Dump Flag: OFF
TTS UnWritten Cache Wait Time: 1:05:9
TTS Backout File Truncation Wait Time: 59:19:2
Dirty Directory Cache Delay Time: 0:5
Directory Cache Allocation Wait Time: 0:5
Directory Cache Buffer NonReferenced Delay: 5:5
Maximum Directory Cache Buffers: 4000
Minimum Directory Cache Buffers: 2000
Maximum Number Of Internal Directory Handles: 100
Maximum Number Of Directory Handles: 20
Open Callback Timeout: 29:7
Maximum Record Locks Per Connection: 500
Maximum File Locks Per Connection: 2500
Maximum Record Locks: 20000
Maximum File Locks: 200000
Read Ahead Enabled: ON
Read Ahead LRU Sitting Time Threshold: 10:0
Minimum File Cache Buffers: 20
Maximum Concurrent Disk Cache Writes: 500
Dirty Disk Cache Delay Time: 0:5
Minimum File Cache Report Threshold: 20
Auto Mount Mirrored Volume Containing Inactive Device:
Maximum Concurrent opens per file and connection: 10000
Automatically Repair Bad Volumes: ON
Check SubAllocation: OFF
Minimum File Delete Wait Time: 1:05:9
File Delete Wait Time: 5:29:6
Allow Deletion Of Active Directories: ON
Maximum Percent of Volume Space allowed for Extended Attributes: 10
Maximum Extended Attributes per File or Path: 16
Fast Volume Mounts: ON
Maximum Percent Of Volume Used By Directory: 13
Maximum Subdirectory Tree Depth: 25
Volume Low Warn All Users: ON
Volume Low Warning Reset Threshold: 256
Volume Low Warning Threshold: 256
Turbo FAT Re-Use Wait Time: 5:29:6
Compress Screen: OFF
Allow Unowned Files To Be Extended: ON

---- Common File System

Maximum Transactions: 10000
Maximum Concurrent Directory Cache Writes: 75
Immediate Purge Of Deleted Files: OFF
Compression Daily Check Stop Hour: 6
Compression Daily Check Starting Hour: 0
Minimum Compression Percentage Gain: 20
Enable File Compression: ON
Maximum Concurrent Compressions: 2
Convert Compressed To Uncompressed Option: 1
Decompress Percent Disk Space Free To Allow Commit: 10
Decompress Free Space Warning Interval: 31:18:5
Deleted Files Compression Option: 1
Days Untouched Before Compression: 14

---- Novell Storage Services

Emulate Classic NetWare Directory Quotas: OFF
NSS Work To Do Count: 50
NSS Maximum Cache Balance Buffers Per Session: 1024
NSS Cache Balance Timer: 30
NSS Cache Balance Percent: 60
NSS Cache Balance Enable: ON
NSS Buffer Flush Timer: 1
NSS Minimum OS Cache Buffers: 256
NSS Minimum Cache Buffers: 512
NSS File Flush Timer: 10
NSS Closed File Cache Size: 50000
NSS Open File Hash Shift: 16
NSS Auth Cache Size: 1024
NSS ASCII Name Cache Enable: ON
NSS Name Cache Enable: ON
NSS Name Cache Size: 2111
NSS Low Volume Space Alerts: ON
NSS Low Volume Space Warning Reset Threshold: 15
NSS Low Volume Space Warning Threshold: 10

---- Disk

Auto scan for devices: ON
Auto load of CDM modules: ON
Multi-path Support: OFF
Sequential Elevator Depth: 8
Enable IO Handicap Attribute: OFF
Mirrored Devices Are Out Of Sync Message Frequency: 28
Remirror Block Size: 1
Concurrent Remirror Requests: 32
Ignore Partition Ownership: OFF
Ignore Disk Geometry: OFF
Enable Hardware Write Back: OFF
Enable Disk Read After Write Verify: OFF

---- Time

Start Of Daylight Savings Time: (APRIL SUNDAY FIRST 2:00:00 AM)
End Of Daylight Savings Time: (OCTOBER SUNDAY LAST 2:00:00 AM)
Daylight Savings Time Offset: +1:00:00
TIMESYNC Correction Floor: 1
TIMESYNC Configured Sources: OFF
TIMESYNC DEBUG: 0
TIMESYNC Max Log File Size: 1048576
TIMESYNC NTP Client Port: 0
TIMESYNC Immediate Synchronization: OFF
TIMESYNC Maximum Offset: 600
TIMESYNC Offset Ceiling: 315532800
TIMESYNC Polling Count: 3
TIMESYNC Polling Interval: 600
TIMESYNC RESET: OFF
TIMESYNC Restart Flag: OFF
TIMESYNC Service Advertising: ON
TIMESYNC Short Interval: 10
TIMESYNC Synchronization Radius: 2000
TIMESYNC Time Adjustment: None scheduled.
TIMESYNC Time Sources: ;
TIMESYNC Type: SECONDARY
Time Zone: EST5EDT
Default Time Server Type: SECONDARY

---- NCP

NCP Exclude IP Addresses: NONE
NCP Include IP Addresses: ALL
NCP over UDP: ON
NCP TCP keep alive interval: 9:53:2
Minimum NCP TCP receive window to advertise: 4096
NCP TCP receive window: 23360
Enable UDP Checksums on NCP packets: 1
NCP Packet Signature Option: 1
Client File Caching Enabled: ON
NCP Protocol Preferences:
NCP File Commit: ON
Display NCP Bad Component Warnings: OFF
Reject NCP Packets with bad components: OFF
Display NCP Bad Length Warnings: OFF
Reject NCP Packets with bad lengths: OFF
Maximum Outstanding NCP Searches: 51
Allow Remote Command Line Processing: 0
Allow Change To Client Rights: ON
Allow LIP: ON
Level 2 OpLocks Enabled: OFF

---- Miscellaneous

Server Failure Notification Name:
RollCall Trace Screen: OFF
Enable SECURE.NCF: OFF
Allow Audit Passwords: OFF
CDBE Flush Time: 4:56:6
Enable Event Report Screen: OFF
Command Line Prompt Default Choice: ON
Command Line Prompt Time out: 10
Sound Bell For Alerts: ON
Replace Console Prompt With Server Name: ON
Alert Message Nodes: 20
Classic Work To Do Pre Check Flag:
Worker Thread Execute In A Row Count: 10
Halt System On Invalid Parameters: OFF
Display Relinquish Control Alerts: OFF
Display Old API Names: OFF
CPU Hog Timeout Amount: 1:00:0
Developer Option: OFF
Display Spurious Interrupt Alerts Threshold: 200
Display Lost Interrupt Alerts Threshold: 10
Display Spurious Interrupt Alerts: OFF
Display Lost Interrupt Alerts: OFF
Pseudo Preemption Count: 40
Global Pseudo Preemption: ON
Minimum Service Processes: 70
Maximum Service Processes: 590
Allow Unencrypted Passwords: OFF

---- Error Handling

Server Log File State: 1
Server Log File Overflow Size: 4194304
Boot Error Log File State: 3
Boot Error Log File Overflow Size: 4194304
Boot Error Log: ON
Hung Unload Wait Delay: 30:0
Auto Restart Down Timeout: 180
Auto Restart After Abend Delay Time: 2
Auto Restart After Abend: 1

---- Directory Services

NDS trace to screen: OFF
NDS trace to file: OFF
NDS Trace Filename: SYSTEM\DSTRACE.DBG
NDS Enable Login Updates: ON
ttf: OFF
DSTrace:
Bindery Context:
NDS external reference life span: 192
NDS inactivity synchronization interval: 60
NDS synchronization restrictions: OFF
NDS servers status: UP/DOWN
NDS janitor interval: 720
NDS Distributed reference link interval: 780
NDS Login Updates Delay: 5
NDS Bindery QOS mask: 8
NDS Bindery QOS delay: 150
NDS backlink interval: 780
NDS trace file length to zero: OFF
NDS bootstrap address:
Check Equivalent To Me: OFF
Default Tree Name: RISPNET

---- Multiprocessor

System Threshold: 1536
Auto Clear Interrupt Statistics: ON
Auto Start Processors: ON

---- Service Location Protocol

SLP Version Mode: 0
SLP Maximum WTD Queue: 15000
SLP Static Scope List: ON
SLP MCA Timeout: 16
SLP Exclude IP Addresses: NONE
SLP Include IP Addresses: ALL
SLP Agent IP Address: FIRST
SLP API Handicap: 50
SLP Maximum Memory Percent: 15
SLP Cache Timeout: 120
SLP Enable UA Multicast: ON
SLP Register nwserver: ON
SLP nwserver NLM names: OFF
SLP Maximum WTD: 32
SLP Reset: OFF
SLP Scope List:
SLP Close Idle TCP Connections Time: 300
SLP DA Heart Beat Time: 10800
SLP DA Event Timeout: 15
SLP SA Default Lifetime: 3600
SLP Retry Count: 3
SLP Debug: 0
SLP Rediscover Inactive Directory Agents: 60
SLP Multicast Radius: 255
SLP DA Discovery Options: 15
SLP MTU Size: 1450
SLP Broadcast: OFF
SLP TCP: OFF

---- Licensing Services

NLS Search Type: 0
NLS REPORT DATA: ON
NLSTRACE DETAIL: 1
Store NetWare 5 Conn SCL MLA usage in NDS: OFF
NLSTRACE: 0

---- Acpi

Acpi Auto Power Down Delay Time: 30:0
Acpi Auto Power Down:


********************************

<#NDS_Info>
----------------------------------------------
---- Begin Directory Services Information ----

---- Configuration ...
Host Server:
Tree Name:
Bindery Context(s):


---- Backup Exec Schema Extensions ...
BkupExec:JobQueue
BkupExec:JobServer
BkupExec:ControlData

---- Server Information ...
Attributes for "CN=X4.OU=lincoln.OU=HQ.O=RISP"
Attribute: ACL
Messaging Server
Network Address
CN=X4.OU=lincoln.OU=HQ.O=RISP
CN=ADMIN.O=RISP
CN=ADMIN.O=RISP
Attribute: Back Link
32842
CN=X4.OU=lincoln.OU=HQ.O=RISP
Attribute: CN
X4
Attribute: Network Address
Address Type:9
Address Length:6
Address: The Net Address is invalid!
Address Type:8
Address Length:6
Address: The Net Address is invalid!
Attribute: Object Class
NCP Server
Server
Top
Attribute: Public Key
Length: 0xfc
Data:

01000000 04000000 30006C00 0000E200 30003C00 76000000 00004F00 55003D00
6C006900 6E006300 6F006C00 6E002E00 4F005500 3D004800 51002E00 4F003D00
52004900 53005000 00004300 4E003D00 58003400 2E004F00 55003D00 6C006900
6E006300 6F006C00 6E002E00 4F005500 3D004800 51002E00 4F003D00 52004900
53005000 00000100 00000300 01006C00 42560400 312E3000 42430100 03424101
0030424C 0200A401 4E4E3500 B97C96FB F5641850 80AE357C 3263AD5D 7D2F0FD6
3CE77155 DB6DF356 0D1D1D20 FB9F4298 E282C94E 7FFBD8C0 555ECA4F 79059B25
0C454E03 00010001 4D410800 1BD248D2 7E0E3199 64005055 52534146
Attribute: Status
2
Attribute: Version
Novell NetWare 5.60.05
Attribute: Revision
17
Attribute: DS Revision
1035030
Attribute: Used By
Attribute: GUID
Length: 0x10
Data:

00EB9CD0 7136DA11 B02A000B CDC570BD
Attribute: creatorsName
CN=ADMIN,O=RISP
Attribute: modifiersName
CN=ADMIN,O=RISP
Attribute: languageId
English, United States
Attribute: ndsPredicateStatsDN
CN=X4-PS.OU=lincoln.OU=HQ.O=RISP
Attribute: LDAP Server
CN=LDAP Server - X4.OU=lincoln.OU=HQ.O=RISP
Attribute: NLS:Licenses Used
Attribute: indexDefinition
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0

---- Backup Exec Account Information ...
Attributes for ".Backup_Exec.OU=lincoln.OU=HQ.O=RISP"

---- Replica(s) ...
Server name:
Replica type:
Replica state:
Replica number:

Server name:
Replica type:
Replica state:
Replica number:

---- Partition(s) ...
** No partitions exist on this server...

---- End Directory Services Information ------
----------------------------------------------



**** End of BEDIAG results ****

[Sheri_Madison]

Curious to learn whether you found the issue. We are experiencing the same problem. Have been on phone support with Veritas for numerous hours without resolution. Running 9.1, build 1158.4 on a Netware 6 SP6.5 server.

[Rafael_Tejada]

As of today, I still haven't received any help on this matter. Seems like I have three more servers with the same problem. I've uninstalled 9.1 on the servers, removed all Backup objects through the NDS, removed Bkupexec folders, reinstalled also initiated a new SMDR properties with the SMDR NEW commands.......with no luck.

At the servers , I start the Bestart command..........looks likes it going to load.........stop on the NDMPD.NLM area.........then dies and goes back to the server prompt. It's very frustrating because I resolved a similar issue before and I have used the 9.1 on this system and it's worked before til I had to reinstall the latest 9.1 with the latest drivers.
Also modified the startup.ncf file as requested through the knowledge base, still no luck. I must be missing something, I've had this version worked before.

BTW. With the other technical issues I've encountered, seems like no one even cares to respond anymore. I've had posted questions for months with no responses at all. Symantec/Veritas has gone down the tubes

[Rafael_Tejada]

To add to my previous reply.........heres is my bkupexecc.fax log .....

#-------------------------------------------------------------------------------
# Backup Exec SureStart
#
# K3\SYS:\BKUPEXEC\BKUPEXEC.FAX
#
# Wed Dec 14 11:32:36 2005
#-------------------------------------------------------------------------------

Beginning the initialization procedure
Current system parameters are as follows
LoadType: Remote Agent
API mode: Directory Services
Driver: Not specified
DMA mode: Use memory below 16 megabyte boundary
Driver mode: Asynchronous
ASPI Manager: Using BECDM.CDM
Driver bus mode: Physical Bus
Autoload Novell TSAs: 1
Autoload B2D: 1
Validate NLM Versions: 1
Validate memory: 1
Debug: On: 0 ZL: 0
Internal: RA: 0 RQ: 0 MC: 0 UB: 0 LE: 0
Initializing internal control parameters
Initializing secondary control parameters
Couldn't retrieve the previous products history path from upgrade.cfg, setting it to default

Initializing system operating paths
Initializing NOS Links
Initializing Load Subsystem
Initialization complete
Validating system environment
Validating system memory resources
Cache boundaries are 65%High - 40%Medium - 20%Low
65% of the cache buffers on the server are currently available.
System environment validation has completed
-------------------------------------------------------------------------------
CHECKING SERVER FILES which may need to be updated.
Checking module NCSSDK.NLM for possible update.
Version on server is OK.

Done checking server files which may need to be updated.
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Checking for cluster services.
Cluster services not available.
-------------------------------------------------------------------------------
Loading dependent modules
Module TLI.NLM is already loaded
Module DSAPI.NLM is already loaded
Module NETDB.NLM is already loaded
Module SMDR.NLM is already loaded
Module TSAFS.NLM is already loaded
Module TSANDS.NLM is already loaded
Loading module NDMPD.NLM


As you can see in the last line, it's trying to load the NDMPD.NLM module in the Bestart screen with green fonts...........then after a min or two.......it just kicks back to the server prompt with this log that i've just posted. Can anyone help?

Thanks

[Stephen_Goss]

Hi All,

I had issues very similar to this posting. I had problems with BE ver. 9.1. & 9.2 not loading correctly on startup on all my Novell 6.5 sp 5 servers. I could load it at the command prompt once the server was completely loaded or put a pause before bestart.ncf. It all started when I upgrade the NetWare server to service pack 4a with Netware 6.5

I worked with BE tech support for over 6 weeks and they just had me test this and that. I explained to them that I am not a beta tester and needed to get this resolved. They claimed that no other customers had problems with BE not loading correctly and I ended up closing the case. Bull.... Anyway, we did agree that it is a timing issue with Netware and BE. I am going to post some work arounds that might help someone that is having the same problems. Note: My NetWare servers are less than a year old with high end processors, memory and the newest tape drives available.
********************************************

It is recommended that the above error message be resolved by eliminating the driver load at startup. There are two scenarios relating to how the driver is loaded: Note: This help me slow do the startup of BE, so I could have it auto load in the autoexec.ncfg correctly If I restarted the server.

1. During the custom installation method of NetWare, a storage device .CDM driver must be selected - if any of the above drivers are selected at this time, they will load automatically on startup through the NetWare Peripheral Architecture NLM (NWPA.NLM). In this instance, apply the following:
Add the "UNLOAD " command to the "SYS:SYSTEM\AUTOEXEC.NCF" file. If you automatically start Backup Exec from the autoexec.ncf file, ensure that this unload statement is before the "BESTART" line
Add the load line "LOAD NWASPI.CDM" to the "C:\NWSERVER\STARTUP.NCF" file before any .HAM drivers are loaded
Restart server

2. NetWare was installed via a "simple" installation method and the above .CDM driver is loaded via "C:\NWSERVER\STARTUP.NCF". In this instance, apply the following:
Delete the load line for the .CDM driver causing the conflict from "C:\NWSERVER\STARTUP.NCF"
Add the load line "LOAD NWASPI.CDM" to the "C:\NWSERVER\STARTUP.NCF" file before any .HAM drivers are loaded
Restart server
Note - if method 2 still does not resolve the issue, apply method 1.

I ended up using method 1 and it slowdown the starting up BE. It had to unload the NWASPI.CDM and load BECDM.CDM driver. On 2 of my server I also had to put a 60 second pause before loading BE and the end of the auotexec.ncf. Rule of thumb on starting BE is to have it at the end of the autoexec.ncf

Sample:
####################################
# Added by Backup Exec #
####################################
delay 60
BESTART.NCF
####################################


Something else I found that did not help me, but might help you.

If you're using Backup Exec for NetWare, visit support.veritas.com and get the latest Backup Exec build. Find your serial numbers (in the Backup Exec Job Manager screen under Options somewhere), install the new version, then edit sys:system\bestart.ncf to include the additional parameter -b in the LOAD BKUPEXEC line. This loads becdm.cdm instead of nwaspi.cdm.


I am going to post my bestart.ncf configurations. They had me add the ?w9 switch to my. Remember, I am running ver. 9.2 on my server now. I am unable to compare it to ver. 9.1

SEARCH ADD SYS:\BKUPEXEC\NLMS
LOAD SYS:\BKUPEXEC\NLMS\BECDM.CDM
LOAD SYS:\BKUPEXEC\NLMS\BKUPEXEC.NLM -tl -aa -dy -tc -tj -s -w9 %1 %2

As you can see, the line LOAD SYS:\BKUPEXEC\NLMS\BECDM.CDM loads the correct CDM driver and do not need the switch -b

Cheers :)

[criley]

The biggest problem that I can see with your server 'X4' is that your tape drive and library are connected to a RAID controller. This is not supported or recommended, tape hardware should be connected to a SCSI controller..

Also, remove NWASPI.CDM from startup.ncf - BE does not need this and it can also cause problems.