About piscu

piscu · 04-15-2011

Hi, I have one Robot defined and two Drives in my NB configuration. We have upgraded to nb7.1 and after the upgrade all was up and running and I could see my Robot and the two Drives: /usr/openv/volmgr/bin/sgscan /dev/sg/c0tw50014380032c1d5al0: Tape...

piscu · 04-20-2011

Thanks for the answers... I think I found the answer in the NetBackup Device Config Guide: There it's written that NetBackup requires that Solaris Multiplexed I/O (MPxIO) be disabled. MPxIO is enabled by default on Solaris 10 x86 systems. Therefore...

piscu · 04-18-2011

I tried it but it put again "50014380032c1d5a" and 'sgscan' didn't show the Robot after the sg.install. I made the following: # cd /usr/openv/volmgr/bin/driver # /usr/openv/volmgr/bin/sg.build all -mt 15 -ml 1 # more sg.conf # Configuration file f...

piscu · 04-18-2011

After each reboot I get the same device address... It seems that the raw file is missing where the device address is pointing to. Here are the messages after the last reboot: ... Apr 15 10:14:18 hsrvbkpt1 scsi: [ID 799468 kern.info] st3 at fp0: nam...

VOX

User Statistics

User Activity

After Reboot sg path does not exist

Solution found in NetBackup Device Config Guide

I tried it but it put again

After each reboot I get the