About Beryl_Tesler

Beryl_Tesler · 01-11-2006

I am using an HP SureStore Dat 40x6 (Robotics Tape Drive) and have been experiencing NO Compression on some of my backups. I have them set to Hardware otherwise software and the best I get is 1.25 on incrementals, but nothing on Full Backups. This ...

Beryl_Tesler · 01-18-2006

Thank you for your help. I am going to assume the best I can get out of the combination of hardware and software is only about 25-30% compression. I do not think that either your compression or that of the hardware will impove much beyond that. An...

Beryl_Tesler · 01-18-2006

Ken,I think your responseo is the most realistic I have recieved. I think between the Hardware and the software there is some conflict that doesn't allow maximum compression. Everyone always points a finger at the other vendor. I am getting about ...

Beryl_Tesler · 01-17-2006

I tried Software compression and it increased from 21gb to 25gb. This is certainly better but not nearly any multiple of the 20gb native. It would be much better to get at least at 50% bump rather then a 25% bump. This would indicate to me that th...

Beryl_Tesler · 01-12-2006

Please see first entry for hardware/Equipment details.I checked the event viewrand there are no indications of tape errors. The properties of the HP drive are correct, as per Veritas documentation. If you think using software compression will help, ...

Beryl_Tesler · 01-11-2006

Thank you for your quick response. I have played with these setting and do understand that compression would differ with different file types. But, I am getting ZERO compression for the whole backup, or at best 1.07:1, which is practically the same...

VOX

User Statistics

User Activity

Tape Capacity

Re: Tape Capacity

Re: Tape Capacity

Re: Tape Capacity

Re: Tape Capacity

Re: Tape Capacity