No. There is no SAS port available on the 5220 or 5230 Appliance.
The only connection that can be used for a tape library is fibre channel.
See 'Tape out' section in this TN: http://www.veritas.com/docs/000074496
Please excuse the firm tone of the following text.
Making a mistake with zoning opens up a very real opportunity/possibility to take your entire SAN off-line.
If you do not know how to save a zoning config before making any changes, then you should not be zoning.
If you do not know how to restore a zoning config, then you should not be zoning.
If you have never zoned before, i.e. if this is your first ever time at zoning AND are going to be using the GUI - then do not zone on your own - get someone to help you, and verify your actions with you.
If you corrupt AND loose your zoning config (or do not have a save config) - then it may take several to many hours or even days to re-create the configuration.
The 'terms' upload/download for saving/restoring a SAN zoning configuration can be confusing - be sure that you get it right.
SAN zoning is typically a "must not fail, cannot fail" type activity - i.e. you typically have one, and only one, chance to get it right.
