09-17-2010 12:34 PM
Hello we just did a upgrade from backup exec 10d to 2010, I've installed the new Linux agent on our Linux server yet were unable to access the Linux sever via the Windows 2008 R2 media server it keeps coming back with
09-17-2010 01:11 PM
Is the RALUS running on the Linux server...Also, is the firewall / SELINUX disabled ?
09-17-2010 11:35 PM
Your problem might be due to the fact that RHEL 5.5 is not supported. The SCL only list 5.4. See the SCL below
http://download1.veritas.com/support/products/Backup_Exec_for_WindowsNT/329254.pdf
09-18-2010 12:40 AM
create one more User add to member of beoper group then try
09-18-2010 02:36 AM
This looks obvious (but you never know ;) :
You can access them from Backup Exec console menu :
You can also test them :
I hope it will help you. I also got these problems once.
09-19-2010 12:29 AM
make sure the backup exec daemon is starting,
/etc/init.d VRTSralus.init start
09-20-2010 06:36 AM
Yes the RALUS agent is running and both the firewall and SELINUX are disabled.
09-20-2010 06:38 AM
I've tried it no change
09-20-2010 06:39 AM
the agent is running
09-20-2010 06:41 AM
PaulDca,
Did you check the points I gave you ?
I already had this problem and it was due to the passwords in Backup Exec
Good luck !
Denis
09-20-2010 06:43 AM
So I believe that for the system login, you are using the root username of that linux box ?
09-20-2010 06:44 AM
username and password do match, also I've tried different user accounts and I've reset the passwords on Linux side as well.
09-20-2010 06:45 AM
Yes