10-11-2012 03:14 AM
Dear all !
Some day, i try backup data with Symantect Backup Exec 10d for windows server but have many problem.
Always have error , please see picture bellow more details
I'm very tired !
I save backup data on S: ( This removeable disk)
I make a new folder B2B, make a new Media Set , make a new Device back up (Backup-to-disk-folder) . but still error.
Event viewer log :
Please help me !!
10-11-2012 03:23 AM
Hi,
Check the TN below for troubleshooting tips on this:
http://www.symantec.com/business/support/index?page=content&id=TECH130540
Thanks!
10-11-2012 02:46 PM
Hi kieum,
How much space do you have on this drive?
Reboot your server and then create another b2d job to run the backup to.
10-11-2012 07:07 PM
Dear Lmossla !
That disk have free space 1,2TB !
I rebooted server and create another B2D job but the same error !
10-11-2012 11:08 PM
OK...stop the BE services, and then run an NTbackup to that external drive...
10-12-2012 01:16 AM
Also, Use the B2D Test tool on his volume and check if there are any errors
10-14-2012 07:08 PM
Dear all Symantec support team !
I'm try my best but i dont know why probem can not issue, every one can be support via team viewer ?
Please help me ! Too long time, i can issue that problem.
My boss waring me :((. I dont want lost my job !
I'm sad at heart !
Thanks for all !
10-14-2012 08:19 PM
Delayed write fail is a hardware problem and OS problem. It has nothing to do with BE. It is probably caused by a bad connector, e.g. if you are using a USB disk and the USB connector is loose. I would suggest that you change your USB cable and the socket.
Also you can try to disable the write caching. See this document
http://support.microsoft.com/kb/259716
If this document does not match your OS, search the Net for "disable write caching"
10-15-2012 12:55 AM
...have you even tried to run an NTbackup?