cancel
Showing results for 
Search instead for 
Did you mean: 

backup exec sauvergarde de nas

tilou2991
Level 2

Bonjour à tous,

Je me demande comment je peux sauvegarder mon NAS(NAS4FREE) avec le logiciel Backupexec 2010 R3 ? car le logiciel ne veut pas se connecter a un lecteur réseau

Le NAS est un vieux poweredge 2600 equipé de 2 Xeon et 4G. Comme stockage RAID 1 pour le systéme (2*146G en 10K) et RAID 5 pour le Stockage (6*300G en 10K)

Lecteur de bande Powervault LT2000

1 ACCEPTED SOLUTION

Accepted Solutions

tilou2991
Level 2

Yes I thought this protocol but can not be created if it already has SMB shares. The only way I've found is deleted NAS4FREE and install a Windows Server

Thank you for your help


Oui j'ai pensé à ce protocole mais il ne peut pas être créer s'il a déjà des partages SMB. Le seul moyen que j'ai trouver, est de supprimé NAS4FREE et d'installer un Serveur Windows

Merci de ton aide

View solution in original post

2 REPLIES 2

CraigV
Moderator
Moderator
Partner    VIP    Accredited

Hi,

 

There are a couple of caveats for backing up to a NAS...see below:

http://www.symantec.com/docs/TECH14963

However, I've checked out the specs of that software you are using and it is capable of iSCSI. Why not create iSCSI LUNs and present these to your media server? They appear as local disks and should get around your issue you are experiencing?

I also wrote an article around this which you may want to read up on...

https://www-secure.symantec.com/connect/articles/using-iscsi-backup-your-environment

THanks!

tilou2991
Level 2

Yes I thought this protocol but can not be created if it already has SMB shares. The only way I've found is deleted NAS4FREE and install a Windows Server

Thank you for your help


Oui j'ai pensé à ce protocole mais il ne peut pas être créer s'il a déjà des partages SMB. Le seul moyen que j'ai trouver, est de supprimé NAS4FREE et d'installer un Serveur Windows

Merci de ton aide