sony AITi390S-3Ex (SDX-800V) not recognized on BE9.1

[fma]

sony AITi390S-3Ex (SDX-800V) not recognized on BE9.1

Hi,
I'm using BE9.1 installed on Windows server 2003 and it don't recognized my sony tape AITi390S-3Ex (SCSI).
I tested with sony and symantec drivers and the support is not recognized. I can't change anything in the properties of the tape (compression, support types...).
Have you a driver or any solution ?
Is this tape compatible with BE9.1 ?
François

[Ken_Putnam]

v9.1 has been end-of-life since January 18, 2007, so new driver packs will be released

(I do see the SDX-700V and SDX-900V are both listed on the most recent HCL)

if you install the OEM drivers, and if NTBackup can see the drive, then BackupExec should be able to also

[fma]

Thanks,

I'm going to try but I think that in my first install, i was using OEM driver and BENT 9.1 doesn't recognize the tape...

Regards

[Ken_Putnam]

is it a SCSI interface?

(v9.1 did not support USB tape drives )

[fma]

Yes I use an internal SCSI interface.

The tape is well recognized by the system (windows server 2003)

[Ken_Putnam]

Don't know what to tell you, except it sounds like it's time to upgrade BackupExec

[fma]

OK, I'am going to try with version 12 next week.

Thanks !