Showing results for 
Search instead for 
Did you mean: 

Failed to Start File System Check on /dev/mapper/system-log during Boot up

Level 2

Good afternoon,

I upgraded my NetBackup 5250 from 10.0 to 10.3 and after rebooting the system I am running into this issue: 

Failed to Start File System Check on /dev/mapper/system-log.

Then sends the appliance into emergency mode and only able to input "journalctl" 

Does anyone have any ideas on how to fix this issue. Thank you for any help.


Level 5

the base OS is RHEL so if it is going in emergency mode it means something is broken (like a mount point).
if you have active support involve them, if you do not have active support, take a look at below article: