cancel
Showing results for 
Search instead for 
Did you mean: 

NetBackup Flex Appliance WORM repl./AIR?

EvenHornfelt
Level 4

Hello, deploying (2x) FlexOS 2.1, NBU 9.1.0.1 , Master, Media MSDP, AIR ok but using WORM storage shows everyting ok on source side, but no import job and nothing get catalogized on target side. Anyone seen this or got AIR working using WORM?

1 ACCEPTED SOLUTION

Accepted Solutions

EvenHornfelt
Level 4

Finally! after working with support.....trying to fix, then trying to remove, and finally configurated again. Now on versions Flex OS 2.1, NetBackup 10.0, Worm server 16.0......some differences in wizards..... testing...and OK.

(not able to pinpoint what went wrong.)

View solution in original post

3 REPLIES 3

davidmoline
Level 6
Employee

Hi @EvenHornfelt 

Firstly, I've not done this, but WORM only changes how retention within the pool behaves, everything else should operate similar to normal MSDP. The main difference between the two setup is that the WORM storage server is not a media server, so will require one at each end to facilitate the operations. 

Have a review of thes two articles which may describe the behaviour you observe (and solutions):
https://www.veritas.com/content/support/en_US/article.100050294.html
https://www.veritas.com/content/support/en_US/article.100051154.html

Cheers
David

Hi, yes, we have found the two articles. Kind of similar, but not same. Strange behaviour. -> support case...

Even.

EvenHornfelt
Level 4

Finally! after working with support.....trying to fix, then trying to remove, and finally configurated again. Now on versions Flex OS 2.1, NetBackup 10.0, Worm server 16.0......some differences in wizards..... testing...and OK.

(not able to pinpoint what went wrong.)