05-27-2015 06:54 AM
Solved! Go to Solution.
05-27-2015 07:25 AM
bpimport -create_db_info -id NB4643 -server rchnbump1
should work...
I would expect the 'no server' version of the command to try master server.
No need to try and change ownership as this media is not Assigned yet.
What happens when you specify rchnbump1?
What is the actual media type of this tape? LTO3 I presume?
The media type in NBU is hcart2.
What density are the tape drives configured for rchnbump1 in TLD(2)?
And what is the real media type?
So, in NBU, the media type must match - tape and drive must be hcart2.
If LTO3 tape, actual drive type must be LTO3, LTO4 or LTO5 to allow tape mount and read of media.
05-27-2015 07:10 AM
Please show us output of this command on the master:
nbemmcmd -listmedia -mediaid NB4643
Also share full syntax of bpimport create_db_info that was used for this tape.
05-27-2015 07:14 AM
(Linux)root@kronos:/> nbemmcmd -listmedia -mediaid NB4643
NBEMMCMD, Version: 7.6.0.4
====================================================================
Media GUID: 724cce66-041c-11e5-8000-9f7d800df82c
Media ID: NB4643
Partner: -
Media Type: HCART2
Volume Group: 000_00002_
Application: Netbackup
Media Flags: 1
Description: Added by Media Manager
Barcode: NB04643L3
Partner Barcode: --------
Last Write Host: NONE
Created: 05/27/2015 07:59
Time Assigned: -
First Mount: -
Last Mount: -
Volume Expiration: -
Data Expiration: -
Last Written: -
Last Read: -
Robot Type: TLD
Robot Control Host: rchnbump1
Robot Number: 2
Slot: 141
Side/Face: -
Cleanings Remaining: -
Number of Mounts: 0
Maximum Mounts Allowed: 0
Media Status: ACTIVE
Kilobytes: 0
Images: 0
Valid Images: 0
Retention Period: -
Number of Restores: 0
Optical Header Size Bytes: 0
Optical Sector Size Bytes: 0
Optical Partition Size Bytes: 0
Last Header Offset: 0
Adamm Guid: 00000000-0000-0000-0000-000000000000
Rsm Guid: 00000000-0000-0000-0000-000000000000
Origin Host: NONE
Master Host: -
Server Group: -
Upgrade Conflicts Flag:
Pool Number: 23
Volume Pool: Offsite-I500
Previous Pool Name: -
Vault Flags: -
Vault Container: -
Vault Name: -
Vault Slot: -
Session ID: -
Date Vaulted: -
Return Date: -
Media on Hold: 0
====================================================================
Command completed successfully.
The bpimport I tried two different ways:
bpimport -create_db_info -id NB4643 -server rchnbump1
bpimport -create_db_info -id NB4643
05-27-2015 07:25 AM
bpimport -create_db_info -id NB4643 -server rchnbump1
should work...
I would expect the 'no server' version of the command to try master server.
No need to try and change ownership as this media is not Assigned yet.
What happens when you specify rchnbump1?
What is the actual media type of this tape? LTO3 I presume?
The media type in NBU is hcart2.
What density are the tape drives configured for rchnbump1 in TLD(2)?
And what is the real media type?
So, in NBU, the media type must match - tape and drive must be hcart2.
If LTO3 tape, actual drive type must be LTO3, LTO4 or LTO5 to allow tape mount and read of media.
05-27-2015 07:54 AM
Oh for crying out loud. lol
Sometimes you just need a second set of eyes. I guess I had tried a handful of tapes so many times this way, and that way, that after correcting the media id I hadn't tried it again specifying the rchnbump1 name. That worked.
Marianne, seriously, if you're ever in Dallas I'm buying you a beer. ;)
Susan
05-27-2015 07:55 AM
.
05-27-2015 07:59 AM
We all need that 2nd pair of eyes!
Good luck!
Hope I make it to Dallas in this lifetime... :)