11-10-2011 06:45 AM
Hi Folks,
I've got a solaris 5.10 server with a HP tape library (Model MSL2024 1 LTO-4 Ultrium 1760 SAS Tape Library AK378A) connected to it by SAS.
I'm running Netbackup 6.5 on the solaris server, but from the netbackup java console, I CAN'T find the media device attached to the host through the device Configuration Wizard.
Did I forget to configure something? Is HP tape libray need to be manually added to the netbackup configuration.
When running HP Libray Tape Tool, when I run a hardware scan, the drive is been detected; and get the information out of it:
Libraries/Autoloaders:
Processors/Enclosures:
Drives:
1 HP Ultrium 4-SCSI (Address: 0.1.0[st@1,0-/dev/rmt/0])
===============================================
Main > Drive Information >
--------------------------------------------------------------------------------------------------------------------------------------------------
The following is identity information for the selected device. You can use commands to select functionality to perform on this device.
Product ID : Ultrium 4-SCSI
Drive Technology : LTO
Mech. Serial Number : HU194XXXX
Firmware Rev : U51W/MSL G3 Series SAS
Target ID : 1
Target LUN : 0
OBDR Capability : Not Supported
WORM Capability : Supported
As I used to work with NB under windows, I'm not quite familiar under solaris so any help will be welcomed !
Thanks
11-10-2011 06:52 AM
check the messages file and run sgcan
11-10-2011 07:37 AM
I've seen this on Solaris
You need to rebuld the sg Driver
Follow these technotes
http://www.symantec.com/business/support/index?page=content&id=TECH63095
http://www.symantec.com/business/support/index?page=content&id=TECH31047
11-17-2011 08:04 AM
any luck rico?