04-02-2012 11:42 AM
OpsCenter (non-Analitics mode) 7.1.0.3 running on Win2k8 R2 x64 which is also a NetBackup 7.1.0.3 master and has a single SCSI LTO2 drive. Media server for this master is 7.1.0.3 on 2k8 R2 x64 and has a single LTO4 drive/eight slot changer attached via SCSI.
Additional master (different domain) running 7.1.0.3 on Win2k3 x32 and has a six LTO2 drive library attached via fibre.
Since the March MS patches were installed OpsCenter's default "drive throughput" and "drive utilization" reports are blank (they report zero drives) unless I edit the report and select only the six drive library by serial #. Then it reports properly for those six drives. This all did work fine (all eight drives reported) before the patches.
Where do I start looking to see what is failing when pulling info from the two W2k8 R2 boxes?
Thanks.
Solved! Go to Solution.
04-09-2012 03:29 PM
Things are being reported once again after another reboot. But there is a hole in the data. So aparently something happened post-patch-install-reboot that needed a second reboot to fix...
04-09-2012 03:29 PM
Things are being reported once again after another reboot. But there is a hole in the data. So aparently something happened post-patch-install-reboot that needed a second reboot to fix...