About AndrewPBG

AndrewPBG · 10-22-2010

Are there any release notes for the 9.0.2 release of BESR 2010? I've noticed it's up on FileConnect, but I don't see anything on the support or knowlege base sites. Thanks!

AndrewPBG · 07-24-2009

This seems to be a common topic, so I'll share what's worked well for me. This will allow you to use a rotation of any number of USB disks, avoid creating multiple copies of the recovery points (offsite feature), run incrementals if the drive isn't s...

AndrewPBG · 10-22-2010

There will be a "Load a Driver" button visible directly on the main screen after booting the SRD. Feed it a 32 bit Vista driver (this is the platform the SRD is built on) and you're off to the races. At the end of the recovery stage, the SRD will ask...

AndrewPBG · 10-22-2010

Recovering to a system with a different RAID controller is one of the main features of BESR. There is a bug I've found with Server 2003 getting the Server 2008 version of the lsi_sas.sys driver for LSI MegaRAID controllers (it causes a 0x000000D1/DRI...

AndrewPBG · 01-15-2010

The script just deletes files when the drive's free space falls below 1GB. You could try adjusting the intProtectForHours variable, which will force the script to only delete files older than that number (in hours). However, I suspect that either som...

AndrewPBG · 01-06-2010

I've always found that a job could only be targeted to a single local path, UNC path, or two drive aliases (the second using the "offsite" feature). Since each drive has a different alias, the backup will fail to run unless the job is retargeted to t...

AndrewPBG · 09-18-2009

I've seen this happen once on a 2003 server. It turned out to be that the COM+ system was damaged. Microsoft's KB315296 has the details on flushing and reinstalling COM+, but don't be surprised if a few programs need to be reinstalled afterwards as w...

VOX

User Statistics

User Activity

BESR 2010 SP2/9.0.2 Release Notes?

HOWTO: USB Drive Rotation with BESR 7.0-8.5

There will be a "Load a

Recovering to a system with a

The script just deletes files

I've always found that a job

I've seen this happen once on