Hello,
Unbeknownst to myself one of my NetApp Filers which hosts two LTO5 drives had credentials changed and the drives went down. I updated the credentials and now I can authenticate (tpautoconf -verify filername) and I can see the drives (tpautoco...
Hello,
Working with a Windows 2008 64-Bit box for the first time as a media server in our DMZ. Was able to install NBU 7.0.1 on the box, but can’t successfully configure drives or robot. Drives are HP LTO5 in a Quantum i6000 Library. Robotic c...
It turned out that even though it accepted the new credentials I received from the filer owner and I was successfully able to run tpautoconf the credentials had to be reset on the filer side and then on the NetBackup side again before it would start ...
Hello All,
I can't say with complete confidence that I truly know the solution, but I believe updating the license keys may have done it.
I tried testing each step of the way and that was the last thing I did before the drives configured correctly.
I...
It's very strange because we have the Quantum and two old Storage Tek 700e's all controlled by the master. I get the same issues no matter which one I try and add to the media server.
The command took and media server shows active for tape and disk, but it still shows robot as not enabled after delete, LTID restart,robot re-add, LTID restart
I updated the keys as well as a stop/restart of NetBackup on the media server. I'm still at the same point.
I try to add from the wizard and it detects the tape drives, but not robot. The drives come up in the wizard as limited via no known robot.
...
