Hi, I remember that UFS encapsulated disks can not be used with the mount option "logging". Is this still valid for SF 5.0 ? Is there a patch that allows this? Thanks
Hi, We have a system with a diskgroup, dg1. We have another site running with the same configuration and is used for disaster recovery.We are trying to import a diskgroup after using EMC's MirrorView to replicate the disks in LUN level. When we bring...
Hello,
I would like to fine tune the DMP configuration in VxVM 5.0, Solaris 10
Our problem is that it takes too long when a fiber cable is disconnected/connected and until DMP disable/enable paths.
Example:
in OS log file , after connecting ...
Hi,
We are using SFRAC 5.0 installation over Solaris 10 with EMC connected external storage.
Everything runs fine except for storage redundancy.
The servers are connected to the EMC in multipule paths but until DMP gets over port disconnection ...
Hi, How VCS handles a case where:1. one out of 2 nodes cluster is stopped 2. main.cf changed (removal of cluster parameter)3. node starts. will there be a collision between the 2 nodes? something else? Thanks
Hi, Thanks for the reply, We use Storage Foundation 5.0 above Solaris 10 11/06 , Sparc. Can you describe what is the behaviour after the patch installation?What commands did you use? Thanks
We ended up setting the following: # vxdmpadm setattr enclosure EMC_CLARiiON0 recoveryoption=timebound iotimeout=10# vxdmpadm settune dmp_retry_count=2# vxdmpadm settune dmp_failed_io_threshold=60 Plus qla2300 driver configuration... Thanks for the r...
Hi,This is what I got from support, tried it and it didn't help as my server hang after root disk encapsulation second reboot.Etrack incident 1014903 identifies the deadlock situation caused by vxgms driver. The workaround is to add the property 'ddi...
Hi,Nothing new yet... they say:"The hang occurs during the vxdctl enable"I sent core dumps of servers that hang and they check them.one more thing, It happened more often after unencapsulating the root disk with vxunroot command, but sometimes after ...
Hi Vinay, Sorry but I don't have a solution yet... I'm in touch with Symantec support... nothing can identify the problem yet... they recommended installing maintanence pack 1 and a change in our configuration but the problem can't be identified yet.