I have been experiencing backup failures for quite awhile now. I have been through Symantec support and they are convinced it is hardware error, which seems likely. The only problem is that I have changed out all HW and the errors still occur.
In short the backups hang with what seems to be some kind of SCSI error. First entry in the system event log after the error is event id#9. (I realize that Symantec does not "entertain" event id 9, but please read on) This error occurs at the same time that the last server before the error is finished being backed up. It never happens in the middle of writing data, only at the end of a job, or while switching between servers in a job.
I was looking at the ADAMM log today and noticed this entry logged at the same time as the first event#9 in the system log. Can a Symantec tech please give me some info on this error?
[1764] 05/15/07 22:00:33.501 PvlSession DismountMedia( 1, 1, 48 )
Job = {73C64A72-0EAA-4A13-9CEC-847866F28CF0} "MEI_DIFF_DLTS4"
Changer = {1DCBF818-9A85-4E88-9AB7-B0CB9A789D0D} "QUANTUM 4"
Drive = {BDCE0785-7318-4737-8DC7-7719A6BC1BA5} "QUANTUM 3"
Slot = 7
Media = {79754CD5-EF53-4FCB-92C1-224F8F47F971} "DLTS40002"
ERROR = 0xE000820A (E_CHG_HARDWARE)
I have already implemented the fixes suggested in the Symantec KB articles that are usually supplied when troubleshooting HW issues. KB 191158, and 278111 for example.
Symantec techs: Case numbers can be provided if more info about previous troubleshooting is helpful.
Thanks, I really need to get this figured out.
edit for random smilies
Message Edited by Adam Stern on 05-16-200702:30 PM
Message Edited by Adam Stern on 05-16-200702:30 PM