Backup ejects tape even though the eject media check box is not checked

[1_ddd]

Have any idea why the tape gets ejected at the end of a backup job when the eject media check box is not checked

[tejashree_Bhate]

Hello,

Initially please check for pending alerts from the alerts tab and respond to them
2]Ensure sufficient amount of space is available on the tape for the backup job.

3]Create a new backup job. Create a small selection list and take backup.Verify if the media ejects after the backup.

4]To isolate this issue take the backup by using Windows NTbackup and check if the tape ejects.

Thanks,
NOTE : If we do not receive your reply within two business days, this post would be marked assumed answered and would be moved to answered questions pool.

[uz]

might be the tapedevice driver.
Had this once with VS80 tape drive using microsoft P&P driver. After changing to veritas driver the problem was gone.
If you are already using veritas or third party driver, try updating them to the latest available one.

regards

uz

[Deepali_Badave]

Hello,

We want to know if the solution provided has helped you in getting resolve your problem?

We also suggest you to install the latest Veritas device drivers using following link:-
http://seer.support.veritas.com/docs/275676.htm


NOTE : If we do not receive your reply within two business days, this post would be marked assumed answered and would be moved to answered questions pool