I recently moved my BE 9.1 installation to a new server following the instructions in Article 260054. Everything seemed to work pretty well (with the exception that the migration process is far too manual) but I can't get the tape drives to come back online.
I have BE installed in a Dell PE 2550 server connected to a Dell/EMC AX100 SAN and a Dell PV 136T Tape Library with 3 drives. When I first started the services after the migration, BE saw the library and could see all the tapes in the different slots, but all of the drives were marked "Disabled" and I couldn't enable them. I followed another article that I found on the Veritas Support site to remove each of the drives and then allowing BE to reinstall them. I have used the tapeinst.exe program to make sure the drivers were removed and reinstalled. I used BEUtility.exe to check and repair the database. Now, with the last attempt, I have gotten 1 of the 3 drives to show up, but when I try to catalog a tape, the job just sits there and never loads the tape.
Any help would be much appreciated as my SAN is getting quite full doing all of the backups.
Thanks in advance,
Kevin M. Saucier