07-23-2012 06:44 AM
07-25-2012 06:42 AM
Check your zoning Rocky...make sure that the zone is correct (HBA from server in the zone along with the tape library), and that the zone is active.
07-23-2012 06:45 AM
Any help would be appreciated.
Thank You
07-23-2012 06:50 AM
Connect the Tape Library to the Server and ensure that its properly detected in Windows Device Manager. Ones its detected there then Backup Exec will grab the data from there and will show up in Backup Exec console too.
Thanks,
-Sush...
07-23-2012 07:09 AM
Hello Sush,
I just connected the backup server with IBM TS 3100 Tape backup library through network cable but i can't see it on disk management on the server.
Should I connect them via USB cable? or it doesn't matter?
Thank you for all your help since this is my first time that i am connecting tape backup with symantec!!!
07-23-2012 07:12 AM
How to configure tape devices with BE: http://symantec.com/docs/TECH42823
07-23-2012 07:14 AM
07-23-2012 07:14 AM
Network port on library is just for management.
For data connectivity, libraries will have FC or SAS connections. You should have the same kind of card in the backup server so that you connect both.
07-23-2012 08:39 AM
Thank you so much Kiran and ZeRoc00L what a great link to have...but i don't know somehow it doesn't show in device manager (I attached the screen shot)
I connect it via fiber channel then assing an ip address and also with Ethernet cable i connect server to tape library but to no avail..
Any help would be appreciated (you don't beleive how frustrating it is)
Thank You
07-23-2012 08:44 AM
Thank you so much Kiran and ZeRoc00L what a great link to have...but i don't know somehow it doesn't show in device manager (I attached the screen shot)
I connect it via fiber channel then assing an ip address and also with Ethernet cable i connect server to tape library but to no avail..
Any help would be appreciated (you don't beleive how frustrating it is)
Thank You
07-23-2012 08:55 AM
Make sure the cable and HBA card you used to connect tape library with media server is good. If you have any other working cable inplace, use it to connect library and server and check. Remove the cable from tape library side and check for light inside the cable connector. If no light is present, either the cable or HBA is faulty. Remove the cable from HBA and see inside the HBA port for the light. If HBA is not faulty, it should also show light in one connector.
If everything seems fine, do a powercycle of server and library. shutdown library and media server. Poweron library and let it complete it's inventory. Once it comes to ready state, power on the server and check under Device Manager.
07-23-2012 11:01 AM
The USB device in your screenshot is not your library.
I do not see any Fibre Adapters in your server, or is it listed under Storage Controllers?
Also make sure FC zoning is configured properly.
07-23-2012 11:13 AM
I attached the screenshot...is that help...is there anything that i have to do?
07-23-2012 11:17 AM
The backup exec server in which is writing the backup to disk and my manager bought a tape library which i never configured that wants me to connect to tape instead of disk.
My question is if i reboot the backup server now, it is not going to lost any connection to the other servers? I mean that the symantecserviceaccount on those servers is not going to mess up if i reboot the server?
Thank You
07-23-2012 12:11 PM
No, I still don't see a FC adapter.
Do you have any installed in your server ?
07-23-2012 12:12 PM
You can safely reboot your server.
During reboot, check if you see any notifications about a Fibre Adapter.
07-23-2012 01:16 PM
...whoops...I spotted it!!! QLogic Fibre Channel Adapter. (right under Storage Controllers!).
The OP has an FC HBA so he is good to go!
07-23-2012 01:18 PM
...this looks like a zoning issue. Neither your tape drive nor the robotics are showing in Device Manager. As such, this isn't a Symantec issue.
Log onto the FC switches and check your zoning as a couple of the guys have mentioned. You will have a zone (or SHOULD have a zone!) with the server HBA and the tape drive. If it exists, make sure it is activated.
Once done, reboot the server once more (you can try a device rescan in DM) and see if the library shows up then!
THnaks!
07-24-2012 12:03 AM
07-24-2012 12:05 AM
07-24-2012 12:06 AM