Hey we have a Proliant DL 380 G5 with an internal LSI Controller, and using OS Netware 6.5 with Sp 8.
We are backing up with Backup Exec Version 9.2 Driber Pack 3.
It´s always running for a while and then the erros occurs.
Error on HA:2 ID:4 LUN:0 HP ULTRIUM920 DRV.
A hardware error has been detected during this operation. This
media should not be used for any additional backup operations.
Data written to this media prior to the error may still be
restored.
Possible corrective actions for this error are:
1.) Use a different media
2.) Check the SCSI cabling.
Vendor: HP
Product: ULTRIUM920 DRV
ID:
Firmware: D23W
Function: Write(5)
Error: A hardware failure has occurred on drive HA:2 ID:4
LUN:0 HP ULTRIUM920 DRV. Please consult the job log for
details.(10)
Sense Data:
70 00 0b 00 - 00 00 00 10 - 00 00 00 00 - 47 03 00 00
00 00 00 00 - 00 00 00 00 - 00 00 00 00 - 00 00 00 00
Total directories: 10
Total files: 369
Total bytes: 144,246,802 (137.5 Megabytes)
Total time: 00:01:13
Job completed: Job did NOT complete - A drive failure was detected. (2-
4623)
Here the Controller and Autloloader etc Tape Drive Versions.
0x07 [V358-A1] LSI_53C1030:00003 [slot 3]
0x1D [V358-A1-D4:1] HP 1x8 G2 AUTOLDR 2.60
0x1C [V358-A1-D4:0] HP Ultrium 3-SCSI D23W
The suggested switch : load lsimptnw.ham slot= 4 qtag=off don´t work !!
We have changed the Libary the Tape drive the scsi cable but nothing helps .
Hay anybody a solution.
