06-18-2012 06:01 AM
I have installed/uninstalled BackupExec 2012 for the third time - am still unable to get the deduplication option to work. All the dedupe services are set to disabled in the services manager -- is this correct ?
I have installed the latest drivers from DataDomain to support BE2012. I am able to backup to the DataDomain box, but get the "client-side deuplication is enabled for this job, but could not be used" error message.
Direct access sharing shows the device has been shared with this server. The direct access properties are empty (except for logon account) so it appears the BE server is not talking with my DataDomain box.
On a side note, the dedupe stuff is working fine in my existing BE2010 environment
06-18-2012 07:41 AM
Hi,
That isn't right...make them Automatic and start them up. Also make sure that SP1a is installed for BE 2012 as this fixes a number of issues, and adds a couple of (minor?) enhancements to BE 2012.
Thanks!
06-18-2012 08:12 AM
I didnt think that seemed right -- I have tried changing to automatic and starting them (multiple times) but I get an "incorrect function" error message when they attempt to start (the Postgres service does not start either) - I have looked through Symantec's help and found some things regarding directories that weren't created correctly, registry changes...but nothing has helped so far...
The services also change themselves back to Disabled when the server is rebooted
SP1a is installed
06-18-2012 08:16 AM
Dear Sir:
In your BE 2012 installation, is a dedupe folder or appliance already created and working? The Dedupe services are not anabled unitl a folder is created.
When you say the existing 2010 install is working, then where is the 2012 install, in another machine or a virtual, and which one is finally connected to the data domain?
Also, how much RAM do you have on the BE 2012 install? And what is the model of the Data Domain device you are mentioning?
06-19-2012 03:58 PM
Its an OST devcie so the service wont be configured. The services wont be configured unless you are using a deduep folder on the server.
Also make sure the OST device is configured as per this doc http://www.symantec.com/docs/TECH139902 . I know it says 2010 but the process is the same for 2012.
Finaly to use client side deduep the plug-in must be installed on each remote server.
If the OST server is configured correctly, the plug-in is installed on the remote servers, and client side still fails. Then a support case should be opened so the issue can be investagated further.
06-19-2012 06:33 PM
When the plug-in is all setup and cocnfigured right with BOOST licensed on the DataDomain. Backups are really fast. About 7000MB/min, fast. This with 10GbE and a DD670 on DDOS4.9. It's even faster in newer 5.x releases.
06-20-2012 04:04 AM
The dedupe services on my BE2010 server are set to manual (not disabled) which is why I am confused....did they change with BE2012?
I am not using a dedupe folder, I have the plug-in installed on all remote servers, etc, I used the document in your link to set up my BE2010 dedupe which is working fine....time to open a support case it looks like...
06-20-2012 04:05 AM
You are right -- in my production BE2010 environment - it works great !!
06-20-2012 04:08 AM
I am not using a dedupe folder in my BE2012 environment -- just the DataDomain appliance. The DD is working fine in my production BE2010 environment (different server, different backup targets, etc).
I have 12GB of memory on my BE2012 server - the DataDomain box is a DD160 with the latest drivers/patches
09-17-2012 11:07 PM
I have the same problem at one of our customers. Have you a solution?
09-18-2012 05:10 AM
No solution -- I have given up on BE2012 until they come out with the next version
09-18-2012 01:28 PM
Hi Mark,
We are getting some "ops" with deduplication 2012 but it´s working. Some jobs do not accept, some jobs accept and some jobs shows not able to use deduplications but looking the logs, deduplications WAS used anyway.
The sevices canot be disabled and should be like that:
Agent browser - aut
Deduplication engine - aut
Deduplication manager - aut
Device & media service - aut
Error recording service -aut
Job engine - aut
Management service - aut
Puredisk filesystem service - MANUAL
Remote agent for windows - aut
Backup Exec server - aut
Must have at least 8GB fisical server memmory and 1.5GB for each 1TB Data.