10-11-2012 01:19 AM
Hi there,
We are using EV 9.0.4 and im just abot to start a new partition and during the wizard i ran the test button and got "The Connection Response time is rated as 'Bad'. Do you want to Continue"
Its a Vm using a local drive on the server, well its on the SAN but not using remote storage.
How come its got this bad rating?
Thanks
Solved! Go to Solution.
10-11-2012 12:26 PM
Its the average response of up to 4 pings per vault store.
up to 1ms = good
1ms - 10ms = bad
> 10ms = very bad
One slightly slow ping can blow the whole test result (i.e it becomes bad). I see this happen quite often on VMWare. To confirm just set up a continuous ping from one server to another and look for the occasional 'blip'. eg
ping SERVERNAME -t
Regards,
Jeff
10-11-2012 01:25 AM
Refer to the below forum thread
https://www-secure.symantec.com/connect/forums/ev-80-adding-new-vault-store-partition
10-11-2012 11:24 AM
have you tried running the test a couple times? you should be fine to proceed since you say its all local storage.
10-11-2012 12:26 PM
Its the average response of up to 4 pings per vault store.
up to 1ms = good
1ms - 10ms = bad
> 10ms = very bad
One slightly slow ping can blow the whole test result (i.e it becomes bad). I see this happen quite often on VMWare. To confirm just set up a continuous ping from one server to another and look for the occasional 'blip'. eg
ping SERVERNAME -t
Regards,
Jeff
10-12-2012 01:06 AM
Thanks guys for you responses, yes i ran it a couple of times it the third one came back Good.... seems a bit of a pants test to me!
Thanks again.