01-12-2013 02:26 AM
Hi All,
How media gets mounted onto tape drive ???????
how NBU selects media for mount ?????
how media mount numbers are different for different media ????????
what depicts number of media mounts ??????
Do we have any suporting algorithm for media mount ??????
Please edcate me on this.
Regards,
Bharath Achar
Solved! Go to Solution.
01-12-2013 02:51 AM
hi,
go ahead and read the admin guide 2---> reference topics-->How Netbackup Selects media.
http://www.symantec.com/business/support/index?page=content&id=DOC5158
I would suggest you to read all that reference topics.. it will answer lot of your questions..
Good luck.
01-12-2013 02:51 AM
hi,
go ahead and read the admin guide 2---> reference topics-->How Netbackup Selects media.
http://www.symantec.com/business/support/index?page=content&id=DOC5158
I would suggest you to read all that reference topics.. it will answer lot of your questions..
Good luck.
01-12-2013 03:29 AM
Thanks for the information.
But why we have different mounts for different tapes ?????
regards,
Bharath Achar
01-12-2013 04:09 AM
hi,
are you talking about the number of Mounts, that you seen in the Media attributes?
if you would have read the above reference topic, you might have understand that they are different media selection process to chose media for backup .
so based on those EMM will chose the medias,and number of mounts always depends on how many times EMM server selected and used that media for bakup,
so its like EMM selection to sepcific media is directly proportional to the Number of Mounts.
everyting is controled and managed by EMM server, you does not need to worry about all these...
and if you are thinking to keep the Max number of mounts and expire date for media, that is actaully not require.
if netbackup find that media causing issue. it will freeze that media to avoide further use and you can repalce that.
hope it make some sense.
01-14-2013 06:25 AM
Thanks for the detailed response. Its exactly what I was looking for !!
I do have one more questions.
In reference to one of the media selection step :
If more than one volume qualifies, NetBackup chooses the volume that was
least recently used.
Is there any way for me to change how netbackup chooses the tape with the lease mounts to selecting a tape with the most mounts ??????????????
Please help me on this as soon as possible.
Regards,
bharath
01-14-2013 07:03 AM
There is no way to change NBU's method of selecting media. (Unless yo manaually want to move tapes out of the robot or manually assigning media to specific pools.)
There is normally no need to 'micro-manage' NBU media.
Do you have a specific reason for your request?
01-14-2013 07:07 AM
agreed with Marianne.
you can not chage the selection method, does not requrire the micro management.
01-14-2013 07:52 AM
Yes,
some tapes are mounted several times and some are mounted hardly anytime.
I would like have all tapes utilized equally.
Any inputs from you would be much appreciated.
Regards,
Bharath
01-14-2013 09:58 AM
About the only thing you can do that I can think of is reduce the number of partially full media per volume group (this is set in he voume group itself).
Don't make this lower than the number of drives you wish to use at the same time.
Martin
01-15-2013 12:15 AM
Is there any way for me to change how netbackup chooses the tape with the lease mounts to selecting a tape with the most mounts ??????????????
and
some tapes are mounted several times and some are mounted hardly anytime.
I would like have all tapes utilized equally.
These seem contradictory - if you *could* change "to selecting a tape with the most mounts" then the situation would be worse i.e. some tapes will constantly be re-used in preference to others that will hardly ever.