cancel
Showing results for 
Search instead for 
Did you mean: 

NETBACKUP 4.5 connection problems

manol4ik
Level 5
Partner Accredited

im using netbackup 4.5 under solaris 9 platform and when i changed a bad drive i started have this issue

 

 

 

after that i cant send any job, because i lose the conection with the library, and netbackup is just showing like its looking for media

 

 

thanks for the help

 

 

Alejandro

1 ACCEPTED SOLUTION

Accepted Solutions

Marianne
Moderator
Moderator
Partner    VIP    Accredited Certified

The Screendump is too small to see anything.

You are losing connectivity to the library?

Please do the following to start NBU Media Management daemons in verbose mode:

vi /usr/openv/volmgr/vm.conf

(add this line:)

VERBOSE

 

Stop/start NBU.

You will see hardware related logs in /var/adm/messages.

If connection to the robot is lost, you might need to double-check physical hardware connectivity - cables, terminators, Fibre/SCSI bridge (whatever connection method is used). There might be a SCSI cable that wasn't properly tightened when drive was replaced or even pins that got bent.

I'd be interested to see entries in /var/adm/messages.

View solution in original post

1 REPLY 1

Marianne
Moderator
Moderator
Partner    VIP    Accredited Certified

The Screendump is too small to see anything.

You are losing connectivity to the library?

Please do the following to start NBU Media Management daemons in verbose mode:

vi /usr/openv/volmgr/vm.conf

(add this line:)

VERBOSE

 

Stop/start NBU.

You will see hardware related logs in /var/adm/messages.

If connection to the robot is lost, you might need to double-check physical hardware connectivity - cables, terminators, Fibre/SCSI bridge (whatever connection method is used). There might be a SCSI cable that wasn't properly tightened when drive was replaced or even pins that got bent.

I'd be interested to see entries in /var/adm/messages.