06-22-2016 03:26 AM
I tried ejecting media tape from robot and successfully ejected but when i pull out the magazine tape is not there and i noticed that it is in the Standalone Residence..... how can i remove the tape from there and replace it with a new one?
06-22-2016 03:41 AM
If you click 'Yes' at the last screen to continue (without removing tapes) the tapes will be returned to their slots.
You will need to Inventory the robot again, then use these steps to eject:
Select tapes to be ejected in the Media GUI.
Right-click, eject.
Wait for the next pop up.
Click “Yes” to continue.
When "Remove ejected media...." message is displayed, you can go to the Library and remove the tapes from the mailslot/cap.
Only reply “Yes” once you have removed the tapes from the cap.
PS:
Which make/model tape library?
06-22-2016 04:27 AM
Hi Mariane
thanks for replying to my query.
what i did earlier....If i Click YES in eject from Media Access Port i am receiving completed with error but i tried selecting NO then it was successfully ejected from the robot but it was placed in Standalone in Mailslot ....i open MailSlot Mag and remove the tape .....
is there any problem on the procedure that i did?
Model: Storagetek SL 150
Netbackup 7.6
Regards,
Jason