11-12-2008 03:40 AM
Master = 5.1 Solaris 9 v440
(s)San Media = 5.1 Solaris 10 M5000
It's been umpteen years since I messed with SSO....
But here I am... I have to configure 2 San Media servers to share one lto3
tape drive....
What steps do I need to set this up?
Thanks.........
Joe Despres
Solved! Go to Solution.
11-14-2008 08:16 AM
Here's what I did:
I ran tpautoconf -a on both nodes.... This created the tape drives as stand-alone.
I then ran tpconfig to add the robot and to update the drives...
The system automagically picked them up with SSO...
Thanks...
Joe Despres
11-12-2008 07:55 AM
get sso license installed
zone tape drives to san media servers.
make sure you can see the drives from the san media servers.
set them up as media servers on the master and add your storage units.
11-14-2008 08:16 AM
Here's what I did:
I ran tpautoconf -a on both nodes.... This created the tape drives as stand-alone.
I then ran tpconfig to add the robot and to update the drives...
The system automagically picked them up with SSO...
Thanks...
Joe Despres