09-24-2010 09:04 AM
Currently , i have 6 x LTO3 drives with drive 2 and Drive 4 configued as NDMP direct backup.
I will have below error when both on the NDMP drives are used for Vaulting or Backup .
The restore job detail didnt prompt that drives are in use .
It is normal behaviour?
9/24/2010 5:38:27 PM - begin Restore
9/24/2010 5:38:28 PM - media ABC657 required
9/24/2010 5:38:28 PM - restoring image NAS01042_1278014460
9/24/2010 5:38:35 PM - connecting
9/24/2010 5:38:35 PM - connected; connect time: 00:00:00
9/24/2010 5:38:35 PM - started process bptm (6120)
9/24/2010 5:38:39 PM - Error bptm(pid=6120) unexpected return value from db_FLISTreceive: no entity was found 227
9/24/2010 5:38:42 PM - Error ndmpagent(pid=2056) terminated by parent process
9/24/2010 5:38:45 PM - Error ndmpagent(pid=2056) NDMP restore failed from path UNKNOWN
9/24/2010 5:38:50 PM - Error bpbrm(pid=552) client restore EXIT STATUS -1: invalid error number
9/24/2010 5:38:50 PM - restored image NAS01042_1278014460 - (socket read failed(23)); restore time 00:00:22
9/24/2010 5:38:53 PM - end Restore; elapsed time: 00:00:26
the restore failed to recover the requested files(5)
Solved! Go to Solution.
09-28-2010 09:30 AM
media header corrupted .
Run import phase 1 and 2 . restoration successful.
09-27-2010 03:41 AM
Which NBU version? The resource broker (nbrb) in NBU 6.x should be aware of drives in use.
Resource allocation up to 5.1 was practically non-existent (except for backups where resource allocations were done by bpsched).
09-28-2010 09:30 AM
media header corrupted .
Run import phase 1 and 2 . restoration successful.