Subscribe to NBU notifications
In case you are not aware - you can subscribe to NBU notifications over here: https://sort.veritas.com/spec_doc Hopefully NBU 9 will be added to the list soon.
In case you are not aware - you can subscribe to NBU notifications over here: https://sort.veritas.com/spec_doc Hopefully NBU 9 will be added to the list soon.
Hi, Our Symantec Veritas Netbackup 6.5 nbemm daemon always stop and I saw an error like nbemm returned an extended error status: CORBA transient error(3000001). What is the cause of this problem and How to solve it. Thanks
We are happy to announce the launch of two new communities of Symantec Connect: Backup & Recovery and Archiving &eDiscovery. These two new communities are a result of splitting the existing Backup and Archiving community to better su...
Hi, Our Symantec Veritas Netbackup 6.5 nbemm daemon always stop and I saw an error like nbemm returned an extended error status: CORBA transient error(3000001). What is the cause of this problem and How to solve it. Thanks
Hi everyone, I have been tasked with recovering some legacy notes data for a client (tapes from 2006). I have successfully imported the images, but when trying to do the restore, I find, unsurprisingly, that I appear to need a Notes / Domino server t...
Hello. Windows 2003 Netbackup 7.1 I’m about to setup a virtual storage unit for a couple of SAN media servers that are part of a Windows exchange cluster. There is also a small amount of file data that needs to be backed up on the shared disks. I ...
Hi , I am trying to take a backup of exchange 2010 DAG directly on tape . during snapshot process backup becomes stuck. i am attaching a bpfis logs for the reference. thanking in advance. Usman
difference between /vmquery -b -pn Scratch|wc -l 66 and vmquery -pn Scratch|wc –l 1336 ------------------------------------------------------- sudo ./vmquery -pn Scratch sudo ./vmquery -b -pn Scratch ------------------------------------------...
I need to delete many clients from multiple policies in NetBackup. Some of these clients are defined in multiple policies. is there a command line to delete those clients from all policies they exist in? Best Regards, Sara
Hi All, Can any body provide me the document for DATA DOMAIN in Netbackup and all the data domain related commands.
when i run inventory,i see moving media from standalone to slot 12------> i can understand this(from cap to robot slot). But then it also says moving media from slot 11 to stanalone. What does that mean basically?
We are using NBU 7.1 and EV 10, I checked the NBU EV agent document, the EV_INDEX_LOCATION only able to backup all the indexes within a site. Is there any configration can be done to make it only back open indexes or close indexes? The reason is our ...
Is it possible to run a bparchive cmd against files and folders on a NetApp CIFS share. Have confimed permissions between the W2K8 Media Sever and the CIFS share. I am getting various errors so either it isn't possible or there is an error in my logi...
Master Server: udin06 - (Solaris10 – NBU 7.1) Client: sdib, or sdin (two interfaces, B at end is the backup interface) – Solaris10 Backup failing with Status 25, cannot connect or socket. Through GUI hostproperties too, it doesnt connect. IP address...
Hello, I am running Netbackup 7.1 (windows 2008) I would like to configure an account in my netbackup server (windows) in order to allow an user to just do restores (any restore from any server). As far as I can reach the NBAC can do this. However N...
Hello, We are working a problem (error 25 "cannot connect on socket) with our DMZ esx hosts. They both fail during, what I refer to as stage one. The firewalls are not recording any drops to either the master, proxy, vcenter, or the esx host. Any h...
I write all my backups to two virtual tape libraries for redundancy. (VTLA & VTLB) I duplicate to physical tape using two mediaservers. (M3 and M4, each has two hba connections to each VTL) I have 13 LTO5 physical drives which are shared on M3 and M4...
Hello All, Does any one have an idea of how i can lay my hand on veritas Netbackup 7.x Cbt nugget? Thank you.
Hello, everybody, i have a problme about BMR restore, detailed enviorment as follows: NBU master(BMR master/BMR boot server): 7.0.1, SuSE 11 SP1 / NBU Client: 7.0.1, SuSE 10 SP2. BMR backup is OK, when restoring BMR via network to the same client, re...
I tried the VM backups in 7.1 and they left orpahned VMDK's all over. Is V-ray going to fix this?
Hi All, I have read the BMR Admin Guide , but still having some query how can we rebuild a server from BMR restore , could you please provide me any video link what are the steps need to be taken before performing this activity .