Can we assume that you are fine with physical connectivity?
That you know that the robot can be daisy-chained to one of the drives and that each drive should ideally be connected to dedicated scsi hba on the server? That if devices are HVD you need to ensure that you have HVD hba's in the server and not plug into the onboard SE/LVD cards?
That you understand that you will need a seriously powerful machine to stream multiple tape drives simultaneously and that the speed at which data is received from client should match the speed at which tape drives can write?
If drives and robot are physically connected, you need to ensure that the OS sees the devices.
Run devfsadm -C -c tape.
This should populate /dev/rmt device tree.
Once this is fine, run /usr/openv/volmgr/bin/sgscan
If robot and tape drives are visible, you are ready to add to NBU. If not. rebuild the sg driver as follows:
# cd /usr/openv/volmgr/bin/driver
# /usr/openv/volmgr/bin/sg.build all -mt <15> -ml <1>
Install the new sg driver configuration:
# /usr/bin/rm -f /kernel/drv/sg.conf
# /usr/openv/volmgr/bin/driver/sg.install
Check/verify config:
# /usr/openv/volmgr/bin/sgscan
Once sgscan sees the robot and tape drives, run Device Config wizard in NBU.
