the requested operation was partially successful(1)

[MariusD]

 A windows backup finish always with Exit Status :the requested operation was partially successful(1) and the error is this :"Warning bpbrm(pid=2360) from client xxxx-xxxx: WRN - can't open object: Shadow Copy Components: (BEDS 0xE000FECB: A failure occurred accessing the backup component document.)"

What can I do to end this job with exit status 0?

Thanks
Regards,

Marius Demeter

[Andy_Welburn]

A backup of the Shadow Copy Components of Windows 2008 server / Windows Vista fails with error "can...

[David_McMullin]

Add these files to your exclude list, or do not use ALL_LOCAL _DRIVES, instead specify what you want to back up.

If you want to backup the VSS, you should check out these links:

http://seer.entsupport.symantec.com/docs/337226.htm - Shadow Copy Components:\ backup ends with status 1.
http://seer.entsupport.symantec.com/docs/283377.htm - How to verify Windows Open File Backup operation using VSSADMIN and BPFIS before contacting Symantec Technical Support
http://seer.entsupport.symantec.com/docs/321181.htm - Volume Shadow Copy Service (VSS) Information and Troubleshooting VSS issues.

[MariusD]

Windows 2003 32bit.

Which file can I add in exclude list?? 

f"Warning bpbrm(pid=2360) from client xxxx-xxxx: WRN - can't open object: Shadow Copy Components: (BEDS 0xE000FECB: A failure occurred accessing the backup component document.)"

Regards
Marius Demeter

[Andy_Welburn]

Event Viewer on client when the backup runs?

[MariusD]

I must to ask my customer about "Event Viewer" from the backup time. 
Ok, Thanks.
 

[David_McMullin]

I run a report daily to check just what files were not backed up -

OUTFILE =/tmp/windows.bad.list
date > $OUTFILE
#for clients in policy
# added colums 90 for better paging, 140 is a good alternative for 1 line.
for i in `/usr/openv/netbackup/bin/admincmd/bppllist WINDOWS.POLICY.PROD | grep CLIENT | cut -f 2 -d " "`
do
   echo "Errors on Server: "$i  >> $OUTFILE
   echo  " " >> $OUTFILE
   /usr/openv/netbackup/bin/admincmd/bperror -U -columns 90 -problems -client $i -hoursago 24 >> $OUTFILE
   echo " " >> $OUTFILE
done

mail $OUTFILE to someone who cares for review!

[Andy_Welburn]

to make our lives that little bit easier on a day-to-day basis!

Altho' I would be a little more concerned with an EC1 for System State etc ;)

[Claudio_Veronez]

Take care w/ N-lite made iso.

is corrupts som componets that netbackup uses to Shadow Copy/ system state and BMR.