About alienjoker

alienjoker · 06-14-2009

Hi all, I've run into a bizarre problem since upgrading Backup Exec from 11 to 12. Everything was working fine before the upgrade but now I just can't seem to get Backup Exec to recognise the Library correctly. The interesting thing is that this isn...

alienjoker · 09-28-2009

Hi all, I encountered the exact same problem using iSCSI array and also an HDS AMS 1000 (FC) SAN in association with RDMs and VMware behind VEA. To rectify the issue with disappearing shares, initially I enabled the latestart feature which did brin...

alienjoker · 06-15-2009

Ok, so on the second system, I thought I'd keep as much constant as possible. So this time, just recabled the SAS connection to drive 1 on the library. I did a quick scan in device manager and then rebooted both the library and server. (please note...

alienjoker · 06-15-2009

Ok, so heres the weird thing - I'd just done this before reading your post Craig Powered the library down and swapped the SAS cable to the other drive on the back of the tape library I then powered the server off and powered the tape library up. Af...

alienjoker · 06-14-2009

Unfortunately I've already tried that and it made no difference. I used Tapeinst to do this and to see whether it would clear up the mess its finding but even with or without the Symantec drivers, I get the same MISSING devices appearing. Any other ...

VOX

User Statistics

User Activity

Backup Exec - MISSING 1 and MISSING 2 Robotic Library Problems

Solution

2nd system

Changed connection

Unfortunately I've already