About Bernard_McGinle

Bernard_McGinle · 02-16-2006

We have a client with an Ultrium 448 drive which appears to be constantly resetting itself when Backup Exec 10d is installed. The drive is listed as tested under the compatibility matrix, and has been working fine under Backup Exec 10.0 as well as HP...

Bernard_McGinle · 02-21-2006

HiThe same symptoms occur with RSM enabled and disabled. The drive's led's all flash on momentarily every 10-15 seconds, according to HP's support site this indicates a reset of the drive. This has been observed consistently when attempting to access...

Bernard_McGinle · 02-20-2006

Hi,There were no alerts, and no obvious event log entries. Any attempt to access the drive will eventually timeout. This unit is on a client site, and access must be arranged in advance, so confirming this will be delayed

VOX

User Statistics

User Activity

Problems with Backup Exec 10d and HP Ultrium 448

Re: Problems with Backup Exec 10d and HP Ultrium 448

Re: Problems with Backup Exec 10d and HP Ultrium 448