04-29-2011 06:24 AM
We have recently installed be2010 on a server2008sr2 os and have attached a quantum i40. Unable to see the slots to set up a job. Any advice?
04-29-2011 06:30 AM
Do you see the Medium Changer in the Windows Device Manager. BE will detect the device only if
its detected by the OS.
04-29-2011 06:30 AM
Is your operating system able to see the library? Check out in the device manager.
If your OS is not able to see the library then BE will not.
If your OS is able to see the library, have you tried configuring the library with BE by using device configuration assistant?
Regards...
04-29-2011 07:00 AM
The OS is able to see the device.
BE can see the device, however it only sees the device not the slots within.
04-29-2011 07:05 AM
Is BE showing it as a library?
I think BE seeing it as a standalone drive, not as a robotic library.
As Amol said, check for medium changer in the device manager. If it is not there, then probably you have to look at configuring the library with windows.
Regards......
04-29-2011 07:21 AM
BE is showing it as a Stand Alone Drive.
The drive does show in the device manager.
04-29-2011 07:30 AM
Along with the drive do you see "Medium Changer" in the device manager
04-29-2011 07:34 AM
Not just the tape drive, robotic arm will be detected as medium changer by the windows operating system if the library is properly configured.
See the image attached. (medium Changers)
Regards...
04-29-2011 07:45 AM
Device manager is showing the HP LTO ultimate drive under the Tape Drives but the Medium Changer is not showing up in the device manager.
04-29-2011 07:47 AM
A Tape Backup Medium Changer may not detect properly in the Device Manager
Resolution: Install Scsiport drivers for the HBA rather then Storport.
http://support.microsoft.com/kb/967736
04-29-2011 07:49 AM
Perform a powercycle of the server and the library in the following sequence.
1) Shutdown server and then library.
2) check all the connections
3) Switch on library let it get initialized.
4) Power on the server.
04-29-2011 08:35 AM
Thank you very much!!
BE now sees both drives and media changer is in device manager also.
04-29-2011 09:49 AM
Cheers!!! Mark the post as solution which helped you to fix the issue.