12-04-2013 07:15 AM
Hallo zusammen,
ich habe eine Vorgabe zur Umsetzung einer Backupstrategie bekommen - wie stelle ich das am cleversten an?
Täglich inkrementelle Sicherung auf B2D Speicher
Wöchentlich Fullbackup auf B2D mit Kopie auf Tape
Monatlich Fullbackup (vorzugsweise das letzte vom B2D Speicher) auf Tape (Tape soll Off-Site gelagert werden) (Januar bis Dezember sollen im Schließfach verbleiben)
Jährlich Fullbackup am Ende des Jahres auf Band
Welche MediaSets müssen angelegt werden?
Welche MediaVault muss angelegt werden?
Aufbewahrungszeiten? Überschreibschutz?
Über Hilfe wäre ich dankbar.
Grüße
12-05-2013 06:22 PM
Since you are using BE 2012, your disk storage will be managed by DLM and no media sets are required. You can set the retention period of the backup in your jobs, in the same section as when you specify the target disk storage. Nobody can tell you how to set the retention period. Only you know how long each backup set should be kept and how many backup sets that you can keep depends on the space on your disk storage. Do read these to understand how DLM works and how it affects the retention of your backup sets.
https://www-secure.symantec.com/connect/blogs/data-lifecycle-management-be-2012
https://www-secure.symantec.com/connect/articles/when-backup-sets-are-deleted-under-dlm
For tapes, again nobody can tell you how long to set your OPP and AP. It all depends on how many tapes you have and how fast you want to recycle them. Only you know that. You can create as many media sets as you want to set your OPP and AP.
12-06-2013 01:36 AM
Wichtig ist nur, dass die komplette Backup-Job-Planung in einer Stufe stattfindet. BE2012 lässt dann nur den Job mit der niedrigsten Wiederholungsrate zu.
Beispiel:
Voll-Bu jeden Freitag um 20:00 Uhr
Voll-Bu-Monat jeden letzten Freitag im Monat um 20:00 Uhr
Voll-Bu-Jahr jeden letzten Freitag im Jahr um 20:00 Uhr
hier würden ja einmal im Jahr theoretisch alle 3 Jobs laufen müssen, aber BE entscheidet sich für den Jahres-Job, der er die niedrigste Wiederholungsrate hat.
12-06-2013 06:34 PM
What you are experiencing is expected. BE 2012 is designed to superceed jobs if their start times are the same. The job with the lowest frequency will superceed the other jobs. If you want all 3 jobs to run, then stagger the start time, e.g.
Weekly job - 2000 hr
Monthly job - 2001 hr
Yearly job - 2002 hr
then all 3 jobs will start.