Using NW 6.6SP6, 39160 and BU EXEC 9.2 1401.5
BU EXEC does not recognize Dell 124T LTO3 library. Sees it only as stand-alone drive. Same server had HP Ultruim 448 library running OK (we're swapping tape libraries). Things I've done:
- enabled LUN support on adapter
- have /lun_enable=ff after driver load in startup.ncf
- have also tried just /LUN and /lun_enable=ffff
- have run SCAN ALL prior to loading BUEXEC
- have worked with Dell support and they're looking into other info
I've since switched back the HP and as satted above, it sees the robot no problem. Here's some SCSI info from bediag (when I had both drives installed):
* STARTUP.NCF *
LOAD ACPIDRV.PSM
######## End PSM Drivers ########
LOAD IDECD.CDM
LOAD SCSIHD.CDM
LOAD BAKPLANE.CDM
LOAD NWTAPE.CDM
######## End CDM Drivers ########
LOAD IDEATA.HAM SLOT=10009
LOAD PEDGE3.HAM SLOT=10012
LOAD ADPT160M.HAM SLOT=301 /LUN_ENABLE=FFFF
LOAD ADPT160M.HAM SLOT=302 /LUN_ENABLE=FFFF
LOAD MEGA_SAS.HAM SLOT=7
================================================
<#SCSI_Info>
CMD Host = BECDM.CDM
Number of Host Adapters = 5
Host Adapter 0 PEDGE3.HAM PERC HOST ADAPTE
Skipped devices on PEDGE3.HAM ...
Host Adapter 1 ADPT160M.HAM Adaptec SCSI Car
SCSI ID = 5 Lun = 0 HP Ultrium 2-SCSI (S54W), *
Host Adapter 2 MEGA_SAS.HAM MEGARAID HOST AD
SCSI ID = 0 Lun = 2 DELL PERC 5/E Adapter (1.00),
Host Adapter 3 ADPT160M.HAM Adaptec SCSI Car
SCSI ID = 5 Lun = 0 QUANTUM ULTRIUM 3 (2023), *
Host Adapter 4 Vetitas VirtHBA Vetitas VirtMGR
</SCSI_Info>
==================================================
------------------ Devices In Host Bus Adapter Order ------------------------
Drive ( 01,05,00 ) HP Ultrium 2-SCSI S54W
Drive ( 03,05,00 ) QUANTUM ULTRIUM 3 20236216-
952
------------------ Devices In Application Order ----------------------------
Robot ( 01,05,01 ) HP 1x8 autoloader 1.50 CPHRL7A.NLM
Drive ( 01,05,00 ) HP ULTRIUM448 DRV S54W CPHRL7A.NLM
Drive ( 03,05,00 ) QUANTUM ULTRIUM 3 2023 ULTRIUM.NLM
------------------ Serial Numbers -------------------------------------------
Drive ( 01,05,00 ) Serial Number = HU106118CP
Drive ( 03,05,00 ) Serial Number = JN0746AME50528
------------------ Robot Information ---------------------------------------
The following information is from Robot: ( 01,05,1 )
HP 1x8 autoloader
Number of Drives = 001 FirstDTE = 0000
Number of Slots = 000 First_SSE = 0000
Robot Serial Number = HU106118CP
Robot DTE_01 Serial Number = HU106118CP
ANY help will be appreciated!
