Windows Server 2003, Service Pack 1
Veritas Backup Exec Version 10.0, Rev.5484. Installed updates: Service Pack 4 and 3, Hot Fix 36 and 37.
Use two devices: HP Ultrium 460 and HP StorageWorks 1/8 Ultrium 448 AutoLoader. Firmware on both devices was updated to F60D and S54W.
Autoloader not correct recognized by Veritas and use as Stand-alone Drives, not as Robotic Libraries. In adamm.log next message:
0002:0000:0005:0000 Device Name "\\.\Tape0"
Secondary Name "\\?\scsi#sequential&ven_hp&prod_ultrium_2-scsi&rev_s54w#6&6a6d373&0&050#{53f5630b-b6bf-11d0-94f2-00a0c91efb8b}"
Primary Inquiry "HP Ultrium 2-SCSI S54W"
Serial Number "HP Ultrium 2-SCSI HU105434Y1"
Device Flags SCSI, SN(TYPE 1)
Device State 3, Online
Device IDs 1003, {267DBA5D-1DF4-4227-8BEE-C936E0CE36FB}
Device Name "HP 2"
Device Type 134283265, "LTO 64K (64K,10,0,E,HU)"
Device Features 0x000BFB7F
Device Element 0, 0
0002:0000:0005:0001 Device Name ""
Secondary Name "\\.\Changer0"
Primary Inquiry "HP 1x8 autoloader 1.46"
Serial Number ""
Device Flags SCSI
Device State 1, Offline, ERROR = 0x0000007B (ERROR_INVALID_NAME)